2.85mm PLA fluorine (UV lamp) PLA 123-3D fluorescent orange PLA filament 2.85mm, 1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D fluorescent orange PLA filament 2.85mm, 1kg

Description The fluorescent orange 2.85mm PLA filament from 123-3d.co.uk makes 3D printing at low temperatures easy. This PLA filament is stronger and less brittle compared to standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.2 cm
Colour:	fluorescent orange	Spool width:	7.8 cm
Nozzle temp range:	195-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP11051
Length:	125 m

£15.80 (sold out) (Incl. 20% VAT)
(£13.17 Excl. 20% VAT)

123-3D fluorescent green PLA filament 2.85mm, 1kg

Zoom in

Description The fluorescent green 2.85mm PLA filament from 123-3d.co.uk makes 3D printing at low temperatures easy. This PLA filament is stronger and less brittle compared to standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odours during 3D printing. A heated bed is not necessary

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.2 cm
Colour:	fluorescent green	Spool width:	7.8 cm
Nozzle temp range:	195-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP11052
Length:	125 m

Order now, we can ship this today!

£16.79 (Incl. 20% VAT)
(£13.99 Excl. 20% VAT)

in stock

REAL fluorescent yellow PLA filament 2.85mm, 1kg

Zoom in

Description This fluorescent yellow REAL PLA filament (2.85mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	fluorescent yellow	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02035
Length:	125 m

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

14 day delivery

REAL fluorescent green PLA filament 2.85mm, 1kg

Zoom in

Description The fluorescent green REAL PLA filament (2.85mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	fluorescent green	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02037
Length:	125 m

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

123-3D PLA pellets, 1kg

Zoom in

Description PLA pellets can be used by enthusiastic DIY'ers to make PLA filament themselves. The pellets can also be used with a direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	Hazard class:	n/a
Colour:	neutral	Our item no:	DPL00000
Amount:	1 kg

Order now, we can ship this today!

£10.18 (Incl. 20% VAT)
(£8.48 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this today!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this today!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

2.85mm PLA fluorine (UV lamp)

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

2.85mm PLA fluorine (UV lamp)