View all water resistant filaments Water resistant View by property 3D filament 123-3D carbon PETG filament 1.75mm, 0.5kg carbon 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D carbon PETG filament 1.75mm, 0.5kg

Description The carbon PETG filament contains 20% carbon particles. This gives 3D-printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is stiffer and more heat and impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	5.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE08000
Length:	170 m

£25.08 (sold out) (Incl. 20% VAT)
(£20.90 Excl. 20% VAT)

123-3D Filament Gray 1.75 mm ASA 1 kg

Zoom in

2
1
0

Description This gray ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75 mm and there is 1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP01104

Order now, we can ship this on Monday!

£29.50 (Incl. 20% VAT)
(£24.58 Excl. 20% VAT)

in stock

123-3D green PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example, it is a hydrophobic material that does not absorb water. The green 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	green	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-250 °C	Spool width:	7.8 cm
Amount:	1 kg	Hazard class:	n/a
Length:	340 m	Our item no:	DFE11005

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D sky blue PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example, it is a hydrophobic material that does not absorb water. The sky blue 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 30.0 cm
Colour:	sky blue	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	220-250 °C	Spool width:	10.5 cm
Amount:	2.3 kg	Hazard class:	n/a
Length:	750 m	Our item no:	DFE11024

Order now, we can ship this on Monday!

£43.96 (Incl. 20% VAT)
(£36.63 Excl. 20% VAT)

in stock

123-3D Filament Neutral 1.75 mm ASA 1 kg (Jupiter series)

Zoom in

2
1
0

Description This neutral ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75 mm and there is 1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Inner diameter:	Ø 5.2 cm
Colour:	neutral	Spool width:	6.8 cm
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP01106

Order now, we can ship this on Monday!

£29.50 (Incl. 20% VAT)
(£24.58 Excl. 20% VAT)

in stock

123-3D red PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example it is a hydrophobic material that does not absorb water. The red 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-250 °C	Spool width:	7.8 cm
Amount:	1 kg	Hazard class:	n/a
Length:	325 m	Our item no:	DFE11004

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D red PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example it is a hydrophobic material that does not absorb water. The red 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 30.0 cm
Colour:	red	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	220-250 °C	Spool width:	10.5 cm
Amount:	2.3 kg	Hazard class:	n/a
Length:	750 m	Our item no:	DFE11025

This product is end of life.

123-3D transparent PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example, it is a hydrophobic material that does not absorb water. The transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Spool width:	7.8 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE11002
Length:	325 m

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D tranparent PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example, it is a hydrophobic material that does not absorb water. The black 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	transparent	Spool width:	10.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	2.3 kg	Our item no:	DFE11030
Length:	750 m

Order now, we can ship this on Monday!

£43.96 (Incl. 20% VAT)
(£36.63 Excl. 20% VAT)

in stock

123-3D transparent blue PETG filament 1.75mm,1 kg

Zoom in

2
1
0

Description PETG filament from the Jupiter series from 123-3D.nl is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, it has completely unique properties, such as it is a hydrophobic material that does not absorb water. The transparent blue 1.75 mm PETG is a slightly flexible filament that allows you to easily 3D print without odors.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG Transparant	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	65-85 °C	Spool width:	6.8 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	225-245 °C	Our item no:	DFP01177
Amount:	1 kg	Replaces item no:	DFE11007
Brand:	123-3D

Order now, we can ship this on Monday!

£23.75 (Incl. 20% VAT)
(£19.79 Excl. 20% VAT)

in stock

123-3D transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example, it is a hydrophobic material that does not absorb water. The yellow transparent 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	transparent yellow	Spool width:	7.8 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE11009
Length:	325 m

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D transparent green PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example it is a hydrophobic material that does not absorb water. The green transparent 1.75mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	green	Spool width:	7.8 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE11010
Length:	325 m

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D transparent red PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example it is a hydrophobic material that does not absorb water. The red transparent 1.75mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	red	Spool width:	7.8 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE11008
Length:	325 m

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D transparent black PETG filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing of strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example it is a hydrophobic material that does not absorb water. The transparent black 1.75mm PETG is a slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	black	Spool width:	7.8 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE11006
Length:	325 m

£19.40 (sold out) (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

123-3D white PETG Filament 1.75mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example it is a hydrophobic material that does not absorb water. The white 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	220-250 °C	Spool width:	7.8 cm
Amount:	1 kg	Hazard class:	n/a
Length:	325 m	Our item no:	DFE11001

Order now, we can ship this on Monday!

£19.40 (Incl. 20% VAT)
(£16.17 Excl. 20% VAT)

in stock

123-3D white PETG filament 1.75mm, 2.3kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing strong objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties. For example, it is a hydrophobic material that does not absorb water. The white 1.75mm PETG is a slightly flexible filament, and you can easily 3D print without odours.

This is a large spool of 2.3kg.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 30.0 cm
Colour:	white	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	220-250 °C	Spool width:	10.5 cm
Amount:	2.3 kg	Hazard class:	n/a
Length:	750 m	Our item no:	DFE11023

£43.96 (sold out) (Incl. 20% VAT)
(£36.63 Excl. 20% VAT)

123-3D Filament White 1.75 mm PETG 3 kg (Jupiter series)

Zoom in

2
1
0

Description This white PETG filament is ideal for sturdy prints. It is less brittle and easier to print than other PETG filaments. In addition, it has good mechanical properties, such as more elasticity, higher resistance to impact, better adhesion between layers and more resistance to temperature changes than PLA. This filament has a diameter of 1.75 mm and there is 3 kg on the spool.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	65-85 °C	Spool width:	10.0 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	225-245 °C	Our item no:	DFP01119
Amount:	3 kg	Replaces item no:	DFE11023
Brand:	123-3D

Order now, we can ship this on Monday!

£57.34 (Incl. 20% VAT)
(£47.78 Excl. 20% VAT)

in stock

123-3D Filament Black 1.75 mm ASA 1 kg (Jupiter series)

Zoom in

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75 mm and there is 1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Inner diameter:	Ø 5.2 cm
Colour:	black	Spool width:	6.8 cm
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP01108

Order now, we can ship this on Monday!

£29.50 (Incl. 20% VAT)
(£24.58 Excl. 20% VAT)

in stock

123-3D Filament Black 1.75 mm PETG 3 kg (new)

Zoom in

2
1
0

Description This new black PETG filament is ideal for sturdy prints. It is less brittle and easier to print than other PETG filaments. In addition, it has good mechanical properties, such as more elasticity, higher resistance to impact, better adhesion between layers and more resistance to temperature changes than PLA. This filament has a diameter of 1.75 mm and there is 3 kg on the spool.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	65-85 °C	Spool width:	10.0 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	225-245 °C	Our item no:	DFP01124
Amount:	3 kg	Replaces item no:	DFE11022
Brand:	123-3D

Order now, we can ship this on Monday!

£57.34 (Incl. 20% VAT)
(£47.78 Excl. 20% VAT)

in stock

REAL filament blue 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This blue 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02012

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	blue	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02032
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL filament blue 1.75 mm PETG 1 kg

Zoom in

2
1
0

Description The blue PETG filament (1.75 mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water repellent) and has a low shrinkage rate, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	30-60 °C	Spool width:	7.0 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	220-250 °C	Our item no:	DFP02223
Amount:	1 kg	Replaces item no:	DFE02014
Brand:	REAL

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL filament blue 1.75mm PETG 3kg

Zoom in

2
1
0

Description The blue PETG filament (1.75 mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	30-60 °C	Spool width:	10.5 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	220-250 °C	Our item no:	DFP02224
Amount:	3 kg	Replaces item no:	DFE02049
Brand:	REAL

Order now, we can ship this on Monday!

£61.63 (Incl. 20% VAT)
(£51.36 Excl. 20% VAT)

in stock

REAL blue PETG filament 1.75mm, 3kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	blue	Spool width:	10.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFE02049
Length:	1,020 m

This item has been replaced by DFP02224

£61.63 (sold out) (Incl. 20% VAT)
(£51.36 Excl. 20% VAT)

REAL blue PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	blue	Spool width:	8.0 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20143
Length:	330 m

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

REAL fluorescent orange PETG filament 1.75mm, 1kg

Zoom in

Description This fluoresent orange REAL PETG filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp, for example in the disco. The filament has a perfected round shape to prevent jamming. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	fluorescent orange	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02053
Length:	340 m

£22.06 (sold out) (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

REAL filament yellow 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This yellow 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02021

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL yellow PETG filament 1.75mm, 0.5kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02035
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL yellow PETG filament 1.75mm, 1kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	yellow	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02020
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL yellow PETG filament 1.75mm, 3kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	yellow	Spool width:	10.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFE02068
Length:	1,020 m

£59.46 (Incl. 20% VAT)
(£49.55 Excl. 20% VAT)

Backorder - Due January

REAL transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description The yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent yellow	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02008
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL filament gray 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This gray 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02013

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL grey PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20146
Length:	330 m

This product can be ordered 1 time(s).

£24.23 (sold out) (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

REAL Blue Shifting grey-blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The blue shifting grey-blue PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey/blue	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02034
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL grey-blue PETG filament 1.75mm, 1kg

Zoom in

Description This unique grey-blue PETG filament (1.75mm) is ideal for 3D printing of strong objects. Depending on the incidence of light, this filament has a dark grey-blue colour. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey/blue	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02022
Length:	340 m

This product can be ordered 1 time(s).

£22.06 (sold out) (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

REAL filament green 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This green 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02014

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL filament green 1.75 mm PETG 1 kg

Zoom in

2
1
0

Description The green PETG filament (1.75 mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water repellent) and has a low shrinkage rate, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	30-60 °C	Spool width:	7.0 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	220-250 °C	Our item no:	DFP02221
Amount:	1 kg	Replaces item no:	DFE02023
Brand:	REAL

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL green PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	8.0 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20147
Length:	330 m

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

REAL transparent green PETG filament 1.75mm, 1kg

Zoom in

Description The green PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02007
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL filament light green 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This light green 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	light green	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02015

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL brass PETG filament 1.75mm, 1kg

Zoom in

Description The brass coloured PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	brass	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02025
Length:	340 m

£22.06 (sold out) (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

REAL filament neutral 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This neutral 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02016

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL filament orange 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This orange 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02017

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL orange PETG filament 1.75mm, 0.5kg

Zoom in

Description This orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	orange	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02045
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL filament orange 1.75 mm PETG 1 kg

Zoom in

2
1
0

Description This orange PETG filament (1.75 mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	30-60 °C	Spool width:	7.0 cm
Colour:	orange	Hazard class:	n/a
Nozzle temp range:	220-250 °C	Our item no:	DFP02220
Amount:	1 kg	Replaces item no:	DFE02048
Brand:	REAL

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL orange PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal printing temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	RAL colour no:	2010
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	40-80 °C	Outer diameter:	Ø 20.0 cm
Colour:	orange	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	230-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFE20149

This product can be ordered 1 time(s).

£24.23 (sold out) (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

REAL filament red 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This red 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02018

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL red PETG filament 1.75mm, 0.5kg

Zoom in

Description The red PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Length:	170 m	Our item no:	DFE02033

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL red PETG filament 1.75mm, 1kg

Zoom in

Description The red PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	340 m	Our item no:	DFE02015

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL red PETG filament 1.75mm, 3kg

Zoom in

Description The red PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	3020
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 30.0 cm
Colour:	red	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	220-250 °C	Spool width:	10.5 cm
Amount:	3 kg	Hazard class:	n/a
Length:	1,020 m	Our item no:	DFE02050

£61.63 (sold out) (Incl. 20% VAT)
(£51.36 Excl. 20% VAT)

REAL red PETG recycled filament 1.75mm, 1kg

Zoom in

Description This Recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	red	Spool width:	8.0 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20152
Length:	330 m

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

REAL transparent red PETG filament 1.75mm, 1kg

Zoom in

Description This red transparent PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	red	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02002
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL smokey black PETG filament 1.75mm, 1kg

Zoom in

Description This smoky black PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent black	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02026
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL transparent PETG filament 1.75mm, 1kg

Zoom in

Description This transparent PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02000
Length:	340 m

£22.06 (sold out) (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

REAL transparent blue PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent blue PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent blue	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02043
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL transparent blue PETG filament 1.75mm, 1kg

Zoom in

Description The blue PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Using a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent blue	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02001
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL transparent yellow PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent yellow PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent yellow	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02038
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL transparent green PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent green PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent green	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02039
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL transparent orange PETG filament 1.75mm, 0.5kg

Zoom in

Description The transparent orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent orange	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02036
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL transparent orange PETG filament 1.75mm, 1kg

Zoom in

Description This transparent orange PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional. The degree of transparency depends on the structure of the object.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent orange	Spool width:	8.0 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02024
Length:	340 m

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL transparent red PETG filament 1.75mm, 0.5kg

Zoom in

Description This transparent red PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	transparent red	Spool width:	4.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02037
Length:	170 m

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL filament white 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This white 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02019

Order now, we can ship this on Monday!

£37.83 (Incl. 20% VAT)
(£31.53 Excl. 20% VAT)

in stock

REAL white PETG filament 1.75mm, 0.5kg

Zoom in

Description The white PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Length:	170 m	Our item no:	DFE02031

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL white PETG filament 1.75mm, 1kg

Zoom in

Description The white PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	340 m	Our item no:	DFE02013

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL white PETG filament 1.75mm, 3kg

Zoom in

Description The white PETG filament (1.75mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 30.0 cm
Colour:	white	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	220-250 °C	Spool width:	10.5 cm
Amount:	3 kg	Hazard class:	n/a
Length:	1,020 m	Our item no:	DFE02047

£61.63 (sold out) (Incl. 20% VAT)
(£51.36 Excl. 20% VAT)

REAL filament white 1.75 mm PETG 5 kg

Zoom in

Description The white PETG filament (1.75 mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

With this extra large roll you can make even larger prints without having to change your roll halfway through.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	30-60 °C	Spool width:	10.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	220-250 °C	Our item no:	DFP02207
Amount:	5 kg	Replaces item no:	DFE02067
Brand:	REAL

Order now, we can ship this on Monday!

£100.26 (Incl. 20% VAT)
(£83.55 Excl. 20% VAT)

in stock

REAL white PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	white	Spool width:	8.0 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE20155
Length:	330 m

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

REAL white PETG recycled filament 1.75mm, 5kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.1 cm
Colour:	white	Spool width:	10.5 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFE20156
Length:	1,650 m

£111.78 (Incl. 20% VAT)
(£93.15 Excl. 20% VAT)

Backorder - Due January

REAL silver PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	RAL colour no:	9022
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	40-80 °C	Outer diameter:	Ø 20.0 cm
Colour:	silver	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	230-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFE20153

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

REAL filament black 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This black 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02010

Order now, we can ship this on Monday!

£33.79 (Incl. 20% VAT)
(£28.16 Excl. 20% VAT)

in stock

REAL filament black 1.75 mm ASA-CF 1kg

Zoom in

Description ASA-CF filament from REAL has all the benefits of standard ASA with the addition of 10% carbon particles, which provides better reliability and stiffness. It is easy to print, has good bonding between layers and has a beautiful matte appearance. In addition, it is just as water, UV and heat resistant as standard ASA and prints from this material can be used perfectly outdoors. With ASA-CF you get a strong and low-shrink filament that is perfect for prints that must also be able to easily withstand different weather conditions.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	85-115 °C	Spool width:	7.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02022

Order now, we can ship this on Monday!

£50.58 (Incl. 20% VAT)
(£42.15 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 0.5kg

Zoom in

Description This black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02062
Length:	170 m

Order now, we can ship this on Monday!

£29.71 (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 1kg

Zoom in

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	8.0 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02060
Length:	340 m

Order now, we can ship this on Monday!

£51.81 (Incl. 20% VAT)
(£43.18 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 3kg

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP12062
Length:	1,020 m

Order now, we can ship this on Monday!

£109.70 (Incl. 20% VAT)
(£91.42 Excl. 20% VAT)

in stock

REAL black PETG filament 1.75mm, 0.5kg

Zoom in

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Length:	170 m	Our item no:	DFE02030

Order now, we can ship this on Monday!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL black PETG filament 1.75mm, 1kg

Zoom in

Description The black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9017
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	340 m	Our item no:	DFE02012

Order now, we can ship this on Monday!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL black PETG filament 1.75mm, 3kg

Zoom in

2
1
0

Description The black PETG filament (1.75 mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	RAL colour no:	9017
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	30-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP02214
Brand:	REAL	Replaces item no:	DFE02046

Order now, we can ship this on Monday!

£61.63 (Incl. 20% VAT)
(£51.36 Excl. 20% VAT)

in stock

REAL filament black 1.75 mm PETG 5 kg

Zoom in

2
1
0

Description The black PETG filament (1.75 mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

With this extra large roll you can make even larger prints without having to change your roll halfway through.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	30-60 °C	Spool width:	10.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	220-250 °C	Our item no:	DFP02215
Amount:	5 kg	Replaces item no:	DFE02066
Brand:	REAL

Order now, we can ship this on Monday!

£100.26 (Incl. 20% VAT)
(£83.55 Excl. 20% VAT)

in stock

REAL black PETG recycled filament 1.75mm, 1kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	RAL colour no:	9005
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	40-80 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	230-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFE20139

Order now, we can ship this on Monday!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

REAL black PETG recycled filament 1.75mm, 5kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you'll also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFE20140
Length:	1,650 m

Order now, we can ship this on Monday!

£111.78 (Incl. 20% VAT)
(£93.15 Excl. 20% VAT)

in stock

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg

Zoom in

Description This neutral BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100-120 °C	Spool width:	5.2 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	260-280 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00038

Order now, we can ship this on Monday!

£38.02 (Incl. 20% VAT)
(£31.68 Excl. 20% VAT)

in stock

BASF Ultrafuse black ASA filament 1.75mm, 0.75kg

Zoom in

Description This black BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Tunnel code:	n/a	RAL colour no:	9005
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100-120 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	260-280 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00039
Brand:	BASF

Order now, we can ship this on Monday!

£34.94 (Incl. 20% VAT)
(£29.12 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg

Zoom in

Description This black BASF PET CF15 filament (1.75mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very stable and has very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best results we advise you to use one.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00099

Order now, we can ship this on Monday!

£67.74 (Incl. 20% VAT)
(£56.45 Excl. 20% VAT)

in stock

BASF Ultrafuse blue PET filament 1.75mm, 0.75kg

Zoom in

Description The blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00052

Order now, we can ship this on Monday!

£27.44 (Incl. 20% VAT)
(£22.87 Excl. 20% VAT)

in stock

BASF Ultrafuse yellow PET filament 1.75mm, 0.75kg

Zoom in

Description The yellow BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	RAL colour no:	1003
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00053
Brand:	BASF

Order now, we can ship this on Monday!

£24.44 (Incl. 20% VAT)
(£20.37 Excl. 20% VAT)

in stock

BASF Ultrafuse green PET filament 1.75mm, 0.75kg

Zoom in

Description The green BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00055

Order now, we can ship this on Monday!

£21.44 (Incl. 20% VAT)
(£17.87 Excl. 20% VAT)

in stock

BASF Ultrafuse orange PET filament 1.75mm, 0.75kg

Zoom in

Description The orange BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00056

Order now, we can ship this on Monday!

£27.44 (Incl. 20% VAT)
(£22.87 Excl. 20% VAT)

in stock

BASF Ultrafuse red PET filament 1.75mm, 0.75kg

Zoom in

Description The red BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00058

Order now, we can ship this on Monday!

£26.94 (Incl. 20% VAT)
(£22.45 Excl. 20% VAT)

in stock

BASF Ultrafuse transparent PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent BASF PET filament (1.75mm) is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00059

Order now, we can ship this on Monday!

£28.44 (Incl. 20% VAT)
(£23.70 Excl. 20% VAT)

in stock

BASF Ultrafuse transparent PET filament 1.75mm, 2.5kg

Zoom in

Description This neutral BASF PET filament (1.75mm) is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	75-100 °C	Spool width:	10.2 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00066

Order now, we can ship this on Monday!

£69.29 (Incl. 20% VAT)
(£57.74 Excl. 20% VAT)

in stock

BASF Ultrafuse transparent PET filament 1.75mm, 4.5kg

Zoom in

Description This neutral BASF PET filament (1.75mm) is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	75-100 °C	Spool width:	10.0 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00069

Order now, we can ship this on Monday!

£110.62 (Incl. 20% VAT)
(£92.18 Excl. 20% VAT)

in stock

BASF Ultrafuse transparent PET filament 1.75mm, 8.5kg

Zoom in

Description This neutral BASF PET filament (1.75mm) is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	75-100 °C	Spool width:	17.0 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00072

Order now, we can ship this on Monday!

£211.06 (Incl. 20% VAT)
(£175.88 Excl. 20% VAT)

in stock

BASF Ultrafuse transparent blue PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent blue BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	RAL colour no:	5002
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	transparent blue	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00051
Brand:	BASF

Order now, we can ship this on Monday!

£23.92 (Incl. 20% VAT)
(£19.93 Excl. 20% VAT)

in stock

BASF Ultrafuse transparent green PET filament 1.75mm, 0.75kg

Zoom in

Description The transparent green BASF PET filament (1.75mm) is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	RAL colour no:	6018
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	transparent green	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00061
Brand:	BASF

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£26.94 (Incl. 20% VAT)
(£22.45 Excl. 20% VAT)

in stock

BASF Ultrafuse white PET filament 1.75mm, 0.75kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	RAL colour no:	9010
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00064
Brand:	BASF

Order now, we can ship this on Monday!

£17.97 (Incl. 20% VAT)
(£14.98 Excl. 20% VAT)

in stock

BASF Ultrafuse white PET filament 1.75mm, 2.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	75-100 °C	Spool width:	10.2 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00067

Order now, we can ship this on Monday!

£69.29 (Incl. 20% VAT)
(£57.74 Excl. 20% VAT)

in stock

BASF Ultrafuse white PET filament 1.75mm, 4.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	75-100 °C	Spool width:	10.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00070

Order now, we can ship this on Monday!

£110.62 (Incl. 20% VAT)
(£92.18 Excl. 20% VAT)

in stock

BASF Ultrafuse white PET filament 1.75mm, 8.5kg

Zoom in

Description The white BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	75-100 °C	Spool width:	17.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00073

Order now, we can ship this on Monday!

£211.06 (Incl. 20% VAT)
(£175.88 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET filament 1.75mm, 0.75kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	RAL colour no:	9005
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00065
Brand:	BASF

Order now, we can ship this on Monday!

£29.84 (Incl. 20% VAT)
(£24.87 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET filament 1.75mm, 2.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	75-100 °C	Spool width:	10.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00068

Order now, we can ship this on Monday!

£55.46 (Incl. 20% VAT)
(£46.22 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET filament 1.75mm, 4.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing of all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	75-100 °C	Spool width:	10.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00071

Order now, we can ship this on Monday!

£110.62 (Incl. 20% VAT)
(£92.18 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET filament 1.75mm, 8.5kg

Zoom in

Description The black BASF PET filament (1.75mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material features good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET, but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	75-100 °C	Spool width:	17.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00074

Order now, we can ship this on Monday!

£211.06 (Incl. 20% VAT)
(£175.88 Excl. 20% VAT)

in stock

BASF Ultrafuse blue rPET filament 1.75mm, 0.75kg

Zoom in

Description Ultrafuse rPET filament from BSAF is made from recycled materials and is therefore very durable. The filament is just as strong as new filament and has good chemical resistance. The print temperature is between 225°C and 245°C. This blue filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	RPET	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	65-85 °C	Spool width:	5.2 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00200

£37.15 (Incl. 20% VAT)
(£30.96 Excl. 20% VAT)

Backorder - Due January

ColorFabb natural ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in a natural colour has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13000
Length:	250 m

Order now, we can ship this on Monday!

£18.00 (Incl. 20% VAT)
(£15.00 Excl. 20% VAT)

in stock

ColorFabb black ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13001
Length:	90 m

Order now, we can ship this on Monday!

£17.60 (Incl. 20% VAT)
(£14.67 Excl. 20% VAT)

in stock

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type of lightweight ASA filament consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C - 100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13016
Length:	250 m

Order now, we can ship this on Monday!

£23.89 (Incl. 20% VAT)
(£19.91 Excl. 20% VAT)

in stock

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type of lightweight ASA filament consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C - 100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13014
Length:	250 m

Order now, we can ship this on Monday!

£22.50 (Incl. 20% VAT)
(£18.75 Excl. 20% VAT)

in stock

colorFabb dark grey PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This dark grey colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp much slower. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.5 cm
Colour:	dark grey	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13079
Length:	250 m

Order now, we can ship this on Monday!

£22.25 (Incl. 20% VAT)
(£18.54 Excl. 20% VAT)

in stock

colorFabb dark grey PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This dark grey colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	dark grey	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13078
Length:	750 m

Order now, we can ship this on Monday!

£34.80 (Incl. 20% VAT)
(£29.00 Excl. 20% VAT)

in stock

colorFabb light grey PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This light grey colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13082
Length:	750 m

Order now, we can ship this on Monday!

£37.00 (Incl. 20% VAT)
(£30.83 Excl. 20% VAT)

in stock

colorFabb red PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This red colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp much slower. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.5 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13087
Length:	250 m

£22.40 (Incl. 20% VAT)
(£18.67 Excl. 20% VAT)

Backorder - Due January

colorFabb red PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This red colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13086
Length:	750 m

Order now, we can ship this on Monday!

£34.45 (Incl. 20% VAT)
(£28.71 Excl. 20% VAT)

in stock

colorFabb transparent PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.5 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13075
Length:	250 m

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

colorFabb transparent PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This transparent colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13074
Length:	750 m

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£19.20 (Incl. 20% VAT)
(£16.00 Excl. 20% VAT)

in stock

colorFabb white PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This white colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp much slower. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13091
Length:	250 m

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

colorFabb white PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This white colorFabb filament has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13090
Length:	750 m

Order now, we can ship this on Monday!

£37.00 (Incl. 20% VAT)
(£30.83 Excl. 20% VAT)

in stock

colorFabb black PETG economy filament 1.75mm, 0.75kg

Zoom in

Description This colorFabb filament in the colour black has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp much slower. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13071
Length:	250 m

Order now, we can ship this on Monday!

£22.35 (Incl. 20% VAT)
(£18.63 Excl. 20% VAT)

in stock

colorFabb black PETG economy filament 1.75mm, 2.2kg

Zoom in

Description This colorFabb filament in the colour black has a diameter of 1.75mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13070
Length:	750 m

Order now, we can ship this on Monday!

£37.00 (Incl. 20% VAT)
(£30.83 Excl. 20% VAT)

in stock

colorFabb semi-matte black PETG filament 1.75mm, 0.75kg

Zoom in

Description

Print strong objects with this colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matte effect. The filament has a diameter of 1.75mm and a weight of 0.75kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG semi matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60-70 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13195
Length:	250 m

Order now, we can ship this on Monday!

£23.00 (Incl. 20% VAT)
(£19.17 Excl. 20% VAT)

in stock

colorFabb semi-matte black PETG filament 1.75mm, 2.2kg

Zoom in

Description

Print strong objects with this colorFabb PETG filament in the colour black with a semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibers are used to obtain the semi-matte effect. The filament has a diameter of 1.75mm and a weight of 2.2kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG semi matte	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13197
Length:	750 m

£67.05 (Incl. 20% VAT)
(£55.88 Excl. 20% VAT)

Backorder - Due January

eSun blue PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent blue filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20209
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PETG filament 1.75mm Transparent Blue 1kg

Zoom in

Description eSun's transparent blue PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	transparent blue	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20046
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PETG filament 1.75mm Transparent Green 1kg

Zoom in

Description eSun's transparent green PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	transparent green	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20047
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun transparent PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's transparent filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	transparent	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20212
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PETG filament 1.75mm Neutral 1kg

Zoom in

Description eSun's neutral PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20045
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PETG filament 1.75mm Transparent Orange 1kg

Zoom in

Description The transparent orange PETG filament from eSun is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	transparent orange	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20050
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun black PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's black filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20208
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun solid black PETG filament 1,75mm, 1kg

Zoom in

Description The eSun solid black PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	solid black	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20044
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun grey PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is a high-quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20210
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun solid red PETG filament 1.75mm, 1kg

Zoom in

Description The eSun solid red PETG filament (1.75mm) is ideal for 3D printing of strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	even red	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20043
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun white PETG Refill filament 1.75mm, 1kg

Zoom in

Description With the PETG Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's white filament is a high quality material with high tenacity, chemical resistance and water resistance. This PETG material has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20216
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun white PETG filament 1.75mm, 1kg

Zoom in

1
0

Description eSun's white PETG filament is a high-quality material with high tenacity, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20051
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 21% VAT)
(£13.47 Excl. 21% VAT)

in stock

eSun transparent yellow PETG filament 1.75mm, 1kg

Zoom in

Description eSun's transparent yellow PETG filament is a high-quality material with high toughness, chemical resistance and water resistance. This filament has a translucent and smooth surface. You print the material without a temperature chamber. This eSun PETG filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	transparent yellow	Hazard class:	n/a
Nozzle temp range:	230-250 °C	Our item no:	DFE20048
Amount:	1 kg

Order now, we can ship this on Monday!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240°C to 260°C. For best results, use a heated bed of 75°C to 95°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14054

Order now, we can ship this on Monday!

£29.96 (Incl. 20% VAT)
(£24.97 Excl. 20% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14180

Order now, we can ship this on Monday!

£82.97 (Incl. 20% VAT)
(£69.14 Excl. 20% VAT)

in stock

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Zoom in

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14181

Order now, we can ship this on Monday!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14183

Order now, we can ship this on Monday!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14185

Order now, we can ship this on Monday!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite natural ASA filament 1.75mm, 3kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14186

£82.98 (Incl. 20% VAT)
(£69.15 Excl. 20% VAT)

Backorder - Due January

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Zoom in

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14189

Order now, we can ship this on Monday!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240°C to 260°C. For best results, use a heated bed of 75°C to 95°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14056

Order now, we can ship this on Monday!

£25.94 (Incl. 20% VAT)
(£21.62 Excl. 20% VAT)

in stock

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14190

Order now, we can ship this on Monday!

£82.95 (Incl. 20% VAT)
(£69.13 Excl. 20% VAT)

in stock

Polymaker PolyLite black PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a black colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14194

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite PETG filament 1.75 mm Black 5 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75 mm and a black color. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.2 cm
Heated bed temp:	70-80 °C	Spool width:	16.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFP14299

Order now, we can ship this on Monday!

£128.98 (Incl. 20% VAT)
(£107.48 Excl. 20% VAT)

in stock

Polymaker PolyLite blue PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright blue colour. PETG is a hydrophobic material (water repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14196

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite PETG filament 1.75 mm Dark Blue 1 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75 mm and a dark blue color. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	dark blue	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14294

Order now, we can ship this on Monday!

£24.80 (Incl. 20% VAT)
(£20.67 Excl. 20% VAT)

in stock

Polymaker PolyLite green PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright green colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14198

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a grey colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14201

Order now, we can ship this on Monday!

£24.80 (Incl. 20% VAT)
(£20.67 Excl. 20% VAT)

in stock

Polymaker PolyLite orange PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright orange colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14202

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite purple PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a purple colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	purple	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14205

Order now, we can ship this on Monday!

£22.99 (Incl. 20% VAT)
(£19.16 Excl. 20% VAT)

in stock

Polymaker PolyLite red PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright red colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14206

Order now, we can ship this on Monday!

£22.79 (Incl. 20% VAT)
(£18.99 Excl. 20% VAT)

in stock

Polymaker PolyLite turquoise PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear turquoise colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	turquoise	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14208

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite transparent PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a clear transparent appearance. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14210

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite white PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright white colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage rate, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14212

Order now, we can ship this on Monday!

£25.29 (Incl. 20% VAT)
(£21.08 Excl. 20% VAT)

in stock

Polymaker PolyLite yellow PETG filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 1.75mm and a bright yellow colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14214

Order now, we can ship this on Monday!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyMax black PETG filament 1.75mm, 0.75kg

Zoom in

Description This Polymaker PolyMax filament in the colour black has a diameter of 1.75mm and is ideal for 3D printing strong objects. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality than ordinary PETG.

PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp much slower. The ideal printing temperature is 230°C to 240°C. For best results, use a heated bed of 70°C to 80°C.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	4.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14094

Order now, we can ship this on Monday!

£39.49 (Incl. 20% VAT)
(£32.91 Excl. 20% VAT)

in stock

Polymaker PolyMax white PETG filament 1.75mm, 0.75kg

Zoom in

Description This Polymaker PolyMax filament in white has a diameter of 1.75mm and is ideal for 3D printing strong objects. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality than ordinary PETG.

PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. The ideal printing temperature is 230°C to 240°C. For best results, use a heated bed of 70°C to 80°C.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	4.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14096

Order now, we can ship this on Monday!

£28.18 (Incl. 20% VAT)
(£23.48 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PETG-ESD filament 1.75 mm Black 0.5 kg

Zoom in

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make the ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you would like to make a very strong print with high layer adhesion, it is advisable to switch off the fan when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn on the fan. For an ideal middle ground, it is best to run the fan at 20%.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG ESD	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	250-290 °C	Our item no:	DFP14300
Amount:	0.5 kg

Order now, we can ship this on Monday!

£39.00 (Incl. 20% VAT)
(£32.50 Excl. 20% VAT)

in stock

XYZprinting clear blue PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the clear blue PETG filament from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The blue PETG filament is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Brand:	XYZprinting
Material:	PETG	Outer diameter:	Ø 16.8 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	40-65 °C	Spool width:	5.4 cm
Colour:	bright blue	Hazard class:	n/a
Nozzle temp range:	215-230 °C	Our item no:	DFP05048
Amount:	0.6 kg

This product can be ordered 1 time(s).

This product is end of life.

XYZprinting bright red PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the bright red PETG filament from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The red PETG filament is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here .

Specifications

Material:	PETG	Brand:	XYZprinting
Filament diameter:	1.75 mm	Outer diameter:	Ø 16.8 cm
Heated bed temp:	40-65 °C	Inner diameter:	Ø 5.0 cm
Colour:	bright red	Spool width:	5.4 cm
Nozzle temp range:	215-230 °C	Our item no:	DFP05051
Amount:	0.6 kg

This product is end of life.

XYZprinting 1.75 mm filament PETG natural 0.6 kg (NFC coil)

Zoom in

Description With the PETG filament natural from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The PETG filament in the color natural is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75 mm.

Read more about printing with PETG filament here .

Specifications

Material:	PETG	Brand:	XYZprinting
Filament diameter:	1.75 mm	Outer diameter:	Ø 16.8 cm
Heated bed temp:	40-65 °C	Inner diameter:	Ø 5.0 cm
Colour:	neutral	Spool width:	5.4 cm
Nozzle temp range:	215-230 °C	Our item no:	DFP05050
Amount:	0.6 kg

This product is end of life.

XYZprinting tangerine PETG filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With the PETG filament tangerine from XYZprinting you can easily create strong objects. PETG is water-repellent and has a low shrinkage content. This allows you to print strong designs that warp less quickly. The PETG filament is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful, shiny look. Use of a heated bed is optional. The filament has a diameter of 1.75mm.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Brand:	XYZprinting
Material:	PETG	Outer diameter:	Ø 16.8 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	40-65 °C	Spool width:	5.4 cm
Colour:	orange	Hazard class:	n/a
Nozzle temp range:	215-230 °C	Our item no:	DFP05049
Amount:	0.6 kg

This product can be ordered 1 time(s).

£24.13 (sold out) (Incl. 20% VAT)
(£20.11 Excl. 20% VAT)

Zortrax graphite Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this graphite Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	graphite	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00111
Amount:	0.8 kg

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

Zortrax graphite Z-ASA Pro filament 1.75mm, 2kg

Zoom in

Description Create durable prints with this graphite Zortrax Z-ASA Pro filament. The material is resistant to weather influences and UV light. This makes this filament perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 2000g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-90 °C	Spool width:	7.4 cm
Colour:	graphite	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00110
Amount:	2 kg

This product is end of life.

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	pure white	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00115
Amount:	0.8 kg

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

Zortrax pure white Z-ASA Pro filament 1.75mm, 2kg

Zoom in

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather influences and UV light. This makes this filament perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to the print bed. The white filament has a diameter of 1.75mm and a weight of 2000g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-90 °C	Spool width:	7.4 cm
Colour:	pure white	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00114
Amount:	2 kg

This product is end of life.

Zortrax pure black Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	pure black	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00113
Amount:	0.8 kg

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

Zortrax pure black Z-ASA Pro filament 1.75mm, 2kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 2000g.

Specifications

Material:	Z ASA Pro	Brand:	Zortrax
Filament diameter:	1.75 mm	Outer diameter:	Ø 28.0 cm
Heated bed temp:	70-90 °C	Inner diameter:	Ø 5.5 cm
Colour:	pure black	Spool width:	7.4 cm
Nozzle temp range:	255-265 °C	Our item no:	DFP00112
Amount:	2 kg

This product is end of life.

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this on Monday!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this on Monday!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this on Monday!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this on Monday!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this on Monday!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this on Monday!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

Order now, we can ship this on Monday!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this on Monday!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this on Monday!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this on Monday!

£43.95 (Incl. 20% VAT)
(£36.63 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

£32.50 (sold out) (Incl. 20% VAT)
(£27.08 Excl. 20% VAT)

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this on Monday!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

Backorder - Due January

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

Order now, we can ship this on Monday!

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

in stock

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this on Monday!

£105.00 (Incl. 20% VAT)
(£87.50 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

Backorder - Due January

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

View all water resistant filaments

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

View all water resistant filaments