Snapmaker Artisan 3-in-1 | 3D Printer Parts & Accessories

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Home
3D printers
Snapmaker Artisan 3-in-1

Snapmaker Artisan 3-in-1 3D Printer & Case 3 in 1 printer

Snapmaker Artisan 3-in-1 3D Printer & Case 81011 DKI00138

Description With the Artisan 3-in-1 3D printer & housing from Snapmaker you can create large objects of 400mm x 400mm x 400mm. Start print jobs via the large 7-inch (17.78cm) touchscreen. Thanks to the intuitive design, you can navigate through the menu effortlessly. Quick-change platforms and tools allow you to switch between 3 functions in 1 minute. The Artisan is equipped with a double extrusion 3D printing module that supports PVA, HIPS and other soluble materials. Thus complex geometry is no longer a problem. Breakaway printing is also possible. The center of the zone heated bed contains a high temperature zone of 260mm x 260mm which can reach 110°C. Place your model in the inner zone so that the outer zone does not heat up. This saves you not only time but also energy.

Get the printer calibrated in 3 easy steps so you can enjoy printing in 2 materials or 2 colours with perfect adhesion and alignment. The Snapmaker 3D printer is equipped with powerful lasers to cut quickly and deeply into materials and deliver refined laser engravings. The device is suitable for a variety of materials, including leather, brick, stainless steel and anodized aluminum. The wide-angle camera captures your material in one shot and instantly previews your laser job in the Artisan Luban software.

The printer has the following features:

Door detection sensor, gyro sensor and temperature sensor
Process various materials such as beech, jade, plywood and HDF
0.2mm dimensional accuracy
Triangulation technology to calculate the thickness of materials
Ultra-fine laser focus (0.05mm x 0.2mm)
10W power
Double sided sheet with glossy glass and PEI coating

Specifications

Tunnel code:	n/a	Max print width:	40 cm
Dimensions:	58 x 62 x 63.4 cm	Max print height:	40 cm
Input voltage:	100-240V	Printer bed levelling:	automatic
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Printer no of extruders:	2	Has CNC option:	yes
Brand:	Snapmaker	Has laser option:	yes
Weight:	52.9 kg	3D print option:	yes
Network:	WiFi	Filament sensor:	yes
Heated bed included:	yes	Printer extruder:	Direct
Camera included:	no	Max print volume:	64
Printing technique:	TFDM FFF	Our item no:	DKI00138
Hazard class:	n/a	Printer extruder max temp:	300 °C
Printer has USB:	yes	Printer voltage:	24 v/°c
Max print depth:	40 cm

Special order item - please email before ordering for availability.
This item requires a pallet delivery.

This product can be ordered 1 time(s).

£2,950.00 (sold out) (Incl. 20% VAT)
(£2,458.33 Excl. 20% VAT)

Snapmaker 2.0 10W laser module

Snapmaker 2.0 10W laser module 71028 DAR00709

Description The Snapmaker 2.0 10W laser module is incredibly fast with its 10W power. The module is equipped with the most advanced laser beam splitters, allowing more than 20 different materials to be engraved and more than 10 to be cut. But speed is not the only advantage of the Snapmaker 2.0 10W laser module. The laser focus is also smaller, so that high-quality laser work with beautiful details is delivered. You no longer have to measure the material manually, because the module calculates this for you. Thanks to the wide-angle HD camera, the material is captured in one go.

The 10W Laser Module is suitable for models of the Snapmaker 2.0 series.

Specifications

Tunnel code:	n/a	Weight:	0.63 kg
Power rating:	10 W	Hazard class:	n/a
Brand:	Snapmaker	Our item no:	DAR00709

£346.00 (Incl. 20% VAT)
(£288.33 Excl. 20% VAT)

14 day delivery

Snapmaker extension cable for Rotary Module | 1.5 meters

Snapmaker extension cable for Rotary Module | 1.5 meters 14006 DAR01177

Description Original Snapmaker extension cable to connect the rotary module. This 150 cm extension cable is suitable for the Snapmaker Artisan and the Snapmaker 2.0 models.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DAR01177
Brand:	Snapmaker

Order now, we can ship this on Monday!

£9.50 (Incl. 20% VAT)
(£7.92 Excl. 20% VAT)

in stock

Snapmaker 2.0 A350 rotary module bundle

Snapmaker 2.0 A350 rotary module bundle 71014 DAR00441

Description

Add a 4th axis and create three-dimensional artwork with the Snapmaker 2.0 A350 rotary module. This allows you to laser cut, laser engrave and CNC mill from various angles with very high precision. This module achieves a new level of detail and craftsmanship. It is possible to mount the footplate in different positions. The A350 rotary module is compatible with all current and future Snapmaker 2.0 add-ons. It can edit objects of 170mm x 68mm.

The rotary module bundle comes with an emergency stop button. It is designed for extra safety. Should something go wrong during the cutting process, simply press the button to stop the milling.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	384 x 120 x 108 mm	Our item no:	DAR00441
Brand:	Snapmaker

£677.50 (Incl. 20% VAT)
(£564.58 Excl. 20% VAT)

14 day delivery

Snapmaker Artisan PEI glass plate

Snapmaker Artisan PEI glass plate 24003 DAR01602

1
0

Description This glass PEI plate is an ideal 2-in-1 combination that allows you to easily 3D print with many different filaments. The side with the PEI coating ensures excellent bed adhesion when printing with normal materials such as PLA. The glass side can be used for printing with flexible materials. Thanks to the smooth surface, flexible prints are easy to remove and have a smooth first layer. This build plate is suitable for the Snapmaker Artisan.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£52.85 (sold out) (Incl. 20% VAT)
(£44.04 Excl. 20% VAT)

Snapmaker Artisan CNC Platform

Snapmaker Artisan CNC Platform 24004 DAR01603

1
0

Description This CNC platform is the perfect size for your Snapmaker Artisan CNC machine. The plate protects your machine as a buffer during laser cutting and engraving. You can easily install or replace the plate without tools.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£24.14 (sold out) (Incl. 20% VAT)
(£20.12 Excl. 20% VAT)

Snapmaker Artisan Quick Swap Toolhead Plate (Adjustable Version)

Snapmaker Artisan Quick Swap Toolhead Plate (Adjustable Version) 24010 DAR01606

Description This quick swap toolhead plate is specially designed to be used as an additional plate for users of the 20W/40W laser module. The plate is adjustable, allowing you to determine the firmness between the toolhead bracket and toolhead plate yourself. This product is suitable for the 10W/20W/40W laser module and the dual extrusion 3D printer module.

Please note: This product is NOT suitable for the 200W CNC module.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£24.55 (sold out) (Incl. 20% VAT)
(£20.46 Excl. 20% VAT)

Snapmaker Artisan Hotend for dual extrusion | 0.2mm

Snapmaker Artisan Hotend for dual extrusion | 0.2mm 22013 DAR01607

1
0

Description The Snapmaker Artisan hotend for dual extrusion is an optimized hotend that can be used excellently for materials such as PLA, ABS, ASA, TPU and HIPS. In addition, special filaments such as nylon with and without added carbon or glass particles are also supported. This hotend is specifically designed to be able to perform consistently at a high level with a wide variety of materials. The type and size of the hotend are automatically detected by Luban and the machine settings will also be automatically adjusted accordingly. Finally, you can quickly and easily change the module without tools. The hotend is 0.2 mm and is suitable for the Snapmaker Artisan Dual Extrusion 3D printer module and the Snapmaker 2.0 Dual Extrusion 3D printer module.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£47.85 (sold out) (Incl. 20% VAT)
(£39.88 Excl. 20% VAT)

Snapmaker Artisan Hotend for dual extrusion | 0.4mm

Snapmaker Artisan Hotend for dual extrusion | 0.4mm 22014 DAR01608

1
0

Description The Snapmaker Artisan hotend for dual extrusion is an optimized hotend that can be used excellently for materials such as PLA, ABS, ASA, TPU and HIPS. In addition, special filaments such as nylon with and without added carbon or glass particles are also supported. This hotend is specifically designed to be able to perform consistently at a high level with a wide variety of materials. The type and size of the hotend are automatically detected by Luban and the machine settings will also be automatically adjusted accordingly. Finally, you can quickly and easily change the module without tools. The hotend is 0.4 mm and is suitable for the Snapmaker Artisan Dual Extrusion 3D printer module and the Snapmaker 2.0 Dual Extrusion 3D printer module.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£47.85 (sold out) (Incl. 20% VAT)
(£39.88 Excl. 20% VAT)

Snapmaker Artisan Hotend for dual extrusion | 0.6mm

Snapmaker Artisan Hotend for dual extrusion | 0.6mm 22015 DAR01609

1
0

Description The Snapmaker Artisan hotend for dual extrusion is an optimized hotend that can be used excellently for materials such as PLA, ABS, ASA, TPU and HIPS. In addition, special filaments such as nylon with and without added carbon or glass particles are also supported. This hotend is specifically designed to be able to perform consistently at a high level with a wide variety of materials. The type and size of the hotend are automatically detected by Luban and the machine settings will also be automatically adjusted accordingly. Finally, you can quickly and easily change the module without tools. The hotend is 0.6 mm and is suitable for the Snapmaker Artisan Dual Extrusion 3D printer module and the Snapmaker 2.0 Dual Extrusion 3D printer module.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£47.85 (sold out) (Incl. 20% VAT)
(£39.88 Excl. 20% VAT)

Snapmaker Artisan Hotend for dual extrusion | 0.8mm

Snapmaker Artisan Hotend for dual extrusion | 0.8mm 22016 DAR01610

1
0

Description The Snapmaker Artisan hotend for dual extrusion is an optimized hotend that can be used excellently for materials such as PLA, ABS, ASA, TPU and HIPS. In addition, special filaments such as nylon with and without added carbon or glass particles are also supported. This hotend is specifically designed to be able to perform consistently at a high level with a wide variety of materials. The type and size of the hotend are automatically detected by Luban and the machine settings will also be automatically adjusted accordingly. Finally, you can quickly and easily change the module without tools. The hotend is 0.8 mm and is suitable for the Snapmaker Artisan Dual Extrusion 3D printer module and the Snapmaker 2.0 Dual Extrusion 3D printer module.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£47.85 (sold out) (Incl. 20% VAT)
(£39.88 Excl. 20% VAT)

Snapmaker Artisan Hotend for dual extrusion | 0.4 mm Hardened steel

Snapmaker Artisan Hotend for dual extrusion | 0.4 mm Hardened steel 22017 DAR01611

1
0

Description The Snapmaker Artisan hotend for dual extrusion is an optimized hotend made of hardened steel that is excellent for materials such as PLA, ABS, ASA, TPU and HIPS. In addition, special filaments such as nylon with and without added carbon or glass particles are also supported. This hotend is specifically designed to consistently perform at a high level with a wide variety of materials. The type and size of the hotend are automatically detected by Luban and the machine settings will also be automatically adjusted accordingly. Finally, you can quickly and easily change the module without tools. The hotend is 0.4 mm and is suitable for the Snapmaker Artisan Dual Extrusion 3D printer module and the Snapmaker 2.0 Dual Extrusion 3D printer module.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£52.85 (sold out) (Incl. 20% VAT)
(£44.04 Excl. 20% VAT)

Snapmaker Artisan Straight Cutting V-Bits (3 Pack)

Snapmaker Artisan Straight Cutting V-Bits (3 Pack) 22005 DAR01612

2
1
0

Description The Snapmaker Artisan straight cutting V-bits are made of UF20 Tungsten steel with high hardness and wear resistance. Thanks to the longer shaft and wider groove, engraving cylinders becomes more efficient. These bits are suitable for the Snapmaker 2.0 and the Snapmaker Artisan, for both the 4-axis CNC and the normal CNC. This package contains 3 pieces.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Snapmaker

£14.56 (sold out) (Incl. 20% VAT)
(£12.13 Excl. 20% VAT)

Snapmaker Artisan 3-in-1 Premium 40 Watt 3D Printer & Enclosure

Snapmaker Artisan 3-in-1 Premium 40 Watt 3D Printer & Enclosure DKI00307

Description Bring all your creative ideas to life with the Snapmaker Artisan 3-in-1 Premium. This machine allows you to use no less than 3 techniques: 3D printing, laser engraving and laser cutting. The possibilities are endless thanks to the work surface of 400 mm × 400 mm × 400 mm. The Artisan 3-in-1 Premium has a class 1 certification for safety, which means that the laser is safe to use. The full metal design and sturdy linear rails make it a durable design.

Easy to use
Switch easily and quickly between the different options. Use the 40 W laser engraving module, the 200 W CNC laser cutting module and the dual extrusion 3D printing option. Use the dual extrusion in combination with soluble filament to, for example, be able to remove supports more easily after printing. The quick swap design makes it possible to easily exchange both the different modules and platforms as well as hotends.

Useful features
The advanced vibration compensation helps to work accurately, even at high speeds. This allows the machine to produce straight lines and you get a better end result. The camera gives you a direct and complete view of your laser work. Because the CNC module can handle up to 200 W, it is possible to use many different materials, including hardwood, jade and other hard materials. The wide 7 inch touchscreen has an intuitive UI design, making it easy to operate. Use the Luban software and get started on your project quickly.

Specifications

Tunnel code:	n/a	Max print depth:	40 cm
Dimensions:	58 x 62 x 63.4 cm	Max print width:	40 cm
Input voltage:	100-240V	Max print height:	40 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Printer no of extruders:	2	Heatbed max temp:	110 °C
Brand:	Snapmaker	Has CNC option:	yes
Weight:	52.9 kg	Has laser option:	yes
Network:	WiFi	3D print option:	yes
Heated bed included:	yes	Filament sensor:	yes
Camera included:	no	Printer extruder:	Direct
Printing technique:	TFDM FFF	Max print volume:	64
Hazard class:	n/a	Printer extruder max temp:	300 °C
Printer has USB:	yes	Printer voltage:	24 v/°c

This item is shipped on a pallet due to its weight/size.

Please note: This item has an average delivery time of 1 week.

£2,789.00 (sold out) (Incl. 20% VAT)
(£2,324.17 Excl. 20% VAT)

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

123-3D 3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

14 day delivery

Steelmans 3dB noise reduction feet pads

Steelmans3D Steelmans 3dB noise reduction feet pads 3DB-V1 DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this on Monday!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

© 2025 - 123-3d.co.uk