3D Printers, Filament & Tools | Best prices UK

Quantity	Product
No products
Total: £0.00

E3D V6 complete hotend kit 1.75mm, 12V DED00022

Description This complete V6 hotend kit for your RepRap 3D printer contains all the parts for the V6 hotend (1.75mm), which allows printing at higher temperatures. The hotend kit comes with a thermocouple, capable of reaching temperatures of up to 400°C (additional electronics may be required to support this).

The kit contains the following parts:

E3D aluminium heater block
E3D heatbreak
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
Axial fan 30 x 30 x 10mm 12V
Thermocouple type K
Ceramic heating cartridge 12V
E3D aluminium heat sink
PTFE tube, 10cm
Fasteners

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	400 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00022
Nozzle diameter:	0.4 mm

Order directly

External thermocouple board v1.2 - £10.95

£75.50 (sold out) (Incl. 20% VAT)
(£62.92 Excl. 20% VAT)

E3D V6 universal hotend 1.75mm (only metal parts)

Zoom in

Description This kit contains only the metal hotend parts and is intended for users with some experience and/or in possession of their own parts. Electronic components and the PTFE tube are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hotend. The heatsink has an integrated Bowden coupling.

The kit contains the following components:

E3D V6 aluminium heatsink 1.75mm
E3D V6 aluminium heater block
E3D V6 heatbreak 1.75mm
E3D V6 brass nozzle 1.75mm x 0.4mm
E3D V6 spare fasteners

This kit can be used in both a Bowden and a direct drive setup.

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	400 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00024
Nozzle diameter:	0.4 mm

Order now, we can ship this on Monday!

£38.95 (Incl. 20% VAT)
(£32.46 Excl. 20% VAT)

in stock

E3D V6 direct hotend, 3mm

Zoom in

Description This kit contains only the metal hotend parts and is intended for users with some experience and/or in possession of their own parts. Electronics components are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hotend.

The kit contains the following parts:

E3D V6 aluminium heatsink 3.00mm
E3D V6 aluminium heater block
E3D V6 heatbreak 3mm
E3D V6 brass nozzle 3mm x 0.4mm
E3D V6 spare fasteners

Specifications

Tunnel code:	n/a	Brand:	E3D
Filament diameter:	3 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00026

£40.95 (Incl. 20% VAT)
(£34.13 Excl. 20% VAT)

14 day delivery

E3D V6 stainless steel nozzle, 2.85mm x 0.25mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of stainless steel (AISI 303). Stainless steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle runs the risk of corrosion. The stainless steel nozzle provides the same performance as the brass version, but gives a slightly lower print speed.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	RVS	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	0.25 mm	Our item no:	DED00030
Screwthread type:	M6

Order now, we can ship this on Monday!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 stainless steel nozzle, 2.85mm x 0.40mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of stainless steel (AISI 303). Stainless steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle runs the risk of corrosion. The stainless steel nozzle provides the same performance as the brass version, but gives a slightly lower print speed.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 3mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	RVS	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00031
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

E3D V6 stainless steel nozzle, 2.85mm x 0.80mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of stainless steel (AISI 303). Stainless steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle runs the risk of corrosion. The stainless steel nozzle provides the same performance as the brass version, but gives a slightly lower print speed.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 3mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	RVS	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00032
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

E3D Volcano brass nozzle, 1.75mm x 0.60mm

Zoom in

Description This brass E3D Volcano nozzle has an opening of 0.6mm and is ideal for printing tall layers with 1.75mm filament. The high-quality nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DED00033
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 1.75mm x 0.8mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.8mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00034
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 1.75mm x 1mm

Zoom in

Description This E3D volcano nozzle has an opening of 1mm and is ideal for printing tall layers with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1 mm	Our item no:	DED00035
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 1.75mm x 1.2mm

Zoom in

Description This E3D volcano nozzle has an opening of 1.2mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1.2 mm	Our item no:	DED00036
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 2.85mm x 0.8mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.8mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00038
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 2.85mm x 1mm

Zoom in

Description This E3D volcano nozzle has a 1mm opening, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	1 mm	Our item no:	DED00039
Screwthread type:	M6

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

14 day delivery

E3D brass Volcano nozzle, 2.85mm x 1.2mm

Zoom in

Description This E3D volcano nozzle has an opening of 1.2mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	1.2 mm	Our item no:	DED00040
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D V6 Lite6 direct hotend kit, 1.75mm

Zoom in

Description The E3D lite hotend is the ideal hotend for standard 3D printing applications with PLA and ABS filament. The Lite6 is the little brother of the V6 and suitable for standard materials. Unlike the V6, Lite6's PTFE tube runs all the way through, so that it can easily be replaced in the event of a defect or jam.

Below are the main specs of the Lite6:

Print speed of 20-50mm/s;
Easy to use;
Suitable for filament with a diameter of 1.75mm;
Compatible with V6 nozzles, Volcano and Bowden systems;
Maximum temperature 245°C (PLA & ABS).

The kit consists of the following original parts:

E3D Heatsink with Bowden coupling (original)
E3D Aluminium heater block (original)
E3D Brass nozzle (0.4mm) (original)
E3D Thermistor cartridge 100k Ohm Semitec (original)
E3D Injection molded fan duct (colour: red)
E3D Fasteners (original)
E3D Silicone sock for V6 hotends (original)
Ceramic heating element 12V/30W (original)
Axial fan 30 x 30 x 10mm 12V
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting: #TEMP_SENSOR_N 5

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	245 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00045

£47.95 (Incl. 20% VAT)
(£39.96 Excl. 20% VAT)

14 day delivery

E3D embedded bowden clutch

Zoom in

Description This coupling makes it possible to make a Bowden coupling in a simple and effective way. The coupling is compatible with E3D v6 1.75mm hotends and accepts PTFE tubing with an outer diameter of 4mm. The Bowden coupling can also be mounted in, for example, aluminium or printed objects. A hole with a diameter of 8mm and 6mm deep is suitable for mounting the brass coupling.

Specifications

Tunnel code:	n/a	Depth:	6 mm
Diameter:	8 mm	Brand:	E3D
Material:	brass	Hazard class:	n/a
Inner diameter:	4 mm	Our item no:	DED00046

Order now, we can ship this on Monday!

£2.60 (Incl. 20% VAT)
(£2.17 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 1.75mm x 0.4mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.4mm and is ideal for printing large layer heights with 1.75mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00047
Screwthread type:	M6

Order now, we can ship this on Monday!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

E3D brass Volcano nozzle, 2.8mm x 0.4mm

Zoom in

Description This E3D volcano nozzle has an opening of 0.4mm, ideal for printing larger layers with 3mm filament. The high-quality brass nozzle achieves very high throughput and printing speeds, thanks to the large melting zone and the perfectly shaped tip. Volcano nozzles are suitable for use in combination with the Volcano heater block.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	brass	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00048
Screwthread type:	M6

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

14 day delivery

E3D V6 Bowden coupling, 1.75mm

Zoom in

Description This high-quality pneumatic push fit coupling can be mounted directly on an E3D bowden heatsink. The coupling can also be used for other components where a PTFE (Teflon) tube is desired. The coupling has a 1/8" thread and is fully drilled out, allowing a PTFE (Teflon) tube to run through in its entirety.

Suitable for PTFE (Teflon) pipe with an outer diameter of 4mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Screw thread length:	8 mm	Hazard class:	n/a
Thread size:	-	Our item no:	DED00050

Order now, we can ship this on Monday!

£2.20 (Incl. 20% VAT)
(£1.83 Excl. 20% VAT)

in stock

E3D nozzle wrench, 7mm

Zoom in

Description Use this wrench to carefully attach your E3D nozzle.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DED00053
Brand:	E3D

Order now, we can ship this on Monday!

£2.20 (Incl. 20% VAT)
(£1.83 Excl. 20% VAT)

in stock

E3D semitec thermistor incl. sleeving 100k Ohm

Zoom in

Description This 100k thermistor is supplied with fiberglass insulation.

For the Marlin firmware you need the following setting:

#TEMP_SENSOR_N 5

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Max temp:	300 °C	Our item no:	DED00054
Brand:	E3D

Order now, we can ship this on Monday!

£5.75 (Incl. 20% VAT)
(£4.79 Excl. 20% VAT)

in stock

E3D embedded bowden coupling, 3mm

Zoom in

Description This coupling makes it possible to create a Bowden coupling in a simple and effective way. It is compatible with E3D v6 3mm Bowden hotends and accepts 6mm OD PTFE tubing. The Bowden coupling can also be mounted on aluminium or printed objects. The brass coupling can be mounted in a hole with a diameter of 13mm and a depth of 5mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Outer diameter:	13 mm	Hazard class:	n/a
Inner diameter:	6 mm	Our item no:	DED00056
Depth:	5 mm

£3.10 (sold out) (Incl. 20% VAT)
(£2.58 Excl. 20% VAT)

E3D v6 nozzle hardened steel, 1.75mm x 0.25 mm

Zoom in

Description The replacement v6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard (brass) nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25 mm (marking #0) and is suitable for filament with a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.25 mm	Our item no:	DED00057
Screwthread type:	M6

Order now, we can ship this on Monday!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00058
Screwthread type:	M6

Order now, we can ship this on Monday!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 2.85mm x 0.25mm

Zoom in

Description The replacement v6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.25mm (marking #0) and is suitable for filament with a diameter of 3mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	2.85 mm	Hazard class:	n/a
Nozzle diameter:	0.25 mm	Our item no:	DED00059
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

E3D

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

E3D