Bambu Lab P1S Filament printers Printing technique 3D printers 123-3D flexible PEO & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Bambu Lab AMS - Automatic Material System

BambuLab Bambu Lab AMS - Automatic Material System SA001 DAR01228

Description Open a world of new, creative possibilities with Bambu Lab AMS. This makes it possible to print with different colors and materials. This allows you to easily print supports from fragile or soluble material, so you have to spend less time on post-processing.

Intelligent system
The AMS uses an intelligent system including a 32-bit MCU and a smart algorithm. It detects when the filament runs out and has a filament backup system. This system ensures a smooth transition to a new spool, allowing the 3D printer to continue printing undisturbed. This way you can print much easier and more efficiently and no unused filament remains on the spool.

The AMS also detects whether the filament has become tangled. At that point it will stop printing so you can solve the problem. By using Bambu Lab filaments, the AMS can identify which rolls of filament you have added. For filaments that are not from Bambu Lab, it is necessary to manually enter which filaments they are in Bambu Studio.

Always dry
filament The housing is airtight and absorbs moisture by means of a desiccant. A humidity sensor monitors the humidity in the AMS and gives you a signal when it is too high or when the desiccant needs to be replaced. This keeps your filament dry and always in optimal condition for good prints.

Up to 16 colours
If you want to print with more than 4 different materials or colors, you can do this by connecting multiple AMS. By using an AMS hub, you can print up to 16 colors and different filaments at the same time. Please note: you do not receive this hub as standard.

Specifications

Tunnel code:	n/a	Weight:	2.5 kg
Dimensions:	368 x 283 x 224 mm	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR01228
Brand:	-

This product can be ordered 1 time(s).

£340.00 (sold out) (Incl. 20% VAT)
(£283.33 Excl. 20% VAT)

123-3D flexible PEO & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers

123-3D flexible PEO & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers DAR01380

2
1
0

Description

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	256 x 256 mm	Our item no:	DAR01380
Brand:	123-3D

£24.50 (Incl. 20% VAT)
(£20.42 Excl. 20% VAT)

14 day delivery

123-3D flexible PEY & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers

123-3D flexible PEY & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers DAR01382

2
1
0

Description

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	256 x 256 mm	Our item no:	DAR01382
Brand:	123-3D

£24.50 (Incl. 20% VAT)
(£20.42 Excl. 20% VAT)

14 day delivery

123-3D flexible PET & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers

123-3D flexible PET & PEI printed circuit board 256 x 256 for Bambu Lab 3D Printers DAR01381

2
1
0

Description

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	256 x 256 mm	Our item no:	DAR01381
Brand:	123-3D

£24.50 (Incl. 20% VAT)
(£20.42 Excl. 20% VAT)

14 day delivery

BigTreeTech Panda Touch V1.0

BigTreeTech Panda Touch V1.0 1060000661 DAR01614

3
2
1
0

Description The Panda Touch V1.0 is a 5 inch touchscreen from Bigtreetech that can be used as an alternative or replacement for the current screen of the Bambu P1P and the Bambu P1S. It is even possible to control up to 10 Bambu Lab printers with the Panda Touch V1.0. This screen is compatible with the Bambu Lab X1, P1 and A1 series.

Easy installation & use
The Panda Touch is easy and hassle-free to install, so you can get started right away. The user-friendly UI and useful features make this an ideal screen. Connects easily to 2.4G WiFi and charges effortlessly thanks to the built-in battery that allows you to charge magnetically. The Panda Touch comes with a magnetic USB dock, specially made for the P1 series 3D printers from Bambu Lab. With just one click you can access and control your AMS. This allows you to easily see the colors and filament types now loaded into your AMS. It is also possible to set the type or color manually, just like on the X1C interface. You can print from the printer memory card or via a USB stick.

Specifications

Brand:

BIGTREETECH

£86.50 (Incl. 20% VAT)
(£72.08 Excl. 20% VAT)

14 day delivery

BigTreeTech Panda Revo P1 Hotend

BigTreeTech Panda Revo P1 Hotend 1060000654 DAR01615

2
1
0

Description This Panda Revo P1 hotend can be replaced in just 30 seconds without tools, so you can quickly continue making your next 3D print. The 0.4 mm Revo High Flow nozzle and the 60 W HeaterCore ensure a flow rate of up to 40 mm³/s. Easily print at high temperatures of up to 300 °C. This allows you to print with many different types of filament, including PLA, PETG, ABS, TPU, HIPS and Nylon. The Panda Revo is suitable for the Bambu Lab P1P and P1S. In addition, it is compatible with the RapidChange Revo Standard, ObXidian and High Flow nozzles.

Please note: this hotend is NOT compatible with the Revo belt nozzle.

Specifications

Brand:

BIGTREETECH

£138.00 (Incl. 20% VAT)
(£115.00 Excl. 20% VAT)

14 day delivery

Modefine 3D High temp gold PEI build plate for X1, P1, A1 series

Modefine3D Modefine 3D High temp gold PEI build plate for X1, P1, A1 series M20003892002 DAR01641

Description This gold PEI building board is textured on both sides for better first layer adhesion. This means that 3D prints stay in place better during printing and you do not have to use adhesives for all materials. When the plate has cooled, prints can be easily removed. You can also bend the plate slightly to release the model. The building board can be used for different filaments such as PLA, TPU and PC, or for materials that require a high temperature such as ABS and Nylon. This printed circuit board is suitable for the X1, P1 and A1 series of Bambu Lab.

Specifications

Tunnel code:	n/a	Weight:	0.276 kg
Dimensions:	256 x 256 x 0.575 mm	Hazard class:	n/a
Brand:	-

£19.80 (Incl. 20% VAT)
(£16.50 Excl. 20% VAT)

14 day delivery

Modefine 3D High temp black PEI build plate for X1, P1, A1 series

Modefine3D Modefine 3D High temp black PEI build plate for X1, P1, A1 series M20003892002B DAR01643

Description With this black, textured PEI building board you are assured of good first layer adhesion. This ensures that your 3D prints remain in place during printing and an adhesive does not always have to be used. Prints can be easily removed after the plate has cooled. The build plate can be used with PLA, TPU and PETG, or with materials such as ABS and Nylon, which require a higher temperature. This printed circuit board is suitable for the X1, P1 and A1 series of Bambu Lab.

Specifications

Tunnel code:	n/a	Weight:	0.28 kg
Dimensions:	256 x 256 x 0.575 mm	Hazard class:	n/a
Brand:	-

£19.95 (Incl. 20% VAT)
(£16.63 Excl. 20% VAT)

14 day delivery

Modefine 3D M2 hotend for P1series (ceramic heater+Thermistor)

Modefine3D Modefine 3D M2 hotend for P1series (ceramic heater+Thermistor) M30000830004 DAR01647

Description This all-metal M2 hotend contains a ceramic heater and thermistor. It has an improved nozzle structure, where the heating block and nozzle are connected with a screw thread. This means there is less chance of material leaking during printing. The nozzle is made of SKD11 hardened steel, which means this hotend can handle a temperature of up to 320 ˚C. Because the radiator and the heating block are connected by two screws, there is less chance of problems during 3D printing at high speed. Finally, there is better heat conduction thanks to the use of a nickel-plated chromium zirconium and copper alloy. This hotend is suitable for the P1 series 3D printers from Bambu Lab.

Specifications

Tunnel code:	n/a	Weight:	0.036 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Printer extruder max temp:	320 °C
Brand:	-

£16.50 (Incl. 20% VAT)
(£13.75 Excl. 20% VAT)

14 day delivery

Modefine 3D Hardening Nozzle 0.4mm

Modefine3D Modefine 3D Hardening Nozzle 0.4mm M40999315003-0.4 DAR01652

Description This 0.4 mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Tunnel code:	n/a	Brand:	-
Max temp:	400 °C	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm

£4.95 (Incl. 20% VAT)
(£4.13 Excl. 20% VAT)

14 day delivery

Modefine 3D Hardening Nozzle 0.6mm

Modefine3D Modefine 3D Hardening Nozzle 0.6mm M40999315003-0.6 DAR01653

Description This 0.6 mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Tunnel code:	n/a	Brand:	-
Max temp:	400 °C	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.6 mm

£4.95 (Incl. 20% VAT)
(£4.13 Excl. 20% VAT)

14 day delivery

Modefine 3D Hardening Nozzle 0.8mm

Modefine3D Modefine 3D Hardening Nozzle 0.8mm M40999315003-0.8 DAR01654

Description This 0.8 mm hardened steel nozzle is wear-resistant and can therefore be used with materials that contain extra particles, such as carbon. Easily print at temperatures up to 400 ˚C with this nozzle. The design has copper on the inside and three holes for a high flow rate and increased printing speed.

Specifications

Tunnel code:	n/a	Brand:	-
Max temp:	400 °C	Weight:	0.03 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm

£4.95 (Incl. 20% VAT)
(£4.13 Excl. 20% VAT)

14 day delivery

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

123-3D 3D Printer starter/finishing/maintenance kit DGS00122

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

14 day delivery

Steelmans 3dB noise reduction feet pads

Steelmans3D Steelmans 3dB noise reduction feet pads 3DB-V1 DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this today!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

© 2024 - 123-3d.co.uk