1.75mm PLA marble Specialist PLA 1.75mm PLA Zortrax M200 Plus filament M200 Plus Zortrax Parts finder 3D printer parts 123-3D Filament 1.75 mm PLA Marble 1.1 kg (Jupiter series) 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament 1.75 mm PLA Marble 1.1 kg (Jupiter series)

2
1
0

Description Choose a unique appearance with 123-3D Marble PLA. With marble PLA you can give your prints a marble appearance. This makes busts, sculptures and miniatures of buildings appear even more real. It is easy to print with, strong and biodegradable. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA mineral	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	marble	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01143

Order now, we can ship this tomorrow!

£21.75 20% discount:

£17.40 (Incl. 20% VAT)
(£14.50 Excl. 20% VAT)

in stock

123-3D Filament 1.75 mm PLA Sand 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description Choose a unique appearance with 123-3D Sand PLA. With sand PLA you can give your prints a sand appearance, making it look as if you made them with sand. It is easy to print with, strong and biodegradable. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA mineral	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	beige	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01152

Order now, we can ship this tomorrow!

£21.75 20% discount:

£17.40 (Incl. 20% VAT)
(£14.50 Excl. 20% VAT)

in stock

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	stone fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13205

Order now, we can ship this tomorrow!

£31.40 (Incl. 20% VAT)
(£26.17 Excl. 20% VAT)

in stock

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	stone fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13237

Order now, we can ship this tomorrow!

£31.95 (Incl. 20% VAT)
(£26.63 Excl. 20% VAT)

in stock

colorFabb red brick Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder is added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour 'red brick' has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	stone fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13235

Order now, we can ship this tomorrow!

£31.80 (Incl. 20% VAT)
(£26.50 Excl. 20% VAT)

in stock

eSun eMarble white PLA filament 1.75mm, 1kg

Zoom in

1
0

Description The eMarble white PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA EMARBLE	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	marble	Hazard class:	n/a
Nozzle temp range:	180-210 °C	Our item no:	DFE20061
Amount:	1 kg

Order now, we can ship this tomorrow!

£21.75 (Incl. 20% VAT)
(£18.13 Excl. 20% VAT)

in stock

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'marble-white' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	marble white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14234

Order now, we can ship this tomorrow!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

SUNLU marble PLA filament 1.75mm, 1kg

Zoom in

Description With 1.75mm marble PLA filament you can give your prints a unique appearance. Create objects with a realistic marble look, such as busts, sculptures, miniatures or buildings. The PLA filament is easy to print with (without a heated bed) and ensures that you do not suffer from distortion and warping of prints.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 19.6 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 7.3 cm
Colour:	marble	Spool width:	6.0 cm
Nozzle temp range:	200-230	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP00171
Length:	330 m

Order now, we can ship this tomorrow!

£19.95 (Incl. 20% VAT)
(£16.63 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this tomorrow!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this tomorrow!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this tomorrow!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this tomorrow!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

1.75mm PLA marble

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

1.75mm PLA marble