Flashforge Creator 3 Pro Filament printers Printing technique 3D printers Flashforge Creator 3 Pro 3D Printer 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

£6.29

Flashforge Creator 3 Pro 3D Printer

Zoom in

Description Introducing the new Flashforge Creator 3 Pro: the second generation with additional optimisations! This allows you to print even more effectively and professionally.

The most important upgrades

Optimised extruder for better results with technical filaments
Upgraded movement system for a more accurate printing result
Refined levelling sensors for more accurate print positions
Improved print bed that is flexible and heats up at lightning speed

Dual extruders
The Flashforge Creator 3 Pro has two independent print heads. This allows you to simultaneously print two different objects or with two different materials, such as PLA and PVA. The speed of the dual fans on the renewed extruders can be controlled, so that prints with technical filament get a better quality. The nozzle and heating element are integrated and work perfectly together. The improved sensors also ensure a more accurate print position.

The maximum temperature of the extruders has been increased to 320°C. The printer comes with a standard 0.4mm nozzle, but you can swap it with a 0.6 or 0.8mm nozzle.

Heated bed
The renewed heated bed heats up to 110°C in just 3 minutes! The maximum temperature is 120°C. The flexible print bed makes it easy to remove printed objects. The bed also has a built-in magnet, so you can easily attach it to and remove it from the platform. You can adjust the bed and the two print heads automatically via the 4.3 inch touchscreen.

Other specifications
You can connect the printer via USB, WiFi or Ethernet. With the built-in camera you can monitor the progress of the prints in real-time. Is the printer connected to WiFi or Ethernet? Then you can even monitor this from anywhere. The printer has sensors that detect the filament and give a warning when the filament has run out. In addition, it also includes a HEPA13 air filter and 8 GB of internal storage. Flashforge's FlashPrint software is included as standard, but you can also use other well-known slicing software.

Specifications

Tunnel code:	n/a	Max print depth:	30 cm
Dimensions:	48.5 x 62.7 x 61.5 cm	Max print width:	25 cm
Power rating:	650 W	Max print height:	20 cm
Input voltage:	100-240V	Printer bed levelling:	automatic
Filament diameter:	1.75 mm	Heatbed max temp:	120 °C
Nozzle temp range:	0-300 °C	Has CNC option:	no
Printer no of extruders:	2	Has laser option:	no
Brand:	Flashforge	3D print option:	yes
Weight:	40 kg	Filament sensor:	no
Network:	work ethernet WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	15
Camera included:	yes	Our item no:	DCP00220
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c
Printer has USB:	yes

£1,324.00 (sold out) (Incl. 20% VAT)
(£1,103.33 Excl. 20% VAT)

Zortrax DSS Station

Zoom in

Description Use Zortrax's DSS Station to automatically remove water-soluble carriers. Fill the device with water and place your model in the machine. After a few hours, the support structures are removed. The Zortrax DSS Station is suitable for Z-SUPPORT, Z-SUPPORT Plus and Z-SUPPORT Premium materials. It is also compatible with all water-soluble filaments.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Dimensions:	235 x 238 x 295 mm	Weight:	8.4 kg
Power rating:	1,000 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR00830

£538.50 (sold out) (Incl. 20% VAT)
(£448.75 Excl. 20% VAT)

Flashforge Creator 3 Pro left hotend hardened steel | 0.4 nozzle

Description This hardened steel left hotend with 0.4 mm nozzle is an original replacement part from Flashforge. The part is delivered fully assembled. This hotend is suitable for the Flashforge Creator 3 Pro 3D printer.

Specifications

Tunnel code:	n/a	Brand:	Flashforge
Material:	steel	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01240
Nozzle diameter:	0.4 mm

£49.50 (Incl. 20% VAT)
(£41.25 Excl. 20% VAT)

14 day delivery

Flashforge Creator 3 Pro right hotend hardened steel | 0.4 nozzle

Zoom in

Description This hardened steel right hotend with 0.4 mm nozzle is an original replacement part from Flashforge. The part is delivered fully assembled. This hotend is suitable for the Flashforge Creator 3 Pro 3D printer.

Specifications

Tunnel code:	n/a	Brand:	Flashforge
Material:	steel	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01241
Nozzle diameter:	0.4 mm

£49.50 (sold out) (Incl. 20% VAT)
(£41.25 Excl. 20% VAT)

Flashforge Leveling Sensor Creator 3 Pro

Zoom in

Description This Flashforge Leveling Sensor for the Creator 3 Pro is an original replacement part from Flashforge. The sensor helps you level your print bed, so you can make perfect prints.

Specifications

Brand:

Flashforge

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

14 day delivery

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this on Monday!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Flashforge Creator 3 Pro

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Flashforge Creator 3 Pro