Snapmaker Artisan 3-in-1 Multifunction printers Printing technique 3D printers Snapmaker Artisan 3-in-1 3D Printer & Case 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

£6.29

Snapmaker Artisan 3-in-1 3D Printer & Case 3 in 1 printer

Snapmaker Artisan 3-in-1 3D Printer & Case 81011 DKI00138

Zoom in

Description With the Artisan 3-in-1 3D printer & housing from Snapmaker you can create large objects of 400mm x 400mm x 400mm. Start print jobs via the large 7-inch (17.78cm) touchscreen. Thanks to the intuitive design, you can navigate through the menu effortlessly. Quick-change platforms and tools allow you to switch between 3 functions in 1 minute. The Artisan is equipped with a double extrusion 3D printing module that supports PVA, HIPS and other soluble materials. Thus complex geometry is no longer a problem. Breakaway printing is also possible. The center of the zone heated bed contains a high temperature zone of 260mm x 260mm which can reach 110°C. Place your model in the inner zone so that the outer zone does not heat up. This saves you not only time but also energy.

Get the printer calibrated in 3 easy steps so you can enjoy printing in 2 materials or 2 colours with perfect adhesion and alignment. The Snapmaker 3D printer is equipped with powerful lasers to cut quickly and deeply into materials and deliver refined laser engravings. The device is suitable for a variety of materials, including leather, brick, stainless steel and anodized aluminum. The wide-angle camera captures your material in one shot and instantly previews your laser job in the Artisan Luban software.

The printer has the following features:

Door detection sensor, gyro sensor and temperature sensor
Process various materials such as beech, jade, plywood and HDF
0.2mm dimensional accuracy
Triangulation technology to calculate the thickness of materials
Ultra-fine laser focus (0.05mm x 0.2mm)
10W power
Double sided sheet with glossy glass and PEI coating

Specifications

Tunnel code:	n/a	Max print width:	40 cm
Dimensions:	58 x 62 x 63.4 cm	Max print height:	40 cm
Input voltage:	100-240V	Printer bed levelling:	automatic
Filament diameter:	1.75 mm	Heatbed max temp:	110 °C
Printer no of extruders:	2	Has CNC option:	yes
Brand:	Snapmaker	Has laser option:	yes
Weight:	52.9 kg	3D print option:	yes
Network:	WiFi	Filament sensor:	yes
Heated bed included:	yes	Printer extruder:	Direct
Camera included:	no	Max print volume:	64
Printing technique:	TFDM FFF	Our item no:	DKI00138
Hazard class:	n/a	Printer extruder max temp:	300 °C
Printer has USB:	yes	Printer voltage:	24 v/°c
Max print depth:	40 cm

Special order item - please email before ordering for availability.
This item requires a pallet delivery.

This product can be ordered 1 time(s).

£2,730.49 (Incl. 20% VAT)
(£2,275.41 Excl. 20% VAT)

14 day delivery

Snapmaker 2.0 10W laser module

Zoom in

Description The Snapmaker 2.0 10W laser module is incredibly fast with its 10W power. The module is equipped with the most advanced laser beam splitters, allowing more than 20 different materials to be engraved and more than 10 to be cut. But speed is not the only advantage of the Snapmaker 2.0 10W laser module. The laser focus is also smaller, so that high-quality laser work with beautiful details is delivered. You no longer have to measure the material manually, because the module calculates this for you. Thanks to the wide-angle HD camera, the material is captured in one go.

The 10W Laser Module is suitable for models of the Snapmaker 2.0 series.

Specifications

Tunnel code:	n/a	Weight:	0.63 kg
Power rating:	10 W	Hazard class:	n/a
Brand:	Snapmaker	Our item no:	DAR00709

£346.00 (Incl. 20% VAT)
(£288.33 Excl. 20% VAT)

14 day delivery

Snapmaker extension cable for Rotary Module | 1.5 meters

Zoom in

Description Original Snapmaker extension cable to connect the rotary module. This 150 cm extension cable is suitable for the Snapmaker Artisan and the Snapmaker 2.0 models.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Cable length:	150 cm	Our item no:	DAR01177
Brand:	Snapmaker

Order now, we can ship this today!

£9.50 (Incl. 20% VAT)
(£7.92 Excl. 20% VAT)

in stock

Snapmaker 2.0 A350 rotary module bundle

Zoom in

Description

Add a 4th axis and create three-dimensional artwork with the Snapmaker 2.0 A350 rotary module. This allows you to laser cut, laser engrave and CNC mill from various angles with very high precision. This module achieves a new level of detail and craftsmanship. It is possible to mount the footplate in different positions. The A350 rotary module is compatible with all current and future Snapmaker 2.0 add-ons. It can edit objects of 170mm x 68mm.

The rotary module bundle comes with an emergency stop button. It is designed for extra safety. Should something go wrong during the cutting process, simply press the button to stop the milling.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	384 x 120 x 108 mm	Our item no:	DAR00441
Brand:	Snapmaker

£677.50 (sold out) (Incl. 20% VAT)
(£564.58 Excl. 20% VAT)

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

Order now, we can ship this today!

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

in stock

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this today!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

Calex Smart WiFi smoke detector

Zoom in

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Have you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz WiFi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Tunnel code:	n/a	Weight:	0.23 kg
Dimensions:	57.15 mm	Hazard class:	n/a
Diameter:	110 mm	WiFi:	2.4 GHz
Colour:	white	Our item no:	LCA00437
Brand:	Calex

£26.25 (sold out) (Incl. 20% VAT)
(£21.88 Excl. 20% VAT)

Calex Smart mini indoor camera (1080p)

Zoom in

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	53 x 32 x 110 mm	WiFi:	2.4 GHz
Colour:	white	Our item no:	LCA00572
Brand:	Calex

£34.95 (sold out) (Incl. 20% VAT)
(£29.13 Excl. 20% VAT)

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Snapmaker Artisan 3-in-1

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Snapmaker Artisan 3-in-1