Black 2.85mm PETG 2.85mm filament Diameter 3D filament 2.85mm 123-3D carbon PETG filament 2.85mm, 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D carbon PETG filament 2.85mm, 0.5kg

Description The carbon PETG filament contains 20% carbon particles. This gives 3D printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is more resistant to heat, stiffer and more impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	5.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE08001
Length:	64 m

Order now, we can ship this tomorrow!

£24.23 5% discount:

£23.02 (Incl. 20% VAT)
(£19.18 Excl. 20% VAT)

in stock

123-3D transparent black PETG filament 2.85mm, 1kg

Zoom in

Description PETG filament from 123-3d.co.uk is the ideal filament for 3D printing of big, clear objects. PETG combines the advantages of ABS and PLA in one filament: it is both strong and easy to use. In addition, PETG has unique properties, for example, it is a hydrophobic material that does not absorb water. The transparent black 2.85mm PETG is a clear, slightly flexible filament with which you can easily 3D print without odours.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	black	Spool width:	7.8 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE11017
Length:	128 m

£19.40 10% discount:

£17.46 (Incl. 20% VAT)
(£14.55 Excl. 20% VAT)

14 day delivery

123-3D Filament Black 2.85 mm PETG 2.3 kg

Zoom in

2
1
0

Description This black PETG filament is ideal for sturdy prints. It is less brittle and easier to print than other PETG filaments. In addition, it has good mechanical properties, such as more elasticity, higher resistance to impact, better adhesion between layers and more resistance to temperature changes than PLA. This filament has a diameter of 2.85 mm and there is 2.3 kg on the spool.

Read more about printing with PETG filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PETG	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	65-85 °C	Spool width:	10.0 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	225-245 °C	Our item no:	DFP01126
Amount:	2.3 kg	Replaces item no:	DFE11026
Brand:	123-3D

Order now, we can ship this tomorrow!

£43.96 10% discount:

£39.56 (Incl. 20% VAT)
(£32.97 Excl. 20% VAT)

in stock

REAL black PETG filament 2.85mm, 1kg

Zoom in

Description The black PETG filament (2.85mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9017
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	220-250 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	128 m	Our item no:	DFE02016

Order now, we can ship this tomorrow!

£22.06 10% discount:

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

REAL black PETG filament 2.85mm, 5kg

Zoom in

Description The black PETG filament (2.85mm) is ideal for 3D printing strong objects. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a beautiful shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG	RAL colour no:	9017
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	30-60 °C	Outer diameter:	Ø 35.0 cm
Colour:	black	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	220-250 °C	Spool width:	10.5 cm
Amount:	5 kg	Hazard class:	n/a
Length:	640 m	Our item no:	DFE02064

£100.26 (sold out) (Incl. 20% VAT)
(£83.55 Excl. 20% VAT)

REAL black PETG recycled filament 2.85mm, 5kg

Zoom in

Description This recycled PETG filament, also called PIPG, combines the advantages of PLA and ABS filament and ensures less residual waste.

PIPG filament is virtually odourless, comparable in strength to ABS (one of the strongest filament types) and just as flexible as PLA. The filament has a diameter of 2.85mm and an ideal print temperature of 210°C. In addition, the filament shrinks minimally and with this ultra-strong filament you will also have virtually no problems with warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG recycled	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	40-80 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFE20142
Length:	600 m

£111.78 20% discount:

£89.42 (Incl. 20% VAT)
(£74.52 Excl. 20% VAT)

14 day delivery

REAL black PC-PETG filament 2.85mm, 0.5kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02063
Length:	75 m

Order now, we can ship this tomorrow!

£29.71 10% discount:

£26.74 (Incl. 20% VAT)
(£22.28 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 2.85mm, 1kg

Zoom in

Description The black PC-PETG (2.85mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a matte and modern appearance.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	8.0 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02061
Length:	150 m

Order now, we can ship this tomorrow!

£51.81 10% discount:

£46.63 (Incl. 20% VAT)
(£38.86 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET CF15 filament 2.85mm, 0.75kg

Zoom in

Description The black BASF PET CF15 filament (2.85mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very dimensionally stable and has very low moisture absorption. This filament contains 15% carbon fibres. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET but for the best result we advise you to use one.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00100

£65.05 (Incl. 20% VAT)
(£54.21 Excl. 20% VAT)

14 day delivery

BASF Ultrafuse black PET filament 2.85mm, 0.75kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET but for the best results we advise you to use one.

Specifications

Tunnel code:	n/a	RAL colour no:	9005
Material:	PET	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-100 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00089
Brand:	BASF

Order now, we can ship this tomorrow!

£31.64 (Incl. 20% VAT)
(£26.37 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET filament 2.85mm, 2.5kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET but for the best results we advise you to use one.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	75-100 °C	Spool width:	10.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00092

£69.29 (Incl. 20% VAT)
(£57.74 Excl. 20% VAT)

14 day delivery

BASF Ultrafuse black PET filament 2.85mm, 4.5kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 35.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	75-100 °C	Spool width:	10.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00095

£110.62 (Incl. 20% VAT)
(£92.18 Excl. 20% VAT)

14 day delivery

BASF Ultrafuse black PET filament 2.85mm, 8.5kg

Zoom in

Description The black BASF PET filament (2.85mm) has a deep colour and is suitable for 3D printing all kinds of objects. PET is one of the most widely used plastics in the world. This very reliable material stands for good adhesion. With PET filament you can print just as easily as with PLA, but PET is a lot stronger.

PET is 100% recyclable and suitable for foodstuffs. For example, most plastic bottles are made of PET. With this filament you can make 3D prints in high resolution. No heated bed is required for printing with PET but for the best results we advise you to use it.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET	Outer diameter:	Ø 37.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	75-100 °C	Spool width:	17.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00098

£211.06 (Incl. 20% VAT)
(£175.88 Excl. 20% VAT)

14 day delivery

colorFabb black PETG economy filament 2.85mm, 0.75kg

Zoom in

Description This colorFabb filament in black has a diameter of 2.85mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13073
Length:	90 m

£22.40 (Incl. 20% VAT)
(£18.67 Excl. 20% VAT)

14 day delivery

colorFabb black PETG economy filament 2.85mm, 2.2kg

Zoom in

Description This colorFabb filament in black has a diameter of 2.85mm and is ideal for 3D printing strong objects. PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that warp less quickly. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13072
Length:	270 m

This product is end of life.

colorFabb semi-matte black PETG filament 2.85mm, 0.75kg

Zoom in

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibres are used to obtain the semi-matt effect. The filament has a diameter of 2.85mm and a weight of 2.2kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG semi matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60-70 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13196
Length:	90 m

£23.74 (Incl. 20% VAT)
(£19.78 Excl. 20% VAT)

14 day delivery

colorFabb semi-matte black PETG filament 2.85mm, 2.2kg

Zoom in

Description

Print strong objects with colorFabb PETG filament in the colour black with semi-matte effect. The matte black colour provides a luxurious finish to prints. PETG is a hydrophobic substance (water-repellent) and has a low shrinkage content, which significantly improves the printing process. In addition, PETG is easy to print and no fibres are used to obtain the semi-matte effect. The filament has a diameter of 2.85mm and a weight of 2.2kg. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PETG semi matte	Outer diameter:	Ø 30.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13198
Length:	270 m

£67.05 (Incl. 20% VAT)
(£55.88 Excl. 20% VAT)

14 day delivery

Polymaker PolyLite black PETG filament 2.85mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PETG filament with a diameter of 2.85mm and a black colour. PETG is a hydrophobic fabric (water repellent) and has a low shrinkage content, which greatly improves printing. PETG is recyclable, can print objects in any shape, has very strong mechanical properties and a nice shiny look. Use of a heated bed is optional.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14195

Order now, we can ship this tomorrow!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyMax black PETG filament 2.85mm, 0.75kg

Zoom in

Description This Polymaker PolyMax filament in black has a diameter of 2.85mm and is ideal for 3D printing strong objects. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality than ordinary PETG.

PETG is recyclable, water-repellent and has a low shrinkage content. With this PETG filament you can create objects in all kinds of shapes, with strong mechanical properties and a beautiful shiny look. The result is strong designs that are less likely to warp. The ideal printing temperature is 230°C to 240°C. For best results, use a heated bed of 70°C to 80°C.

Read more about printing with PETG filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	4.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14095

This product is end of life.

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Black

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Black