1.75mm PETG carbon Specialist PETG 1.75mm PETG Zmorph Fab Advanced filament Fab Advanced Zmorph Parts finder 3D printer parts 123-3D carbon PETG filament 1.75mm, 0.5kg carbon 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D carbon PETG filament 1.75mm, 0.5kg

Description The carbon PETG filament contains 20% carbon particles. This gives 3D-printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is stiffer and more heat and impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	5.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE08000
Length:	170 m

£25.08 (sold out) (Incl. 20% VAT)
(£20.90 Excl. 20% VAT)

REAL black PC-PETG filament 1.75mm, 0.5kg

Zoom in

Description This black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02062
Length:	170 m

Order now, we can ship this tomorrow!

£29.71 10% discount:

£26.74 (Incl. 20% VAT)
(£22.28 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 1kg

Zoom in

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	8.0 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02060
Length:	340 m

Order now, we can ship this tomorrow!

£51.81 10% discount:

£46.63 (Incl. 20% VAT)
(£38.86 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 3kg

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP12062
Length:	1,020 m

Order now, we can ship this tomorrow!

£109.70 5% discount:

£104.22 (Incl. 20% VAT)
(£86.85 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg

Zoom in

Description This black BASF PET CF15 filament (1.75mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very stable and has very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best results we advise you to use one.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00099

Order now, we can ship this tomorrow!

£67.74 (Incl. 20% VAT)
(£56.45 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.40mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00104
Screwthread type:	M6

Order now, we can ship this tomorrow!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.50mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.5mm (marking #6) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.5 mm	Our item no:	DED00105
Screwthread type:	M6

Order now, we can ship this tomorrow!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm

Zoom in

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00058
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

Hygrometer round

Zoom in

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

*The hygrometer is delivered without battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	black	Our item no:	DRW00020
Brand:	123-3D

Order now, we can ship this tomorrow!

£7.40 (Incl. 20% VAT)
(£6.17 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PETG-ESD filament 1.75 mm Black 0.5 kg

Zoom in

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make the ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you would like to make a very strong print with high layer adhesion, it is advisable to switch off the fan when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn on the fan. For an ideal middle ground, it is best to run the fan at 20%.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG ESD	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	250-290 °C	Our item no:	DFP14300
Amount:	0.5 kg

Order now, we can ship this tomorrow!

£39.00 (Incl. 20% VAT)
(£32.50 Excl. 20% VAT)

in stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

Zoom in

Description This neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Plus	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02002
Length:	170 m

Order now, we can ship this tomorrow!

£40.76 5% discount:

£38.72 (Incl. 20% VAT)
(£32.27 Excl. 20% VAT)

in stock

123-3D PETG Pellets 1 kg

Zoom in

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1 kg of undried pellets, to which no dyes have yet been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00002

Order now, we can ship this tomorrow!

£8.50 (Incl. 20% VAT)
(£7.08 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this tomorrow!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this tomorrow!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

1.75mm PETG carbon

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

1.75mm PETG carbon