Flsun SR (Super Racer) Filament printers Printing technique 3D printers Flsun SR (Super Racer) Delta 3D Printer 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Flsun SR (Super Racer) Delta 3D Printer

Flsun SR (Super Racer) Delta 3D Printer DKI00115

Description The Flsun SR 3D printer is a Delta printer with a cylindrical print volume of 260mm x 330mm. Unlike most box printers/Cartesian printers which traditionally use control over each axis via a direct belt or Z-axis, a Delta printer uses three vertical axes. By adjusting the height of each axis individually, the extruder can steer in all directions (XYZ).

In the design, stepper motor-driven sliders have been chosen for the three vertical axes. The connection between them is via timing belts. Using Sliders instead of Timing belts results not only in higher accuracy but also in the possibility to print at higher speeds.

The printer can be controlled by means of the handy 3.5-inch touchscreen display that operates with Marlin open source firmware which is also compatible with various slicer programs such as Cura and Repetier.

A handy calibration tool can be used to calibrate the glass print bed. This can easily be removed via a magnetic strip and the calibration itself can be started via the touchscreen.

The Flsun SR also features a 360W power supply and exchangeable glass bed. The maximum print bed temperature that can be reached is 100°C. All electronics (except PSU) are located in the upper part of the printer.

The main features:

Max Print speed 200mm/s
Precision 0.05mm-0.3mm
Removable glass bed
32-bit motherboard
TMC2209 silent steps drivers
Supported file type: GCODE

Specifications

Tunnel code:	n/a	Max print depth:	26 cm
Dimensions:	440 x 390 x 960 mm	Max print width:	26 cm
Power rating:	360 W	Max print height:	33 cm
Input voltage:	115-230V	Printer bed levelling:	automatic
Filament diameter:	1.75 mm	Heatbed max temp:	100 °C
Nozzle diameter:	0.4 mm	Has CNC option:	no
Printer no of extruders:	1	Has laser option:	no
Brand:	Flsun	3D print option:	yes
Weight:	13.6 kg	Filament sensor:	yes
Network:	no	Printer extruder:	Bowden
Heated bed included:	yes	Max print volume:	17.511
Camera included:	no	Our item no:	DKI00115
Printing technique:	TFDM FFF	Printer extruder max temp:	260 °C
Hazard class:	n/a	Printer voltage:	24 v/°c
Printer has USB:	yes

Extra Information

3D Filament
Print bed accessories
Cleaning items

£334.00 (sold out) (Incl. 20% VAT)
(£278.33 Excl. 20% VAT)

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.40mm 600-A-CHT-VOL-175-40 DAR00946

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.4mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Tunnel code:	n/a	Brand:	Bondtech
Material:	copper	Nozzle coating:	nickel plated
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR00946
Screwthread type:	M6

Order now, we can ship this today!

£46.54 (Incl. 20% VAT)
(£38.78 Excl. 20% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.60mm 600-A-CHT-VOL-175-60 DAR00947

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.6mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Tunnel code:	n/a	Brand:	Bondtech
Material:	copper	Nozzle coating:	nickel plated
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR00947
Screwthread type:	M6

Order now, we can ship this today!

£46.59 (Incl. 20% VAT)
(£38.83 Excl. 20% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 0.80mm 600-A-CHT-VOL-175-80 DAR00948

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 0.8mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Tunnel code:	n/a	Brand:	Bondtech
Material:	copper	Nozzle coating:	nickel plated
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DAR00948
Screwthread type:	M6

Order now, we can ship this today!

£46.54 (Incl. 20% VAT)
(£38.78 Excl. 20% VAT)

in stock

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm x 1.00mm 600-A-CHT-VOL-175-10 DAR00949

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on the material, hardware and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The product has an opening of 1mm and is suitable for filament with a diameter of 1.75mm, but is also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
FLSUN V400
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Tunnel code:	n/a	Brand:	Bondtech
Material:	brass	Nozzle coating:	nickel plated
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	1 mm	Our item no:	DAR00949
Screwthread type:	M6

£46.54 (Incl. 20% VAT)
(£38.78 Excl. 20% VAT)

14 day delivery

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack)

Bondtech CHT® BiMetal Volcano coated nozzle, 1.75mm (4-pack) 600-A-CHT-VOL-175-T DAR00959

Description The Bondtech CHT® BiMetal Volcano coated nozzle has a copper body and a nickel coating and is ideal for high flow applications. The nozzle can increase the maximum volume flow of your Volcano heat block by 25 to 65%. This depends on used hardware, materials and print settings. In addition, the nozzle is abrasion resistant and therefore suitable for use with abrasive materials. The package contains 4 nozzles with the following openings: 1 x 0.4mm, 1 x 0.6mm, 1 x 0.8mm and 1 x 1mm.

The nozzles are suitable for filament with a diameter of 1.75mm, but are also compatible with 2.85mm filament.

Can be used with the following blocks/printers:

E3D Volcano blocks
Other Volcano Blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder

Specifications

Tunnel code:	n/a	Brand:	Bondtech
Material:	copper	Nozzle coating:	nickel plated
Filament diameter:	1.75 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR00959
Quantity:	4

£166.58 (Incl. 20% VAT)
(£138.82 Excl. 20% VAT)

14 day delivery

Mintion Beagleprint 3D Printer Camera (32GB)

Mintion Beagleprint 3D Printer Camera (32GB) DAR00873

Description Monitor and remotely control your 3D printer? The Mintion Beagleprint 3D Printer Camera makes it possible. The camera allows you to monitor and control printing processes remotely and in real time. If something goes wrong, you'll know right away. You can then simply stop printing using the app. This prevents a print from completely failing and filament being lost unnecessarily. Because the camera has a night mode, no extra lighting is needed when filming in the dark – useful if your printer also works overtime at night. So you save on energy!

An image is also made after printing each layer. And without any setting or command, the camera then generates a beautiful Time-lapse video. You can download this via the app or your PC. The camera is suitable for a large number of 3D printers.

Check here whether your printer is compatible.

Specifications

Tunnel code:	n/a	Network:	WiFi
Brand:	Mintion	Hazard class:	n/a
Storage:	32GB	Our item no:	DAR00873
Weight:	0.15 kg

Order now, we can ship this today!

£52.00 (Incl. 20% VAT)
(£43.33 Excl. 20% VAT)

in stock

Flsun V400 extruder

Flsun V400 extruder DAR00998

Description This Flsun extruder is an original replacement part for Flsun V400 3D printers.

Specifications

Tunnel code:	n/a	Brand:	Flsun
Input voltage:	-	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR00998

£42.95 (Incl. 20% VAT)
(£35.79 Excl. 20% VAT)

14 day delivery

Flsun SR Touch screen

Flsun SR Touch screen DAR01008

Description This Flsun SR Touchscreen is an original replacement part for Flsun 3D printers.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Flsun	Our item no:	DAR01008
Weight:	0.2 kg

£43.05 (Incl. 20% VAT)
(£35.88 Excl. 20% VAT)

14 day delivery

Flsun SR hotend kit

Flsun SR hotend kit DAR01009

Description This Flsun SR hotend kit is an original replacement part for the hotend of Flsun 3D printers.

Specifications

Tunnel code:	n/a	Brand:	Flsun
Filament diameter:	1.75 mm	Hazard class:	n/a
Screwthread type:	M6	Our item no:	DAR01009

£8.26 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

14 day delivery

Flsun SR glass plate 270 x 4 mm

Flsun SR glass plate 270 x 4 mm DAR01010

Description This Flsun SR glass plate is perfect for Flsun SuperRacer models. The glass plate is super flat, does not deform, is durable, has good hardness and is compatible with many models. It is an original replacement part for Flsun SuperRacer 3D printers.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Flsun	Our item no:	DAR01010

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

Flsun SR heater block

Flsun SR heater block DAR01012

Description This Flsun SR heater block is an original part for Flsun SuperRacer models. The heating block has good heat resistance and excellent thermal conductivity.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Flsun	Our item no:	DAR01012

£8.50 (Incl. 20% VAT)
(£7.08 Excl. 20% VAT)

14 day delivery

Flsun SR/Q5 heater cartridge 24V | 40W (original)

Flsun SR/Q5 heater cartridge 24V | 40W (original) DAR01014

Description The Flsun SR/Q5 heater cartridge is an original replacement part for Flsun 3D printers. This heating element brings your hotend to the right temperature very quickly. The cable length is 17 cm.

Specifications

Tunnel code:	n/a	Cartridge diameter:	6 mm
Power rating:	40 W	Brand:	Flsun
Voltage:	24 v	Hazard class:	n/a
Cable length:	17 cm	Our item no:	DAR01014
Cartridge length:	20 mm

This product can be ordered 1 time(s).

£6.50 (sold out) (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

Flsun SR/Q5 hotend thermistor

Flsun SR/Q5 hotend thermistor DAR01015

Description This original Flsun SR/Q5 hotend thermistor has a cable length of 18 cm and is an original replacement part for Flsun 3D printers.

Specifications

Tunnel code:	n/a	Brand:	Flsun
Max temp:	300 °C	Hazard class:	n/a
Cable length:	18 cm	Our item no:	DAR01015

This product can be ordered 1 time(s).

£5.60 (sold out) (Incl. 20% VAT)
(£4.67 Excl. 20% VAT)

Flsun SR/Q5 Heatsink

Flsun SR/Q5 Heatsink DAR01021

Description This Flsun heatsink is suitable for 1.75 mm filament. When inserting filament, cut the tip diagonally to facilitate insertion. This heatsink can be used as a replacement or spare part.

This product can be used for the Flsun SR and the Flsun Q5.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01021
Brand:	Flsun

£9.82 (Incl. 20% VAT)
(£8.18 Excl. 20% VAT)

14 day delivery

Mintion Beagleprint V2 3D Printer Camera (32GB)

Mintion Beagleprint V2 3D Printer Camera (32GB) DAR01218

1
0

Description The Mintion Beagle V2 3D printer camera is based on its predecessor: the Beagle camera. The V2 has a focus lens that you adjust manually to get the best 1080P images. It has dual band WiFi at 2.4 GHz/5 GHz and a more powerful chipset than the original Beagle. This camera is compatible with many different printers, including the Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1 3D printers, the Anycubic Kobra 2 / Kobra Max / Vyper 3D printers and the Prusa MK3+ / MK4 3D printers

Plug and play
You don't need many steps to use this camera. Power the camera and connect it to the printer, download the Beagle app and create your account. Then scan the QR code to connect to the 2.4 G/5 G WiFi network. With the Beagle V2 camera it is possible to control multiple 3D printers simultaneously via the app.

At a distance
With the Beagle V2 and the Beagleprint app you can monitor your printing process in real time anywhere. When you see problems occurring, you can pause the printer to avoid unnecessary filament waste. The app will also notify you when the print is paused, paused or completed. The camera can also be used via the browser if they are both connected to the same LAN.

Time lapse
This camera comes with 4 different timelapse options: clean, normal, Beagle UV and timer. The 'clean' option will move the hotend and the PCB after a layer has been printed. This makes it appear as if the print is being printed by itself. With the 'normal' option, the hot end and the printed circuit board do not move after a layer has been printed. This will cause the hotend to be present in the timelapse video. To create a timelapse video from a resin print, you can use the 'Beagle UV' option. This works with a UV sensor to create the video. When the camera receives a signal from the UV sensor, it will be activated. If you want to make a timelapse video without the camera connected to the printer, you can use the 'timer' option.

Specifications

Tunnel code:	n/a	Network:	WiFi
Brand:	Mintion	Hazard class:	n/a
Storage:	32GB	Our item no:	DAR01218
Weight:	0.15 kg	Replaces item no:	DAR00873

£82.50 (sold out) (Incl. 20% VAT)
(£68.75 Excl. 20% VAT)

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

123-3D 3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

Order now, we can ship this today!

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

in stock

Steelmans 3dB noise reduction feet pads

Steelmans3D Steelmans 3dB noise reduction feet pads 3DB-V1 DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this today!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

Calex Smart WiFi smoke detector

Calex Smart WiFi smoke detector 429220 LCA00437

Description This smart smoke detector from Calex ensures that you are informed of smoke in your home wherever you are. The powerful 85dB alarm tone warns you when you are at home. Have you gone out? Then you will receive a notification on your Calex app.

The smoke detector is completely wireless and can therefore be placed anywhere. The sensor works on batteries and lasts about 10 years. If the batteries are almost empty, the smoke alarm will let you know in good time. Connection is via 2.4GHz WiFi. In addition, the sensor can be used with Google Assistant and Amazon Alexa.

With the Calex smart app, the smoke detector can also be programmed, and other smart devices can be set to respond when the smoke detector goes off. For example, you can turn off your 3D printer if it is connected to a smart plug.

Download the Calex Smart app
To use the product optimally, install the free Calex Smart app on your phone or tablet (suitable for Apple or Android). Don't want to use the app for a while? You can also operate the smoke detector with the Calex remote control.

Works with: Tuya, Google* and Alexa*
*Voice Assistant is required to use Google or Alexa.

Specifications

Tunnel code:	n/a	Weight:	0.23 kg
Dimensions:	57.15 mm	Hazard class:	n/a
Diameter:	110 mm	WiFi:	2.4 GHz
Colour:	white	Our item no:	LCA00437
Brand:	Calex

£26.25 (sold out) (Incl. 20% VAT)
(£21.88 Excl. 20% VAT)

Calex Smart mini indoor camera (1080p)

Calex Smart mini indoor camera (1080p) 429260 LCA00572

Description With this compact smart camera from Calex you can keep an eye on everything. The images that the mini camera makes can be viewed via an app on your phone or tablet. This way you will never have the feeling that your home is unprotected. The camera detects movement and then immediately sends a message to your phone, so that nothing escapes you. The camera continues to film even in the dark.

You can change various settings and view the camera images via the app. Thanks to the integrated microphone, you can communicate with each other. The app is suitable for both Android and Apple. In addition, the mini camera can be linked to other smart products from Calex.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	53 x 32 x 110 mm	WiFi:	2.4 GHz
Colour:	white	Our item no:	LCA00572
Brand:	Calex

£34.95 (sold out) (Incl. 20% VAT)
(£29.13 Excl. 20% VAT)

© 2024 - 123-3d.co.uk