2.85mm PC ABS REAL white PC-ABS filament 2.85mm, 1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

REAL white PC-ABS filament 2.85mm, 1kg DFA02060

Description The white PC-ABS (polycarbonate-ABS) (2.85mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PC ABS	RAL colour no:	9003
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	95-105 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	260-280 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	150 m	Our item no:	DFA02060

£46.71 (Incl. 20% VAT)
(£38.93 Excl. 20% VAT)

14 day delivery

REAL black PC-ABS filament 2.85mm, 1kg

Zoom in

Description The black PC-ABS (polycarbonate-ABS) (2.85mm) is an incredibly strong material for 3D printing. The filament is based on ABS and contains the right amount of polycarbonate particles for pleasant printing. Prints with PC-ABS have very good layer adhesion and a subtle sheen. This material is very suitable for mechanical parts, which must be light, strong and wear-resistant.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PC ABS	RAL colour no:	9017
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	95-105 °C	Outer diameter:	Ø 20.0 cm
Colour:	black	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	260-280 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	150 m	Our item no:	DFA02058

£46.71 (Incl. 20% VAT)
(£38.93 Excl. 20% VAT)

14 day delivery

REAL neutral PVA Pro filament 2.85mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (2.85mm) for ABS. This material is suitable for printing temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Pro	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02005
Length:	60 m

£40.76 (Incl. 20% VAT)
(£33.97 Excl. 20% VAT)

14 day delivery

Magigoo Pro 3D glue stick for PC filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00208
Volume:	50

Order now, we can ship this today!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament

Zoom in

Description This kit contains four Magigoo 3D glue sticks. The Magigoo 3D Pro glue stick kit is suitable for printing with ABS, PA, PC and PP filament. The sticks ensure perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, you can simply remove it. The glue sticks are easy to use and prevent the warping of prints.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Magigoo	Our item no:	DCP00211
Type:	glue stick

£69.95 (Incl. 20% VAT)
(£58.29 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

14 day delivery

123-3D ABS pellets, 1kg

Zoom in

Description ABS pellets can be used by enthusiastic DIY'ers to make ABS filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00001

£15.85 (Incl. 20% VAT)
(£13.21 Excl. 20% VAT)

14 day delivery

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this today!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this today!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

2.85mm PC ABS

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

2.85mm PC ABS