1.75mm PETG carbon Specialist PETG 1.75mm PETG 123-3D carbon PETG filament 1.75mm, 0.5kg carbon 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Home
PETG
1.75mm PETG
Specialist PETG
1.75mm PETG carbon

123-3D carbon PETG filament 1.75mm, 0.5kg

123-3D carbon PETG filament 1.75mm, 0.5kg DFE08000

Description The carbon PETG filament contains 20% carbon particles. This gives 3D-printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is stiffer and more heat and impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	5.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE08000
Length:	170 m

£25.08 (sold out) (Incl. 20% VAT)
(£20.90 Excl. 20% VAT)

REAL black PC-PETG filament 1.75mm, 0.5kg

REAL black PC-PETG filament 1.75mm, 0.5kg DFE02062

Description This black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02062
Length:	170 m

Order now, we can ship this on Monday!

£29.71 (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 1kg

REAL black PC-PETG filament 1.75mm, 1kg DFE02060

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	8.0 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02060
Length:	340 m

Order now, we can ship this on Monday!

£51.81 (Incl. 20% VAT)
(£43.18 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 3kg

REAL black PC-PETG filament 1.75mm, 3kg DFP12062

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP12062
Length:	1,020 m

Order now, we can ship this on Monday!

£109.70 (Incl. 20% VAT)
(£91.42 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg PCF-0350a075 DFB00099

Description This black BASF PET CF15 filament (1.75mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very stable and has very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best results we advise you to use one.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00099

Order now, we can ship this on Monday!

£67.74 (Incl. 20% VAT)
(£56.45 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.40mm

E3D V6 hardened steel nozzle, 1.75mm x 0.40mm V6-NOZZLE-HS-175-400 DED00104

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00104
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

E3D V6 hardened steel nozzle, 1.75mm x 0.50mm

E3D V6 hardened steel nozzle, 1.75mm x 0.50mm V6-NOZZLE-HS-175-500 DED00105

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.5mm (marking #6) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.5 mm	Our item no:	DED00105
Screwthread type:	M6

Order now, we can ship this on Monday!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm V6-NOZZLE-HS-175-800 DED00058

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00058
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

Hygrometer round

123-3D Hygrometer round DRW00020

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

*The hygrometer is delivered without battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	black	Our item no:	DRW00020
Brand:	123-3D

Order now, we can ship this on Monday!

£7.40 (Incl. 20% VAT)
(£6.17 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PETG-ESD filament 1.75 mm Black 0.5 kg

Polymaker PolyMax Tough PETG-ESD filament 1.75 mm Black 0.5 kg PB03001 DFP14300

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make the ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you would like to make a very strong print with high layer adhesion, it is advisable to switch off the fan when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn on the fan. For an ideal middle ground, it is best to run the fan at 20%.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG ESD	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	250-290 °C	Our item no:	DFP14300
Amount:	0.5 kg

Order now, we can ship this on Monday!

£39.00 (Incl. 20% VAT)
(£32.50 Excl. 20% VAT)

in stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

REAL neutral PVA Plus filament 1.75mm, 0.5kg DFV02002

Description This neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Plus	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02002
Length:	170 m

Order now, we can ship this on Monday!

£40.76 (Incl. 20% VAT)
(£33.97 Excl. 20% VAT)

in stock

Transparent acrylic filament coil holder kit

123-3D Transparent acrylic filament coil holder kit DFR00002

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this on Monday!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

123-3D Black acrylic filament coil holder kit DFR00003

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this on Monday!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this on Monday!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

123-3D PETG Pellets 1 kg

123-3D PETG Pellets 1 kg DPL00002

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1 kg of undried pellets, to which no dyes have yet been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00002

Order now, we can ship this on Monday!

£8.50 (Incl. 20% VAT)
(£7.08 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this on Monday!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml MO2016 DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this on Monday!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml MO2018 DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this on Monday!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

3DGloop PETG glue, 75ml

3DGloop PETG glue, 75ml GLP01PET0075BT DSC00011

Description The 75ml PETG glue from 3DGloop has been specially developed for attaching 3D printed material. This very high quality American glue is extremely suitable for PETG filament. Although this glue is specially intended for attaching 3D prints, you can also fix your object inseparably to a glass plate or mirror. For the strongest and most reliable filament adhesion, choose 3DGloop.

Specifications

Brand:	3D Gloop	Safety datasheet:	Safety Information
Volume:	60	Our item no:	DSC00011

This product is end of life.

© 2024 - 123-3d.co.uk