New Printers 3D printers Flsun S1 Delta 3D printer 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

£6.29

Home
3D printers
New Printers

Flsun S1 Delta 3D printer

Zoom in

Description The Flsun S1 3D printer is designed to print ultra-high speed at a speed of up to 1200 mm/s. The acceleration of 40000 mm/s² and the maximum flow rate of 110 mm³/s help this printer to achieve this speed. To ensure stable, fast printing, the frame is made entirely of metal. The printer is supported by AI, so you can always print worry-free. Easily make prints from PLA, PETG, ABS and more.

High quality prints
The printer has a closed-loop motor, with which unparalleled precision can be achieved. To achieve even tighter layer lines, the Flsun S1 is equipped with vibration compensation. The filament dryer box keeps your filament dry, while at the same time monitoring the humidity and quality of the filament. This keeps the filament in optimal condition for high-quality prints.

AI
The Flsun S1 is supported by AI to achieve even better results. The Lidar detection system ensures accurate calibration and precise auto-bed leveling. This way you are always assured of the perfect first layer. The filament detection accurately monitors the status of the filament to prevent blockages. The camera also uses AI to detect in time when something is wrong, making problems such as filament spaghetti a thing of the past. In addition, the camera ensures that you can monitor the print in real time and that timelapses can be made.

Useful functions
The screen automatically goes into sleep mode when it has not been used for a while and the printer automatically turns off when it has not detected any activity for a long time. The air filter ensures that no harmful substances enter the air. The printer uses the trusted Flsun operating system and has a status indicator light, with which the status of the print can be monitored.

Other functionalities
The construction volume is 320 x 430 mm and smart zone heating has been used, so that the entire print bed is not heated immediately. The inner ring has a diameter of 220 mm, the outer ring has a diameter of 220 – 320 mm. The maximum temperature of the print bed is 120 ℃. The dual gear direct drive extruder is ultra lightweight with an 80W ceramic heat element and has a high flow hot end design. The CPAP turbofan has an rpm of 40,000, making the minimum cooldown for one layer just one second.

Specifications

Tunnel code:	n/a	Max print depth:	32 cm
Dimensions:	550 x 595 x 1,030 mm	Max print width:	32 cm
Input voltage:	110-240V	Max print height:	43 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	120 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Flsun	Has laser option:	no
Weight:	39 kg	3D print option:	yes
Network:	work ethernet WiFi	Filament sensor:	yes
Heated bed included:	yes	Printer extruder:	Direct
Camera included:	yes	Max print volume:	34.582
Printing technique:	TFDM FFF	Our item no:	DKI00218
Hazard class:	n/a	Printer extruder max temp:	350 °C
Printer has USB:	yes	Printer voltage:	24 v/°c

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£1,020.00 (Incl. 20% VAT)
(£850.00 Excl. 20% VAT)

in stock

Flsun T1 Delta 3D printer

Zoom in

Description The Flsun T1 is an ultra-high speed 3D printer with a maximum speed of no less than 1000 mm/s. The acceleration of 30000 mm/s² and the maximum flow rate of 90 mm³/s help this printer to achieve this speed. The frame is made entirely of metal to ensure stable printing at this speed. This super-fast printer has a powerful stepper motor with unparalleled precision and a CPAP turbofan provides cooling at 30,000 rpm. Easily print PLA, PETG, ABS and more thanks to the closed housing.

Smart assisted system
This printer uses a smart-assisted system, allowing you to make excellent quality prints. For example, the auto-bed leveling and vibration compensation ensure that the layer lines of your project can be printed perfectly. The power loss function makes it possible to resume your print after a power failure, without your print failing or having to start over. The filament detection closely monitors the status of the filament and stops the print if a problem is detected.

Useful functions
The Flsun T1 is equipped with a HEPA and carbon filter, which filters the air as best as possible. In addition, the printer automatically goes into sleep mode when it has not been used for a while and the printer will automatically stop heating once the print is finished. The built-in camera is ideal for monitoring your print in real time or for making timelapses.

Other functionalities
The construction volume is 260 x 330 mm and the maximum bed temperature is 110 ℃. The dual gear direct drive extruder is ultra-lightweight and has a nozzle that can handle a maximum of 300 ℃. Finally, this printer works with the familiar Flsun OS.

Specifications

Tunnel code:	n/a	Max print depth:	26 cm
Dimensions:	436 x 490 x 836 mm	Max print width:	26 cm
Input voltage:	110-240V	Max print height:	33 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	110 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Flsun	Has laser option:	no
Weight:	16.8 kg	3D print option:	yes
Network:	work ethernet WiFi	Filament sensor:	yes
Heated bed included:	yes	Printer extruder:	Direct
Camera included:	yes	Max print volume:	17.52
Printing technique:	TFDM FFF	Our item no:	DKI00219
Hazard class:	n/a	Printer extruder max temp:	300 °C
Printer has USB:	yes	Printer voltage:	24 v/°c

Please note: This is a great high-speed, delta printer, however we do not recommend this for beginners.
This machine took our expert 2 hours to assemble for the first time. If you have any questions about it's suitability for your needs, please submit a ticket to contact us

Order now, we can ship this on Monday!

£461.00 (Incl. 20% VAT)
(£384.17 Excl. 20% VAT)

in stock

Creality 3D Ender 3 V3 Plus 3D printer

Zoom in

Description Bring your creative ideas to life with the Ender 3 V3 Plus 3D printer from Creality. With the large construction volume of 300 x 300 x 330 mm you can print life-size objects in one go or print several small objects in one go. It is also possible to print up to 600 mm/s with the CoreXZ system. You can easily assemble the printer, making it easy to use even for novice users. Thanks to the automatic calibration, your build plate is always perfectly level, without having to put in any extra effort yourself.

Powerful and stable performance
The Ender 3 V3 Plus delivers fantastic performance due to its reliable and robust clog-free extruder. The printer has a simple quick swap tri-metal nozzle, so you can change it easily and quickly. In addition, the 60W hotend heater ensures smooth extrusion at full power. The part cooling fans at the front and back cool the newly printed part quickly and evenly, making dripping and deformation a thing of the past. Thanks to the two powerful motors on the y-axis, the print bed is moved quickly and stably, even when larger and heavier 3D prints are made. The z-axis has 2 supporting beams on the side, making it less vibrating and very accurate. Easily print different materials such as PLA, ABS, PETG, PLA-CF and the flexible TPU (95A).

User friendly
The new metal design is very stable and takes up significantly less space than other printers with the same build volume. This makes this printer a perfect fit for almost any setup. The Ender 3 V3 Plus has two different speed modes, including a silent mode with a noise level of ≤55 decibels. The handy 800 x 480 px touchscreen shows you all the information you need, such as a preview of the model and its progress. The flexible, textured build plate ensures that 3D models remain securely in place during printing and can be easily removed afterwards. Finally, you can easily connect the printer to a LAN connection or WiFi.

Specifications

Tunnel code:	n/a	Printer has USB:	yes
Dimensions:	410 x 445 x 577 mm	Max print depth:	30 cm
Power rating:	350 W	Max print width:	30 cm
Input voltage:	100-240V	Max print height:	30 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	100 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Creality3D	Has laser option:	no
Weight:	11.5 kg	3D print option:	yes
Nozzle type:	-	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	27
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

Order now, we can ship this on Monday!

£339.00 (Incl. 20% VAT)
(£282.50 Excl. 20% VAT)

in stock

Elegoo Saturn 4 3D printer

Zoom in

Description Make accurate prints with the Saturn 4 resin 3D printer from Elegoo. This 3D printer has a build volume of no less than 218.88 x 122.88 x 220 mm and has a 3.5 inch 12K mono LCD screen. This screen has a resolution of 11520 x 5120 and an XY resolution of 19 x 24 µm, which allows it to show excellent details. This 3D printer is very user-friendly and therefore suitable for both beginners and advanced users.

User friendly
The printer is ready to use right out of the box. Just make sure the printer has power and you're ready to go. With one push of a button, the Saturn 4 will do a quick self-check, so you can be sure everything is working properly before you turn on your prints. In addition, you can easily let the printer level automatically, saving you time and effort. The advanced cooling system ensures even better 3D prints, because the layers are cooled at the right time. The classic design of this 3D printer is also very user-friendly. Thanks to the quick release build plate, the drainer and the flip-up lid, it is even easier to use this printer.

Mechanical sensor
The Saturn 4 is equipped with a mechanical sensor that can detect various problems. For example, this sensor gives a timely warning when it notices that there is not enough resin in the barrel, so that you can refill it. In addition, the sensor can detect whether there is residue left behind, which can prevent possible damage to the LCD screen. Finally, the sensor can sense whether the automatic bed leveling has gone well. The temperature detection ensures that printing is stopped when the temperature is too high.

Other functionalities
The printer uses a COB (chip-on-board) light source and collimating fresnel lens to produce sharp prints. In addition, the Saturn 4 is equipped with a PFA release film, a glass screen protector and a laser-engraved build plate. It is also compatible with the Mars Mate air purifier.

DKI00261

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	32.74 x 32.92 x 54.8 cm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	12.28 cm
Brand:	ELEGOO	Max print width:	21.88 cm
Weight:	13.5 kg	Max print height:	22 cm
UV wavelength:	405 nm	Printer bed levelling:	manual
Light source:	UV LCD	Has CNC option:	no
Wave length:	405 nm	Has laser option:	no
Network:	no	3D print option:	yes
Heated bed included:	no	Filament sensor:	no
Camera included:	no	Max print volume:	5.911
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

£266.99 (sold out) (Incl. 20% VAT)
(£222.49 Excl. 20% VAT)

Elegoo Saturn 4 Ultra 3D printer

Zoom in

Description Conjure up new 3D prints in unprecedented detail at lightning speed with the Saturn 4 Ultra resin 3D printer from Elegoo. Its 10-inch 12K mono LCD display boasts an incredible 11520 x 5120 resolution and an XY resolution of 19 x 24 µm, ensuring that no detail is lost. With a build volume of 218.88 x 122.88 x 220 mm, you can batch print multiple small prints or 3D print one large print in one go. The Saturn 4 Ultra is a plug-and-play printer, meaning you can use it right out of the box.

AI & Tilt Technology
This 3D printer uses the intelligent AI camera detection which can monitor the print status in real-time and detect problems. The camera can detect when the print starts to deform and when the build plate is empty. This allows you to take quick action, which reduces resin waste and ensures high-quality prints. It is also possible to make time-lapse videos with this camera. The tilting technology quickly tilts the resin barrel back and forth, pulling the model off the release film and the printing speed can reach up to 150mm/h.

User friendly
The classic and user-friendly design makes this an ideal printer for both beginners and advanced users. Enjoy convenience and make use of the quick-release build plate, reliable drain tray and the lid that opens upwards. In addition, the automatic bed leveling and smart self-check make it even easier to get started with this 3D printer. The two print modes 'fast' and 'slow' ensure that every project can be printed at the right speed for achieving the best results. The Elegoo Saturn 4 Ultra uses a self-designed system with 8G RAM, which makes file transfers fast and stable. It is also very easy to connect and control multiple printers with 1 device.

Mechanical sensor
Thanks to the intelligent mechanical sensor, leftover residue can be easily detected. The sensor also keeps track of when there is a shortage of resin, so you can refill it in time, and when leveling has not gone well. For extra safety, the Saturn 4 Ultra is equipped with high temperature protection. When the LED temperature is higher than the set temperature, the temperature alarm will go off and the printer will stop. You can also easily resume printing after a power failure.

Other functionalities
The printer uses a COB (chip-on-board) light source and collimating fresnel lens to produce sharp prints. In addition, the Saturn 4 Ultra is equipped with a PFA release film, a glass screen protector and a laser-engraved build plate. It is also compatible with the Mars Mate air purifier.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	32.74 x 32.92 x 54.8 cm	Printer has USB:	yes
Input voltage:	100-240V	Max print depth:	12.28 cm
Brand:	ELEGOO	Max print width:	21.88 cm
Weight:	14.5 kg	Max print height:	22 cm
UV wavelength:	405 nm	Printer bed levelling:	automatic
Light source:	UV LCD	Has CNC option:	no
Wave length:	405 nm	Has laser option:	no
Network:	WiFi	3D print option:	yes
Heated bed included:	no	Filament sensor:	no
Camera included:	yes	Max print volume:	5.911
Printing technique:	SLA DLP	Printer voltage:	24 v/°c

Order now, we can ship this on Monday!

£353.99 (Incl. 20% VAT)
(£294.99 Excl. 20% VAT)

in stock

Anycubic Kobra 3 (combo) 3D Printer with ACE Pro System New

Anycubic3D Anycubic Kobra 3 (combo) 3D Printer with ACE Pro System DKI00263

Zoom in

Description Anycubic Kobra 3 3D Printer with ACE Pro multi-filament system for multi colour printing.

Bring the most colorful 3D prints to life with the Anycubic Kobra 3 Combo. This 3D printer comes with an Anycubic Color Engine Pro, allowing you to 3D print with up to 4 colors or types of filament at the same time. The Anycubic Color Engine Pro will automatically switch between colors or spools, allowing you to also use two spools of the same color as a backup for each other.

Intelligent
The smart algorithm helps the Anycubic Color Engine Pro load the right filament within a minute. To prevent the filament from becoming tangled, it is guided through 4 different tubes to the extruder. There is also a constant check to see whether the filament has run out. If this is the case, the screen will provide a real-time reminder, so there is less chance of your print failing. In addition, the algorithm measures the pressure in the nozzle for smooth extrusion, layer by layer. With just the push of a button you can use the vibration compensation. This will make your prints much smoother. The Kobra 3 Combo can also easily resume printing after a power failure or running out of filament.

User friendly
This 3D printer is very easy to set up and is suitable for both beginners and advanced users. Use the automatic bed leveling to always have a perfectly level print bed. You can easily operate the printer with the touchscreen, which you can also rotate 30˚ to 60˚ for extra comfort. The nozzle goes up to 300˚ C, making it suitable for many different types of filaments. In addition, it can be replaced easily and without tools. The 32 bit MCU has a silence sensor to reduce noise to a maximum of 50 dB. This means you will not be bothered by noise pollution during printing.

Other functionalities
The Kobra 3 has a sturdy frame that is suitable for long-term stable printing, even at high speeds. The stylish design ensures that this printer fits well in almost any interior. With a construction volume of no less than 250 x 250 x 260 mm and a maximum printing speed of 600 mm/s, you can easily make 3D prints of different sizes. The cooling fan spins up to 7,000 rpm, so your 3D models are cooled quickly. The filament can be dried during 3D printing, so it is always in optimal condition for printing. In addition, the filament is also kept dry when you are not printing. Finally, you can easily control your 3D printer via the Anycubic app ( Android & iOS )

Specifications

Tunnel code:	n/a	Printer has USB:	yes
Dimensions:	505 x 453 x 483 mm	Max print depth:	25 cm
Power rating:	400 W	Max print width:	25 cm
Input voltage:	100-240V	Max print height:	26 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	100 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Anycubic	Has laser option:	no
Weight:	13.8 kg	3D print option:	yes
Network:	WiFi	Filament sensor:	yes
Heated bed included:	yes	Printer extruder:	Direct
Camera included:	no	Max print volume:	16.25
Printing technique:	TFDM FFF	Printer extruder max temp:	300 °C
Hazard class:	n/a	Printer voltage:	24 v/°c

*Filament not included

Order now, we can ship this on Monday!

£346.00 (Incl. 20% VAT)
(£288.33 Excl. 20% VAT)

in stock

Anycubic Kobra 3 Max Combo 3D printer

Zoom in

Description Unleash your creativity with the Anycubic Kobra 3 Max. This large 3D printer has a build volume of no less than 420 x 420 x 500 mm, making it easy to print even large 3D prints in one go. This allows you to easily create multiple models in the same batch, saving both time and filament and making it ideal for mass production. With a maximum speed of 600 mm/s and an acceleration of 10000 mm/s², you never have to wait long for your 3D prints to be ready. This combo also comes with an Ace Pro multi-material system.

Ace Pro
Thanks to the Ace Pro, you can 3D print with 4 colors or materials at the same time. By connecting an extra unit, this number can even be increased to 8. Changing spools will be fully automatic, allowing you to spend time on other things. The intelligent drying function of the Ace Pro makes it possible to dry filament, both before and during printing. This will make your 3D prints of even higher quality. In addition, the Ace Pro can automatically switch to a new spool of the same color when the old one is empty and the printing is paused when blockages or filament tangles are detected.

User friendly
The LeviQ 3.0 automatic leveling system always ensures the perfect first layer. The belt tension is controlled semi-automatically, which prevents step loss and provides better stability when printing large multicolor 3D prints. Use the resonance compensation and active extrusion flow control to achieve even better results. In addition, the 'resume printing' function ensures that you can resume your 3D print after a power failure, so that it does not fail.

In just 125 seconds, the 800 W AC heated bed can be heated evenly to 60 ˚ C. The hotend can heat up to a temperature of 300 ˚ C, which means that you can print not only with filaments such as PLA and PETG, but also with materials such as TPU. You can easily change the nozzle thanks to the lever, so you can quickly continue with your next 3D printing project.

Other functionalities
This 3D printer has a spring steel build plate with PEI coating and a 4.3 inch touchscreen. You can use the Anycubic Slicer Next or another slicer. The Anycubic Next Slicer has various presets that make slicing even easier. In addition, it is compatible with file formats such as 3mf, stl, step, svg, obj, amf, ply and more. You can also use the Anycubic app, with which you can remotely monitor your print process.

Specifications

Tunnel code:	n/a	Printer has USB:	yes
Dimensions:	706 x 640 x 753 mm	Max print depth:	42 cm
Power rating:	300 W	Max print width:	42 cm
Input voltage:	100-240V	Max print height:	50 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	90 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Anycubic	Has laser option:	no
Weight:	23.6 kg	3D print option:	yes
Max print speed:	600 mm/s	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	88.2
Camera included:	no	Printer extruder max temp:	300 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

£659.00 (sold out) (Incl. 20% VAT)
(£549.17 Excl. 20% VAT)

Anycubic Kobra S1 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600 mm/s, you can create interesting projects in no time. In addition, this 3D printer has handy functions that make it even easier for you.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320 ˚ C full metal hotend, a 120 ˚ C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50 W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic leveling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odors.

Other functionalities
The 4.3 inch touchscreen has an intuitive UI, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Tunnel code:	n/a	Printer has USB:	yes
Dimensions:	400 x 410 x 490 mm	Max print depth:	25 cm
Power rating:	1,500 W	Max print width:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	120 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Anycubic	Has laser option:	no
Weight:	15.5 kg	3D print option:	yes
Max print speed:	600 mm/s	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	15.625
Camera included:	yes	Printer extruder max temp:	320 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

£424.00 (sold out) (Incl. 20% VAT)
(£353.33 Excl. 20% VAT)

Anycubic Kobra S1 Combo 3D printer

Zoom in

Description Make 3D prints at high speed with the Kobra S1 3D printer from Anycubic. With a maximum print speed of 600 mm/s, you can create interesting projects in no time. In addition, this 3D printer has handy functions that make it even easier for you. With this combo you also immediately receive the Ace Pro multi-material system.

Ace Pro
The Ace Pro allows you to use up to 4 colors or materials in one print. This allows you to easily create colorful 3D prints or prints with multiple materials. By connecting multiple Ace Pro units, you can even increase this number to 8 colors or materials. This unit also actively dries the filament during 3D printing, giving you the hightest quality 3D prints.

Good performance
This 3D printer is made of high quality materials and is easy to use. Because this 3D printer comes with a 320 ˚ C full metal hotend, a 120 ˚ C heatbed and a closed housing, materials such as ABS and ASA can also be printed easily. The combination of the CoreXY construction, the 50 W hotend, heater, Kobra OS and the powerful cooling fan support 3D printing at high speed.

Useful features
For improved quality of your 3D prints, you can use vibration compensation and flow calibration. This will print the layer lines tighter and give you perfect 3D prints. The Kobra S1 is equipped with LeviQ 3.0 automatic levelling and a quick release hotend for extra convenience. The Kobra S1 also uses AI to detect filament breakage, tangling and clogging. In addition, it is possible to resume your 3D print after a power failure. This way you do not have to restart your 3D print. For extra ease of use, this 3D printer works with a decibel level of ≤ 48 dB and there are carbon filters to reduce unpleasant odours.

Other functionalities
The 4.3 inch touchscreen has an intuitive user interface, making it easy to use. The silent print mode has a maximum noise level of 44 decibels. This also makes this 3D printer suitable for use in areas where you do not want noise pollution. You can use the Anycubic Kobra S1 with the Anycubic app, which allows you to remotely monitor your 3D printing process, create time lapse videos and control the 3D printer remotely.

Specifications

Tunnel code:	n/a	Printer has USB:	yes
Dimensions:	400 x 410 x 490 mm	Max print depth:	25 cm
Power rating:	1,500 W	Max print width:	25 cm
Input voltage:	110-220V	Max print height:	25 cm
Filament diameter:	1.75 mm	Printer bed levelling:	automatic
Nozzle diameter:	0.4 mm	Heatbed max temp:	120 °C
Printer no of extruders:	1	Has CNC option:	no
Brand:	Anycubic	Has laser option:	no
Weight:	15.5 kg	3D print option:	yes
Max print speed:	600 mm/s	Filament sensor:	yes
Network:	WiFi	Printer extruder:	Direct
Heated bed included:	yes	Max print volume:	15.625
Camera included:	yes	Printer extruder max temp:	320 °C
Printing technique:	TFDM FFF	Printer voltage:	24 v/°c
Hazard class:	n/a

£549.00 (sold out) (Incl. 20% VAT)
(£457.50 Excl. 20% VAT)

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this on Monday!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

14 day delivery

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this on Monday!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

New Printers

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

New Printers