Geeetech A20T 3 Colour Mixing

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

GEEETECH MK8 brass nozzle, 2.0mm x 0.4mm

Description Use the MK8 brass nozzle 2.0mm x 0.4mm for your Geeetech A30/T, A10M/T and A20M/T 3D printers. Thanks to the 0.4 mm precision of the nozzle, you can print high-quality prints. The nozzle is made of brass and is suitable for 1.75mm filament.

Specifications

Tunnel code:	n/a	Brand:	Geeetech
Material:	brass	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR00669
Screwthread type:	M6

Order now, we can ship this today!

£5.50 (Incl. 20% VAT)
(£4.58 Excl. 20% VAT)

in stock

GEEETECH GT2560 v4.0 Mainboard for A20 series Printers

Zoom in

Description

The GEEETECH mainboard is easy to assemble and operate. It is equipped with an ATMEGA2560 chip, is compatible with an input voltage of 12V/24V and comes with an interface for the heatbed. In addition, the mainboard is equipped with two interfaces for fans and one interface for LED light. It is powered by an A4988 single or multiple extruder stepper motor driver. You can expand the board with an LCD screen and an SD card.

Please note: GEEETECH's V4.0 board is a replacement for the original A20 series board. It cannot replace other boards such as V4.1B, V3.0, V3.1 etc.

Please note we do not offer support on the installation of this product.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Input voltage:	12-24V	Stepper driver slots:	4
Brand:	Geeetech	Our item no:	DAR00459

Order now, we can ship this today!

£52.50 (Incl. 20% VAT)
(£43.75 Excl. 20% VAT)

in stock

GEEETECH Heatbed kit for A20(M/T) Printers

Zoom in

Description The original heatbed kit from GEEETECH is suitable for A20, A20M and A20T printers. The package contains one Superplate Glass, one aluminium heatbed, one NTC-0805 thermistor and wiring for connecting the components. The aluminium heatbed has a thickness of 1.5mm and ensures a gradual distribution of heat. The NTC-0805 thermistor works very accurately and the wiring is well insulated. The heat-resistant glass plate is made of silicon carbide and has a special coating, making it perfect as a building platform. Prints adhere better to silicon carbide and are also easier to remove. In addition, it is easier to clean the surface with water or alcohol.

Note: this heated bed is standard soldered for 24V power. Pad 2 solders to '+' and pad 3 solders to '-'. The two red wires are for '+', the middle wires are for the thermistor and the two black wires are for '-'.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR00464
Brand:	Geeetech

Order now, we can ship this today!

£38.50 (Incl. 20% VAT)
(£32.08 Excl. 20% VAT)

in stock

GEEETECH MK8 Extruder Kit 1.75mm for A10, A20 and A30 Printers

Zoom in

Description This injection moulded Geeetech MK8 Extruder Kit is an upgrade of the MK8 Extruder feeder kit. Compared to the previous version, there are some differences in the design of this new MK8 Extruder. For example, the input device uses a double 'V' design, which ensures stable and constant feeding. This design makes it easier to load the filament all the way to the end of the barrel.

The extruder kit is suitable for filament with a diameter of 1.75mm and is compatible with the A10, A20 and A30 single extruder printers. The kit cannot be used on A10M, A20M and A30M printers.

Specifications

Tunnel code:	n/a	Brand:	Geeetech
Filament diameter:	1.75 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00451

£5.75 (Incl. 20% VAT)
(£4.79 Excl. 20% VAT)

14 day delivery

GEEETECH Mylar adhesive platform sticker for A20(M/T) Printers (2-pack)

Zoom in

Description Is your adhesive platform sticker damaged? Then provide your current print surface with a new adhesive layer. The sticker is compatible with 3D printers from the A20, A20M and A20T series.

Please note: this package only contains the sticker. First remove the old sticker before applying the new one.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	260 x 260 mm	Our item no:	DAR00474
Brand:	Geeetech

£12.75 (Incl. 20% VAT)
(£10.63 Excl. 20% VAT)

14 day delivery

GEEETECH Superplate glass plate for A20(M) Printers, 260mm x 260mm x 4mm

Zoom in

Description This Geeetech glass plate for A20(M) printers is a reliable building platform. The Superplate is made of the hard material silicon carbide and coated with micropores. This gives the glass plate excellent adhesion during printing. The silicon carbide glass is wear-resistant and can withstand extreme temperatures up to 400℃. The glass plate is easy to clean with water or alcohol and prints can easily be removed by hand.

Note: the glass plate is slightly thicker than the black mylar sticker. Move the Z limit switch about 3mm if you are using this glass to replace the mylar sticker. This prevents scratching the platform.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	260 x 260 x 4 mm	Our item no:	DAR00477
Brand:	Geeetech

£23.25 (Incl. 20% VAT)
(£19.38 Excl. 20% VAT)

14 day delivery

GEEETECH Fan housing for A10, A10M, A20, A20M and A30 Pro Printers

Zoom in

Description Ventilation Enclosure for Geeetech 3D Printers

This metal sheet enclosure is specially designed to boost the ventilation performance for the whole extruder kit. Its 360° ventilation design could keep the overall temperature of the printing head to ensure smooth extrusion.

As a single component, it is easy to assemble and used for Geeetech A10, A10M, A20 and A20M 3D printers.

Specifications

Tunnel code:	n/a	Brand:	Geeetech
Dimensions:	55 x 42.5 x 51 mm	Hazard class:	n/a
Material:	metal	Our item no:	DAR00469

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

14 day delivery

GEEETECH Titan Extruder Kit 1.75mm for A10M, A10T, A20M, A20T, A30M and A30T Printers

Zoom in

Description This GEEETECH Titan extruder kit is a cold end extruder. The nozzle has a diameter of 1.75mm and is suitable for PLA, ABS and TPU filament, among others. The extruder kit is suitable for the following printers:

GEEETECH A10M
GEEETECH A10T
GEEETECH A20M
GEEETECH A20T
GEEETECH A30M
GEEETECH A30T

This extruder kit contains a NEMA17 motor with the following specifications:

1.8° per step
2.77 Volt DC nominal voltage
1.68 Amps Rated Current
≥380mNm holding torque
24mm motor shaft length
Size 42mm x 42mm x 40mm

Specifications

Tunnel code:	n/a	Brand:	Geeetech
Filament diameter:	1.75 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00453

£34.95 (Incl. 20% VAT)
(£29.13 Excl. 20% VAT)

14 day delivery

GEEETECH extruder extension board for A20, A20M, A20T, A30 Pro and A30M printers

Zoom in

Description

Upgrade your 3D printer with an extruder extension board from GEEETECH. Connects wires between the motherboard and the hotend.

It is suitable for the following GEEETECH printers:

A20M
A20T
A3 PRO
A30M
A30T

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Geeetech	Our item no:	DAR00456

£9.25 (Incl. 20% VAT)
(£7.71 Excl. 20% VAT)

14 day delivery

GEEETECH silicone sock for the A10T / A20T / A30T

Zoom in

Description Keep your hotend clean and insulated with this Geeetech silicone sock. Using the sock will reduce heat loss and improve print quality, especially when using a cooling fan.

Specifications

Tunnel code:	n/a	Brand:	Geeetech
Material:	silicon	Hazard class:	n/a
Colour:	black	Our item no:	DAR00777

Order now, we can ship this today!

£3.91 (Incl. 20% VAT)
(£3.26 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Zoom in

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Tunnel code:	n/a	Weight:	0.01 kg
Cable length:	15 cm	Manual:	Download
Brand:	ANTCLABS	Hazard class:	n/a
Voltage VDC:	5 v/°c	Our item no:	DAR00016

Order now, we can ship this today!

£29.60 (Incl. 20% VAT)
(£24.67 Excl. 20% VAT)

in stock

Capricorn TL Creality 3D kit transparent including pneufit couplings and cutter, 1m

Zoom in

Description The Capricorn TL Creality Kit is specially composed for the Creality 3D printers (CR-10, CR-10S, Ender-3, Ender-3 Pro).

This kit contains the following parts:

1 Metre 1.75mm Fluorescent PTFE Tubing
PC4-M6 Extruder Pneufit for Creality
PC4-M10 Hotend Pneufit for Creality
Premium Ultra-Sharp PTFE Cutter

Specifications

Tunnel code:	n/a	Brand:	Capricorn
Material:	PTFE	Inner diameter:	2 mm
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Colour:	transparent blue	Hazard class:	n/a
Length:	1 m	Our item no:	DBW00052

Order now, we can ship this today!

£25.95 (Incl. 20% VAT)
(£21.63 Excl. 20% VAT)

in stock

Capricorn XS Creality 3D kit including pneufit couplings and cutter, 1m

Zoom in

Description The Capricorn XS Creality Kit is specially composed for the Creality 3D printers (CR-10, CR-10S, Ender-3, Ender-3 Pro).

The kit contains the following parts:

1 Metre 1.75mm XS PTFE Tubing
PC4-M6 Extruder Pneufit for Creality
PC4-M10 Hotend Pneufit for Creality
Premium Ultra-Sharp PTFE Cutter

Specifications

Tunnel code:	n/a	Brand:	Capricorn
Material:	PTFE	Inner diameter:	1.9 mm
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Colour:	dark blue	Hazard class:	n/a
Length:	1 m	Our item no:	DBW00053

Order now, we can ship this today!

£25.95 (Incl. 20% VAT)
(£21.63 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 700mm x 750mm x 900mm

Zoom in

Description The Creality 3D printer housing (L) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. With dimensions of 700mm x 750mm x 900mm, it is suitable for open-frame printers such as the Ender-3 series, Ender-5 (Pro/Plus) CP-01, CR-X (Pro), CR-6 SE, CR-10 (S/Pro/Mini/V2/V3), CR-20 series and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	700 x 750 x 900 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00263

Extra information

Video

Order now, we can ship this today!

£78.50 (Incl. 20% VAT)
(£65.42 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 760mm x 650mm x 720mm

Zoom in

Description The Creality 3D printer housing (M) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 760mm x 650mm x 720mm, it is suitable for open-frame printers such as the Ender-3 series, Ender-5 (Pro) CP-01, CR-X, CR-6 SE, CR-10 (S/Pro/ Mini/V2/V3), CR-20 series and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	760 x 650 x 720 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00262

Extra information

Video

Order now, we can ship this today!

£74.50 (Incl. 20% VAT)
(£62.08 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 480mm x 600mm x 720mm

Zoom in

Description The Creality 3D printer housing (S) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 480mm x 600mm x 720mm, it is suitable for open-frame printers such as the Ender-3, Ender-3 Pro, Ender-3 V2, CP-01, and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	480 x 600 x 720 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00261

Extra information

Video

Order now, we can ship this today!

£69.95 (Incl. 20% VAT)
(£58.29 Excl. 20% VAT)

in stock

Heated bed spring, 25mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Tunnel code:	n/a	Inner diameter:	5 mm
Length:	25 mm	Outer diameter:	8 mm
Colour:	orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00139

Order now, we can ship this today!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

Heated bed spring, 30mm (4-pack)

Zoom in

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Tunnel code:	n/a	Inner diameter:	5 mm
Length:	30 mm	Outer diameter:	8 mm
Colour:	orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00298

Order now, we can ship this today!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

USB A to B black cable, 120cm

Zoom in

Description This USB cable (type B - A) has a length of 120cm and is suitable for connecting various electronics to a computer.

Specifications

Tunnel code:	n/a	Connector A:	USB A 2 male
Colour:	black	Connector B:	USB B 2 male
Cable length:	120 cm	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00117

Order now, we can ship this today!

£4.40 (Incl. 20% VAT)
(£3.67 Excl. 20% VAT)

in stock

Zortrax DSS Station

Zoom in

Description Use Zortrax's DSS Station to automatically remove water-soluble carriers. Fill the device with water and place your model in the machine. After a few hours, the support structures are removed. The Zortrax DSS Station is suitable for Z-SUPPORT, Z-SUPPORT Plus and Z-SUPPORT Premium materials. It is also compatible with all water-soluble filaments.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Dimensions:	235 x 238 x 295 mm	Weight:	8.4 kg
Power rating:	1,000 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR00830

£538.50 (sold out) (Incl. 20% VAT)
(£448.75 Excl. 20% VAT)

GEEETECH Belt fixing clip

Zoom in

Description This GEEETECH Belt fixing clip is compatible with A10Pro, A10T, A20, A20T, A30Pro and A30T 3D printers.
The clip has a diameter of 7mm, H7mm and a thickness of 0.5mm

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Geeetech	Our item no:	DAR00678

£3.10 (Incl. 20% VAT)
(£2.58 Excl. 20% VAT)

14 day delivery

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

3D Printer starter/finishing/maintenance kit

Zoom in

Description This is the perfect starter kit for the 3D novice. This complete set contains all the essential accessories for 3D printing.

The kit includes:

The versatile Modifi3D post-processing tool
Needles to clear a clogged 3D printer nozzle
Superlube to keep your 3D printer in optimum condition
3D print post-processing set to keep everything neat and clean
Digital caliper for fine calibration of your 3D printer
A putty knife to easily remove printed objects from the print bed

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DGS00122

Order now, we can ship this today!

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

in stock

Steelmans 3dB noise reduction feet pads

Zoom in

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this today!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Geeetech A20T 3 Colour Mixing