Creality 3D CR-10S Pro Filament printers Printing technique 3D printers Heated bed spring, 25mm (4-pack) 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Creality3D Creality 3D CR-10S Pro service kit 200103419 DHO00003

Description This complete service kit is suitable for the CR-10S Pro. Of course, it can also be used for DIY 3D printers. The hotend is suitable for 1.75mm filament. The operating voltage of the heating element is 24V.

The kit contains the following parts:

2 x Nozzle
1 x Heater cartridge
1 x Thermistor
2 x V-lock wheel
2 x Endstop
1 x 2 metre timing belt

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DHO00003

Order now, we can ship this on Monday!

£17.25 (Incl. 20% VAT)
(£14.38 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this on Monday!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Zoom in

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Tunnel code:	n/a	Weight:	0.01 kg
Cable length:	15 cm	Manual:	Download
Brand:	ANTCLABS	Hazard class:	n/a
Voltage VDC:	5 v/°c	Our item no:	DAR00016

Order now, we can ship this on Monday!

£29.60 (Incl. 20% VAT)
(£24.67 Excl. 20% VAT)

in stock

Heated bed spring, 25mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Tunnel code:	n/a	Inner diameter:	5 mm
Length:	25 mm	Outer diameter:	8 mm
Colour:	orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00139

Order now, we can ship this on Monday!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

Heated bed spring, 30mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Tunnel code:	n/a	Inner diameter:	5 mm
Length:	30 mm	Outer diameter:	8 mm
Colour:	orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00298

Order now, we can ship this on Monday!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 760mm x 650mm x 720mm

Zoom in

Description The Creality 3D printer housing (M) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 760mm x 650mm x 720mm, it is suitable for open-frame printers such as the Ender-3 series, Ender-5 (Pro) CP-01, CR-X, CR-6 SE, CR-10 (S/Pro/ Mini/V2/V3), CR-20 series and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	760 x 650 x 720 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00262

Extra information

Video

Order now, we can ship this on Monday!

£74.50 (Incl. 20% VAT)
(£62.08 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 700mm x 750mm x 900mm

Zoom in

Description The Creality 3D printer housing (L) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. With dimensions of 700mm x 750mm x 900mm, it is suitable for open-frame printers such as the Ender-3 series, Ender-5 (Pro/Plus) CP-01, CR-X (Pro), CR-6 SE, CR-10 (S/Pro/Mini/V2/V3), CR-20 series and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	700 x 750 x 900 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00263

Extra information

Video

Order now, we can ship this on Monday!

£78.50 (Incl. 20% VAT)
(£65.42 Excl. 20% VAT)

in stock

Mean Well closed chassis power supply | 24V | 504W, 21A

Zoom in

Description This 21A switching power supply with PFC is protected against short circuit, overload and overvoltage between 13.8V - 16.2V. The power supply is suitable for professional use and must be installed by a qualified technician. Input voltage: 115V / 230V.

This power supply has a DC voltage of 24V and is suitable for a maximum consumption of 504W.

Additional product information (PDF)

Specifications

Tunnel code:	n/a	Brand:	MEAN WELL
Dimensions:	230 x 127 x 40.5 mm	Current rating:	21 A
Power rating:	504 W	Weight:	1.3 kg
Input voltage:	100-240V	Hazard class:	n/a
Output voltage:	24 v/°c	Our item no:	DAR00046

Order now, we can ship this on Monday!

£139.95 (Incl. 20% VAT)
(£116.63 Excl. 20% VAT)

in stock

Creality 3D CR-10 S Pro bonding platform sticker, 310mm x 320mm

Zoom in

Description With this Creality 3D adhesive platform sticker you can provide your current print surface with a new adhesive layer if the original print surface is damaged.

The sticker has a good 3M adhesive layer, so the sticker adheres very well to the heatbed of your printer. This Creality sticker is compatible with the Creality CR-10 3D printer.

Note: This is the sticker only. You must remove your old decal before applying the new decal.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	32 x 31 cm	Our item no:	DAR00021
Brand:	Creality3D

Order now, we can ship this on Monday!

£17.25 (Incl. 20% VAT)
(£14.38 Excl. 20% VAT)

in stock

Creality 3D CR-10S Pro glass plate, 310mm x 320mm x 4mm

Zoom in

Description This Creality 3D glass plate for the CR-10S Pro 3D printer is made of tempered glass and provided with an Ultrabase coating for perfect adhesion of the 3D prints. The glass plate is easy to clean with water.

Note: Extreme adhesion of PETG filament can damage the glass.

Due to the thickness of 4mm, the glass plate cannot fit on the original clamps on the bed.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	310 x 320 x 4 mm	Our item no:	DHB00039
Brand:	Creality3D

Order now, we can ship this on Monday!

£21.25 (Incl. 20% VAT)
(£17.71 Excl. 20% VAT)

in stock

Micro Swiss all metal hotend kit for Creality CR-10S PRO | CR-10 Max

Zoom in

Description

This all metal hotend set from Micro Swiss for the Creality CR-10S Pro is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and thus ensures better heat dissipation.

The heatbreak is made of fifth grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost 3x lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heatbreak
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
Silicone sock
Fasteners

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
	●	Creality CR-10S Pro
	●	Creality CR 10 Max

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00022

Order now, we can ship this on Monday!

£57.50 (Incl. 20% VAT)
(£47.92 Excl. 20% VAT)

in stock

Micro Swiss nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6x.75mm, 1.75mm x 0.20mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.2mm.

Compatible with the following printers:
	●	CR-10S Pro (Original hotend)
	●	CR-10S Pro V2 (Original hotend)
	●	CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Material:	brass	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.2 mm	Our item no:	DMS00117
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£15.50 (Incl. 20% VAT)
(£12.92 Excl. 20% VAT)

in stock

Micro Swiss nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6x.75mm, 1.75mm x 0.30mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.3mm.

Compatible with the following printers:
	●	CR-10S Pro (Original hotend)
	●	CR-10S Pro V2 (Original hotend)
	●	CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Material:	brass	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.3 mm	Our item no:	DMS00118
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£15.50 (Incl. 20% VAT)
(£12.92 Excl. 20% VAT)

in stock

Micro Swiss nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6x.75mm, 1.75mm x 0.40mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.4mm.

Compatible with the following printers:
	●	CR-10S Pro (Original hotend)
	●	CR-10S Pro V2 (Original hotend)
	●	CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Material:	brass	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00089
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£15.50 (Incl. 20% VAT)
(£12.92 Excl. 20% VAT)

in stock

Micro Swiss nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6x.75mm, 1.75mm x 0.60mm

Zoom in

Description The Micro Swiss brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.6mm.

Compatible with the following printers:
	●	CR-10S Pro (Original hotend)
	●	CR-10S Pro V2 (Original hotend)
	●	CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Material:	brass	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DMS00090
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£15.50 (Incl. 20% VAT)
(£12.92 Excl. 20% VAT)

in stock

Micro Swiss nozzle for Creality CR-10S Pro/CR-10 Max hotend | M6x.75mm, 1.75mm x 0.80mm

Zoom in

Description The Micro Swiss Brass nozzle is covered with a TwinClad XT composite nickel coating, which ensures very low friction. This coating is very hard and wear-resistant, making printing with carbon, metal or wood filament also possible.

The nozzle is suitable for filament with a diameter of 1.75mm and has an opening of 0.8mm.

Compatible with the following printers:
	●	CR-10S Pro (Original hotend)
	●	CR-10S Pro V2 (Original hotend)
	●	CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Material:	brass	Nozzle coating:	twinclad XT
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DMS00119
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£15.50 (Incl. 20% VAT)
(£12.92 Excl. 20% VAT)

in stock

Brass 0.4mm nozzle for 1.75mm filament (123-3D version)

Zoom in

Description This compatible nozzle is suitable for MK8 extruders and intended for filament with a diameter of 1.75mm. The nozzle has an opening of 0.4mm and is equipped with M6 x 0.75mm screw thread. MK8 nozzles are slightly shorter than the older MK7 version. The nozzle is compatible with the Creality CR-10S Pro and the CR-10 Max, among others.

Compatible with the following printers:
	●	CR-10S Pro (Original hotend)
	●	CR-10S Pro V2 (Original hotend)
	●	CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMK00033
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Creality M6x.75 brass nozzle, 0.20mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.2mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hotend)
		CR-10S Pro V2 (Original hotend)
		CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.2 mm	Our item no:	DAR00295
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Creality M6x.75 brass nozzle, 0.30mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.3mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hotend)
		CR-10S Pro V2 (Original hotend)
		CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.3 mm	Our item no:	DAR00296
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Creality M6x.75 brass nozzle, 0.40mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.4mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hotend)
		CR-10S Pro V2 (Original hotend)
		CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR00297
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Ceality M6x.75 brass nozzle, 0.50mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.5mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hotend)
		CR-10S Pro V2 (Original hotend)
		CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.5 mm	Our item no:	DAR00298
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Creality M6x.75 brass nozzle, 0.60mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6x.75 thread and has an opening of 0.6mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hotend)
		CR-10S Pro V2 (Original hotend)
		CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm	Our item no:	DAR00299
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Creality M6x.75 brass nozzle, 0.80mm (123-3D version)

Zoom in

Description This nozzle is suitable for hotends with an M6 x.75 thread and has an opening of 0.8mm. The nozzle is made of brass and suitable for 1.75mm filament.

Compatible with the following printers:
		CR-10S Pro (Original hotend)
		CR-10S Pro V2 (Original hotend)
		CR-10 Max (Original hotend)

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DAR00300
Screwthread type:	M6X75

Order now, we can ship this on Monday!

£5.95 (Incl. 20% VAT)
(£4.96 Excl. 20% VAT)

in stock

Creality 3D Sonic Pad

Zoom in

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Tunnel code:	n/a	Weight:	0.46 kg
Dimensions:	222 x 128 x 40 mm	Standard WiFi connection:	802.11 b/g/n
Colour:	black	Hazard class:	n/a
Voltage:	12 v	Our item no:	DAR00885
Brand:	Creality3D

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£133.00 (Incl. 20% VAT)
(£110.83 Excl. 20% VAT)

in stock

Creality 3D CR-10S Pro and CR-10 Max transfer board

Zoom in

Description This transfer board forms the link between the flat cable and the extruder of the CR-10S Pro and the CR-10 Max.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00032

Order now, we can ship this on Monday!

£23.25 (Incl. 20% VAT)
(£19.38 Excl. 20% VAT)

in stock

Creality 3D CR-10S Pro & CR-10 max mainboard

Zoom in

Description This Creality 3D mainboard can be used in the CR-10S Pro and CR-10 Max 3D printers. However, the correct firmware must be installed for each compatible printer to work.

Please note we do not offer support on the installation of this product.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
On-board stepper drivers:	5	Our item no:	DRW00045
Brand:	Creality3D

£74.50 (sold out) (Incl. 20% VAT)
(£62.08 Excl. 20% VAT)

USB A to mini USB black USB 2.0 cable, 1m

Zoom in

Description This USB cable has a length of 100cm and is suitable for connecting various electronics to a computer.

Specifications

Tunnel code:	n/a	Connector A:	USB A 2 male
Insulation material:	PVC	Connector B:	Micro USB B HDMI male
Colour:	black	Hazard class:	n/a
Cable length:	100 cm	Our item no:	DDK00122
Brand:	Value Line

Not the right length?

USB A to mini USB black USB 2.0 cable, 2m for £6.60

Order now, we can ship this on Monday!

£3.10 (Incl. 20% VAT)
(£2.58 Excl. 20% VAT)

in stock

Bondtech DDX V3 PH1 for Creality CR-10 (S) Pro & Max

Zoom in

Description Bondtech's DDX V3 PH1 replaces the original Bowden extruder with a direct drive extruder setup. The model is suitable for Creality 3D printers and is compatible with hotends of almost every Creality model. You can also upgrade the hotend to Copperhead or Mosquito.

With this powerful 1.75mm Dual Drive extruder you achieve a higher print quality and you have more options, such as thinner layers, higher resolution prints with small nozzles, high flow prints with larger nozzles and a wider choice of materials.

Further highlights:

Effective hotend cooling
3:1 gear ratio
Housing parts made of polyamide (PA12) with SLS technology for maximum strength and precision

Please Note: A Bondtech DDX Adapter Kit is required to use this product.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DBO00050
Brand:	Bondtech

Order now, we can ship this on Monday!

£126.95 (Incl. 20% VAT)
(£105.79 Excl. 20% VAT)

in stock

Creality3D CR-5 Pro touch screen

Zoom in

Description This Creality3D CR-5 Pro touch screen is to replace your broken or old touch screen. It is compatible with Creality3D CR-5 Pro 3D printers.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00269

£68.20 (Incl. 20% VAT)
(£56.83 Excl. 20% VAT)

14 day delivery

Direct Drive Extruder plate for E3D Hemera Extruder (123-3D brand)

Zoom in

Description The black Direct Drive Extruder plate for E3D Hemera Extruder from 123-3D is made of anodized aluminum. It is easy to assemble on your Creality 3D printer.

This pack contains:

1 Extruder plate
1 Allen key
2 tie wraps
Set screws

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	black	Our item no:	DAR00790
Brand:	123-3D

£11.00 (Incl. 20% VAT)
(£9.17 Excl. 20% VAT)

14 day delivery

Creality 3D Pad 5" HD touchscreen

Zoom in

Description The Creality 3D pad allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. The 5 inch HD screen has 854 x 480 ppi and has a very high sensitivity. The touchscreen is suitable for all FDM 3D printers with Marlin firmware. Thanks to the Plug and Print principle, you can easily connect the Creality 3D pad to your 3D printer.

Properties:

Print effects: create texture with one click, e.g. with 3D prints of animals
Power Loss Resume: Keeping the Design
Filament Run-out Detection: no more blank prints
11+ languages available

The Creality Pad 5" is compatible with the following printers:
CR-10S, CR-10S Pro, CR-5 Pro, CR-5 Pro H, CP-01, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-7, CR-10 V3, CR-10 V2, CR-10 Max, CR-6 SE, CR-6 Max, CR-30, CR-X Pro and the CR-200B.

Specifications

Tunnel code:	n/a	Weight:	0.295 kg
Dimensions:	133.5 x 76.2 x 13.5 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00818
Brand:	Creality3D

£56.11 (sold out) (Incl. 20% VAT)
(£46.76 Excl. 20% VAT)

Micro Swiss Bowden Dual Gear Extruder

Zoom in

Description The Micro Swiss Bowden dual drive extruder is designed as a quick and easy replacement for most Bowden-type 3D printers.

Most important features:

• Dual drive
• Hardened tool steel, CNC precision cut gears
• Adjustable filament grip
• Easy filament loading
• Excellent extrusion control
• E-steps value: 130

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DMS00121

Order now, we can ship this on Monday!

£37.06 (Incl. 20% VAT)
(£30.88 Excl. 20% VAT)

in stock

Creality 3D CR-10S Pro / CR-X | Y-axis GT2 timing belt, 89cm

Zoom in

Description This GT2 timing belt has finished ends and can be used directly on the Y axis of the Creality 3D CR-10S Pro and CR-X printers.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Length:	89 cm	Our item no:	DAR00037
Brand:	Creality3D

£5.66 (sold out) (Incl. 20% VAT)
(£4.72 Excl. 20% VAT)

Creality 3D end stop

Zoom in

Description This mechanical end stop is applicable to the Creality CR-10mini and CR-10s series

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DEL00008

Order now, we can ship this on Monday!

£4.30 (Incl. 20% VAT)
(£3.58 Excl. 20% VAT)

in stock

Creality 3D End stop (2 pieces)

Description This mechanical end stop can be used on the Creality CR-10mini and CR-10s series

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR01019

£7.50 (Incl. 20% VAT)
(£6.25 Excl. 20% VAT)

14 day delivery

Creality 3D CR-10S Pro electronics fan | 24V | 40x40x20 | axial

Zoom in

Description This small 24V DC cooling fan actively cools electronics, such as the extruder of the 3D printer. The fan has a size of 40x40x20 mm.

Specifications

Tunnel code:	n/a	Fan type:	axial
Voltage:	24 v	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00035

This product is end of life.

Creality 3D CR-10S Pro/v2 Part cooling fan | 24V | 40x40x20 | radial

Zoom in

Description Original radial cooler from 3D prints on the Creality CR-10S Pro and CR-10S Pro v2 3D printers.

Specifications

Tunnel code:	n/a	Fan type:	radial
Cable length:	60 cm	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR00039
Brand:	Creality3D

This product is end of life.

Creality 3D CR-10S Pro / CR-X Nozzle fan | 24V | 40x40x10 axial with connector

Zoom in

Description Original extruder fan for the Creality CR-10S Pro and CR-X 3D printers. This 24V fan comes with connector and is 40mm x 40mm x 10mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Length:	40 mm	Brand:	Creality3D
Width:	40 mm	Fan type:	axial
Depth:	10 mm	Hazard class:	n/a
Cable length:	58 cm	Our item no:	DAR00041

This product is end of life.

Creality 3D Hotend Thermistor 100K | 60cm cable with connector 1.8mm diameter

Zoom in

Description This Creality 3D hotend thermistor has a cable length of 60 cm and is suitable for replacing the hotend thermistor of the following Creality printer models: CR-10S Pro, CR-X and the CR-10 V2. But it can also be used for other printers that use a 100K temperature sensor.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Cable length:	60 cm	Our item no:	DAR00043
Brand:	Creality3D

Order now, we can ship this on Monday!

£7.50 (Incl. 20% VAT)
(£6.25 Excl. 20% VAT)

in stock

Creality 3D CR-10S Pro / CR-X heater cardridge with connector | 24V, 40W | 60cm

Zoom in

Description Original Creality 3D heater cartridge suitable for the CR-10S Pro and the CR-X 3D Printers.

Specifications

Tunnel code:	n/a	Cartridge diameter:	6 mm
Power rating:	40 W	Brand:	Creality3D
Voltage:	24 v	Hazard class:	n/a
Cable length:	60 cm	Our item no:	DAR00044
Cartridge length:	20 mm

£6.45 (Incl. 20% VAT)
(£5.38 Excl. 20% VAT)

14 day delivery

Creality 3D CR-10S Pro TR8X8 Z-axis leadscrew nut

Zoom in

Description Original spindle nut for the Creality CR-10S Pro 3D printer.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00048

This product is end of life.

Creality 3D CR-10S Pro Throat tube / Heatbreak M6-0.75

Zoom in

Description Original heat break for the Creality CR-10S Pro 3D printer.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00049

£5.50 (Incl. 20% VAT)
(£4.58 Excl. 20% VAT)

14 day delivery

Creality 3D CR-10S Pro Heating block for M6-0.75 nozzle

Zoom in

Description Original replacement heater block for the Creality 3D CR-10S Pro hotend.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	red	Our item no:	DAR00066
Brand:	Creality3D

£5.50 (Incl. 20% VAT)
(£4.58 Excl. 20% VAT)

14 day delivery

Creality 3D CR-10S Pro

Zoom in

Description Replacement back panel for the X-axis motor on the Creality 3D CR-10S Pro.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00068

£6.85 (Incl. 20% VAT)
(£5.71 Excl. 20% VAT)

14 day delivery

Creality 3D NEMA17 42-34 CR-10S Pro / CR-X Z-axis Active Kit

Zoom in

Description

The table bellow shows which size stepper motor that fits which axis on the different Creality 3D models:

	X-axis	Y-axis	Z-axis	extruder
CR-10 Mini	42-34	42-34	42-34	42-40
CR-10S (300)	42-40	42-40	42-34	42-40
CR-10-S4 (400)	42-40	42-60	42-34	42-40
CR-10-S5 (500)	42-40	42-60	42-34	42-40
CR-10S Pro	42-40	42-40	42-34	42-40
CR-X	42-40	42-40	42-34	42-40
CR20 Pro	42-34	42-34	42-34	42-40
Ender-3	42-34	42-34	42-34	42-40
Ender-3 Pro	42-34	42-34	42-34	42-40
Ender-5	42-34	42-40 (dual shaft)	42-34 (round shaft)	42-40

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00069
Stepper size:	Nema 17

£26.75 (Incl. 20% VAT)
(£22.29 Excl. 20% VAT)

14 day delivery

Creality CR-10S pro inductive distance sensor

Zoom in

1
0

Description This sensor can only be used on the Creality CR-10S Pro 3D printer.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00494

This product is end of life.

Creality 3D Laser module 5W | 24V

Zoom in

Description Open a world of extra possibilities by converting your 3D printer into a laser engraving machine with this Creality 3D Laser module 5 W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration you can use the focus lens and lever. Gently push this lever down to focus accurately. When you have finished focusing, you can raise the lever again for safe storage.

Other functionalities
You can engrave accurately up to 0.06 mm thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05 mm sheet of balsa wood. In addition, this laser module offers the possibility of working with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engrave and cut, or pause the current action. By using a TF card/MicroSD card you can also make beautiful creations without the 3D printer being connected to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Power rating:	5 W	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR00962

£141.00 (Incl. 20% VAT)
(£117.50 Excl. 20% VAT)

14 day delivery

Phaetus Dragonfly Hotend HIC HF

Zoom in

Description Create perfect details with the Phaetus Dragonfly Hotend HIC HF. Thanks to the High Impact Cooling technology, the heat from the hotend is optimally dissipated and the temperature remains stable. The hotend is made of hardened steel, making it wear-resistant. You can easily replace the nozzle and heat block, making maintenance and repair easy. The longer nozzle allows you to print even and smooth prints. The thin wall thickness of 0.25mm ensures good heat insulation and prevents filament clogging.

Specifications

Tunnel code:	n/a	Colour:	black
Dimensions:	26 x 21 x 57.5 mm	Brand:	Phaetus
Max operating temp:	350 °C	Weight:	0.07 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR00973

£64.80 (Incl. 20% VAT)
(£54.00 Excl. 20% VAT)

14 day delivery

Creality 3D PEI bonding platform kit 320 x 310 x 2 mm

Zoom in

Description This magnetic PEI bonding platform kit from Creality is suitable for the following Creality printers:

CR-10S PRO
CR-10S PRO V2
CR-10 V2
CR-10 V3

CR-X
CR-X Pro
Ender-3 Max

Use this set to replace your current bonding platform or as an additional build plate to continue printing quickly after your print is finished.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	320 x 310 x 2 mm	Our item no:	DAR01102
Brand:	Creality3D

£36.50 (sold out) (Incl. 20% VAT)
(£30.42 Excl. 20% VAT)

123-3D flexible magnetic PEI bed 320 x 310

Zoom in

Description This 320 x 310 flexible, magnetic PEI bed from 123-3D is a perfect upgrade for your 3D printer. You can also use this as an extra building plate to quickly continue with your next print. This PEI bed is suitable for the following Creality printers:

CR-10S PRO
CR-10S PRO V2
CR-10 V2
CR-10 V3

CR-X
CR-X Pro
Ender-3 Max

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	310 x 320 x 0.6 mm	Our item no:	DAR01127
Brand:	123-3D

Order now, we can ship this on Monday!

£36.50 (Incl. 20% VAT)
(£30.42 Excl. 20% VAT)

in stock

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card)

Zoom in

3
2
1
0

Description Increase your 3D printing fun with the Creality WiFi box 2.0 from Creality 3D. By connecting to this you can control your 3D printer remotely in real time and monitor the status of your print via the Creality Cloud app. The box can be configured quickly and easily via Bluetooth. Finally, the printing history of the WiFi box can be uploaded to the cloud with just one click.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	90 x 64 x 20 mm	USB version:	USB 2.0
Material:	ABS	Network:	work ethernet WiFi
Current consumption:	2.4 A	Standard bluetooth connection:	4.0
Colour:	black	Hazard class:	n/a
Voltage:	5 v	Our item no:	DAR01274

£36.50 (Incl. 20% VAT)
(£30.42 Excl. 20% VAT)

14 day delivery

Creality 3D CR-X (Pro) / CR-10S Pro (v2) Heatbed

Zoom in

Description Original replacement heated bed for Creality's CR-X (Pro) and CR-10S Pro (v2) 3D printers.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Power rating:	220 W	Brand:	Creality3D
Length:	320 mm	Hazard class:	n/a
Thickness:	3 mm	Our item no:	DME00141
Width:	310 mm

£49.80 (Incl. 20% VAT)
(£41.50 Excl. 20% VAT)

14 day delivery

Creality 3D CR-X Passive y-axis pulley

Zoom in

Description Original idler pulley for the Y-axis of the Creality CR-X and CR-10S Pro 3D printers.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DME00148

This product is end of life.

Creality 3D Upgraded Red Metal Extruder Clip for CR-10 Max

Zoom in

Description New version of the extruder clip/bracket for the CR-10 Max / CR-10S Pro 3D Printer

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	red	Our item no:	DRO00063
Brand:	Creality3D

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

14 day delivery

Creality 3D 12/24V hot bed module for the CR-10 series

Zoom in

Description Creality 3D Mosfet spare part

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DRW00031

This product is end of life.

Creality 3D CR-10S Pro / CR-X Touchscreen board

Zoom in

Description Original touchscreen for the Creality CR-10S Pro and CR-X 3D printers

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DRW00044

£44.50 (Incl. 20% VAT)
(£37.08 Excl. 20% VAT)

14 day delivery

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

14 day delivery

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this on Monday!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Creality 3D CR-10S Pro

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Creality 3D CR-10S Pro