1.75mm TPC Flashforge Adventurer 4 filament Adventurer 4 Flashforge Parts finder 3D printer parts BASF Ultrafuse blue TPC 45D filament 1.75mm, 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

BASF Ultrafuse blue TPC 45D filament 1.75mm, 0.5kg

Description This blue BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	5002
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00202
Brand:	BASF

This product is end of life.

BASF Ultrafuse yellow TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made from Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	1003
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 4.9 cm
Colour:	yellow	Spool width:	5.7 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Our item no:	DFB00203
Brand:	BASF

This product is end of life.

BASF Ultrafuse neutral TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This neutral colour BASF Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00205

Please note: This product is now 'End of sale'. View all our 1.75mm BASF filament for an alternative.

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse orange TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The orange Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	2008
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00206
Brand:	BASF

This product is end of life.

BASF Ultrafuse red TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The red Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	3020
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00207
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse pink TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	pink	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00208

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse black TPC 45D filament 1.75mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC filament 45D is 1.75mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of maximum 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D, because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	9005
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 4.9 cm
Colour:	black	Spool width:	5.7 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Our item no:	DFB00210
Brand:	BASF

This product is end of life.

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

1.75mm TPC

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

1.75mm TPC