White 1.75mm PLA Flashforge Adventurer 4 filament Adventurer 4 Flashforge Parts finder 3D printer parts 123-3D Filament white 1.75mm PLA 1.1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament white 1.75mm PLA 1.1kg DFP01084

2
1
0

Description Our white 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	9003
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	white	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01084
Brand:	123-3D	Replaces item no:	DFP11001

Order now, we can ship this today!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D Filament white 1.75 mm High Speed PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description This white 1.75 mm High Speed PLA is ideal for use in combination with your High Speed printer. With this filament you can reach a speed of up to 600 mm/s, which is considerably faster than most high speed filaments (which only go up to 300 mm/s). High Speed PLA from 123-3D will significantly speed up your 3D printing process, without sacrificing the high quality you have come to expect from us.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA High Speed	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-65 °C	Inner diameter:	Ø 5.2 cm
Colour:	white	Spool width:	6.8 cm
Nozzle temp range:	215-240 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01183

Order now, we can ship this today!

£22.50 (Incl. 20% VAT)
(£18.75 Excl. 20% VAT)

in stock

123-3D Filament white 1.75 mm PLA 3 kg

Zoom in

2
1
0

Description Our white 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Note: This is 1 large 3kg spool of filament.

Read more about printing with PLA filament here .

This is just £14.35 per kg!

Specifications

Tunnel code:	n/a	RAL colour no:	9003
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	white	Spool width:	10.0 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP01085
Brand:	123-3D	Replaces item no:	DFP11055

Order now, we can ship this today!

£43.05 (Incl. 20% VAT)
(£35.88 Excl. 20% VAT)

in stock

123-3D Filament cream white / pearl white 1.75 mm PLA 1.1 kg

Zoom in

2
1
0

Description Our cream white/pearl white 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition ro PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	9001
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	Cream white / Pearl white	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01080
Brand:	123-3D	Replaces item no:	DFP11002

Order now, we can ship this today!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D Filament snow white 1.75mm PLA 1.1kg

Zoom in

2
1
0

Description Our snow white 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Colour:	snow white	Hazard class:	n/a
Nozzle temp range:	195 - 235 °C	Our item no:	DFP01082
Amount:	1.1 kg	Replaces item no:	DFP11003
Brand:	123-3D

Order now, we can ship this today!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D chameleon green-white PLA filament 1.75mm, 1kg

Zoom in

Description This green-white chameleon 1.75mm PLA filament from 123-3d.co.uk has a beautiful shine. The most special thing about this filament is the unique colour change. Be enchanted by this beautiful green-white chameleon filament and print extra striking 3D designs with it!

This PLA filament is stronger and less brittle than standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	green/white	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	205-230	Spool width:	7.8 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP11071

Order now, we can ship this today!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

123-3D Satin filament White 1.75 mm PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description White satin PLA filament has a silky soft satin sheen and is suitable for printing many different objects. The added polymers give this PLA the silky appearance. It is just as easy to use, strong and biodegradable as normal PLA. The heat resistance is even better than you are used to from regular PLA. Satin PLA is therefore ideal for making decorations, jewelry and prototypes. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA S	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	white	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01138

Order now, we can ship this today!

£21.75 (Incl. 20% VAT)
(£18.13 Excl. 20% VAT)

in stock

REAL starlight satin PLA filament 1.75mm, 0.5kg

Zoom in

Description The starlight satin REAL PLA filament (1.75mm) has a beautiful satin sheen and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with precise details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	satin starlight	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02199
Length:	165 m

Order now, we can ship this today!

£20.61 (Incl. 20% VAT)
(£17.18 Excl. 20% VAT)

in stock

REAL white PLA filament 1.75mm, 0.5kg

Zoom in

Description The white REAL PLA filament (1.75mm) is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, whereby details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-215 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Length:	165 m	Our item no:	DFP02066

Order now, we can ship this today!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL white PLA filament 1.75mm, 1kg

Zoom in

Description The white REAL PLA filament (1.75mm) has a clear colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-215 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP02002

Order now, we can ship this today!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL white PLA filament 1.75mm, 3kg

Zoom in

Description The white REAL PLA filament (1.75mm) is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with precise details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 30.0 cm
Colour:	white	Inner diameter:	Ø 5.1 cm
Nozzle temp range:	190-215 °C	Spool width:	10.5 cm
Amount:	3 kg	Hazard class:	n/a
Length:	990 m	Our item no:	DFP02045

Order now, we can ship this today!

£61.63 (Incl. 20% VAT)
(£51.36 Excl. 20% VAT)

in stock

REAL white PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description The white PLA matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	white	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02122
Length:	165 m

£18.28 (Incl. 20% VAT)
(£15.23 Excl. 20% VAT)

14 day delivery

REAL white PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This white PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA R	RAL colour no:	9016
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-220 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP12038

£22.06 (sold out) (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

REAL white PLA Tough filament 1.75mm, 0.5kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	white	Spool width:	4.5 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP12024
Length:	165 m

Order now, we can ship this today!

£20.61 (Incl. 20% VAT)
(£17.18 Excl. 20% VAT)

in stock

REAL white PLA Tough filament 1.75mm, 1kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75 mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	white	Spool width:	8.0 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP12002
Length:	330 m

Order now, we can ship this today!

£31.88 (Incl. 20% VAT)
(£26.57 Excl. 20% VAT)

in stock

REAL white PLA Tough filament 1.75mm, 5kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 35.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.1 cm
Colour:	white	Spool width:	10.5 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFP12028
Length:	1,650 m

Order now, we can ship this today!

£137.66 (Incl. 20% VAT)
(£114.72 Excl. 20% VAT)

in stock

BASF Ultrafuse pearl white PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is pearl white in colour and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	1013
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	pearl white	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00117
Brand:	BASF

Order now, we can ship this today!

£23.80 (Incl. 20% VAT)
(£19.83 Excl. 20% VAT)

in stock

BASF Ultrafuse white PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is white and suitable for 3D printing all kinds of creative designs.The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	9010
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00124
Brand:	BASF

£25.20 (Incl. 20% VAT)
(£21.00 Excl. 20% VAT)

14 day delivery

REAL filament white 1.75 mm PLA 5 kg

Zoom in

2
1
0

Description The white REAL PLA filament (1.75 mm) has a bright color and is suitable for 3D printing a wide variety of objects. With a perfected round shape, jamming is prevented. PLA can print objects in any shape, whereby details are also shown to their best advantage. It is harder and glossier than ABS and does not require a heated bed. PLA is an environmentally friendly type of plastic, suitable for recycling.

This extra large roll allows you to create even larger prints without having to change your roll halfway through.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0-55 °C	Spool width:	10.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	190-215 °C	Our item no:	DFP02289
Amount:	5 kg	Replaces item no:	DFP02147
Brand:	REAL

Order now, we can ship this today!

£100.26 (Incl. 20% VAT)
(£83.55 Excl. 20% VAT)

in stock

BASF Ultrafuse white PLA filament 1.75mm, 2.5kg

Zoom in

Description This BASF PLA filament (1.75mm) is white and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	9010
Material:	PLA	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00127
Brand:	BASF

This product can be ordered 1 time(s).

£65.98 (sold out) (Incl. 20% VAT)
(£54.98 Excl. 20% VAT)

BASF Ultrafuse white PLA filament 1.75mm, 4.5kg

Zoom in

Description This BASF PLA filament (1.75mm) is white and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	9010
Material:	PLA	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00131
Brand:	BASF

Order now, we can ship this today!

£94.75 (Incl. 20% VAT)
(£78.96 Excl. 20% VAT)

in stock

REAL white PLA recycled filament 1.75mm, 5kg

Zoom in

2
1
0

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This white PLA filament is made from the manufacturer's industrial residues to prevent waste. The remains are recycled into a brand new filament with the same, or even better, properties than the original. The filament has a diameter of 1.75 mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA you have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA R	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0-55 °C	Spool width:	10.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	190-220 °C	Our item no:	DFP02318
Amount:	5 kg	Replaces item no:	DFP12039
Brand:	REAL

Order now, we can ship this today!

£100.26 (Incl. 20% VAT)
(£83.55 Excl. 20% VAT)

in stock

BASF Ultrafuse white PLA filament 1.75mm, 8.5kg

Zoom in

Description This BASF PLA filament (1.75mm) is white and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	9010
Material:	PLA	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	0-60 °C	Spool width:	17.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00134
Brand:	BASF

£199.49 (Incl. 20% VAT)
(£166.24 Excl. 20% VAT)

14 day delivery

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 0.75kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	neutral white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00177

Order now, we can ship this today!

£31.80 (Incl. 20% VAT)
(£26.50 Excl. 20% VAT)

in stock

REAL filament white 1.75mm PLA Matte 1kg

Zoom in

2
1
0

Description The white PLA Matte filament (1.75 mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very simple; the material has good bed adhesion and can be printed faster than with standard PLA filament.

Because the filament partly contains recycled material, its color may differ per roll.

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-60 °C	Spool width:	7.0 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	205-225 °C	Our item no:	DFP02246
Amount:	1 kg	Replaces item no:	DFP02120
Brand:	REAL

Order now, we can ship this today!

£25.46 (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

in stock

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 2.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is guaranteed to provide even faster and more consistent 3D printing. The versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	neutral white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00180

Order now, we can ship this today!

£76.94 (Incl. 20% VAT)
(£64.12 Excl. 20% VAT)

in stock

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 4.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is guaranteed to provide even faster and more consistent 3D printing. The versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.0 cm
Colour:	neutral white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00183

Order now, we can ship this today!

£141.80 (Incl. 20% VAT)
(£118.17 Excl. 20% VAT)

in stock

BASF Ultrafuse neutral white PLA Pro1 filament 1.75mm, 8.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is guaranteed to provide even faster and more consistent 3D printing. The versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The neutral white filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	0-60 °C	Spool width:	17.0 cm
Colour:	neutral white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00186

£258.00 (Incl. 20% VAT)
(£215.00 Excl. 20% VAT)

14 day delivery

colorFabb white LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description The colorFabb LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC airplanes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and is white in colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13245
Amount:	0.75 kg

Order now, we can ship this today!

£38.25 (Incl. 20% VAT)
(£31.88 Excl. 20% VAT)

in stock

colorFabb white LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and is white in colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13246
Amount:	0.75 kg

Order now, we can ship this today!

£39.40 (Incl. 20% VAT)
(£32.83 Excl. 20% VAT)

in stock

colorFabb white PLA Economy filament 1.75mm, 2.2kg

Zoom in

Description This white colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13104
Length:	750 m

£35.75 (Incl. 20% VAT)
(£29.79 Excl. 20% VAT)

14 day delivery

colorFabb white semi-matte PLA filament 1.75mm, 0.75kg

Zoom in

Description You can create beautiful prints with this semi-matte white PLA filament from colorFabb. Printing with this filament is easy and fast. It has good hardness and is less brittle than other filaments. This filament also has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA R	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	60-70 °C	Spool width:	5.5 cm
Colour:	semi matte white	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13201
Length:	250 m

Order now, we can ship this today!

£24.40 (Incl. 20% VAT)
(£20.33 Excl. 20% VAT)

in stock

colorFabb white semi-matte PLA filament 1.75mm, 2.2kg

Zoom in

Description You can create beautiful prints with this semi-matte white PLA filament from colorFabb. Printing with this filament is easy and fast. It has good hardness and is less brittle than other filaments. This filament also has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA R	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	10.2 cm
Colour:	semi matte white	Filament print speed:	-
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13203
Length:	750 m

£66.20 (Incl. 20% VAT)
(£55.17 Excl. 20% VAT)

14 day delivery

colorFabb white PLA Vibers filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is a third less than normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is predominantly white, but is reminiscent of marl due to a slightly yellow tint. The filament is supplied on a coil of recycled cardboard to further minimise the use of plastic.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	Vibers	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13215
Length:	250 m

Order now, we can ship this today!

£31.50 (Incl. 20% VAT)
(£26.25 Excl. 20% VAT)

in stock

colorFabb PLA-HP filament white 1.75 mm 0.75 kg

Zoom in

Description PLA-HP filament white 1.75 mm from colorFabb has both the advantages of normal PLA and additional advantages. Normal PLA is biodegradable, emits almost no odor during printing and can easily be printed at a lower temperature. PLA-HP also has a higher temperature resistance (134C HDT), so prints made from this material can be cleaned in the dishwasher. The filament does not require annealing for this resistance. The 3D prints can be used immediately after printing at higher temperatures. Ideal for prints that need to function well in warm conditions.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-50 °C	Spool width:	5.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	200-220 °C	Our item no:	DFP13267
Amount:	0.75 kg

Order now, we can ship this today!

£22.40 (Incl. 20% VAT)
(£18.67 Excl. 20% VAT)

in stock

colorFabb blue-white PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in the colour blue-white. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. The blue provides a cool undertone, making the filament super white in color. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13118
Length:	250 m

Order now, we can ship this today!

£19.60 (Incl. 20% VAT)
(£16.33 Excl. 20% VAT)

in stock

colorFabb white PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in white. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and is less brittle than other filaments. The beautiful, white colour ensures fantastic prints. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13142
Length:	250 m

Order now, we can ship this today!

£19.55 (Incl. 20% VAT)
(£16.29 Excl. 20% VAT)

in stock

colorFabb white PLA Tough filament 1.75mm, 0.75kg

Zoom in

Description The improved colorFabb Tough is an extra strong PLA filament in the colour white, with a diameter of 1.75mm. This filament offers the ideal balance between sturdiness and ease-of-use and is therefore ideal for beginners. Tough PLA is 70% stronger than regular PLA and has a good tensile strength. In addition, printing with this material is easier than ever.

PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

The ideal print temperature is 210°C to 230°C. For best results, use a heated bed of 50°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA tough	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13168
Length:	250 m

Order now, we can ship this today!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

Dremel white PLA filament 1.75 mm, 0.75 kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this white PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects that require little force. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Tunnel code:	n/a	Brand:	Dremel
Material:	PLA	Outer diameter:	Ø 18.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 1.9 cm
Heated bed temp:	0-60 °C	Spool width:	5.4 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	200-240 °C	Our item no:	DCP00178
Amount:	0.75 kg

£32.50 (Incl. 20% VAT)
(£27.08 Excl. 20% VAT)

14 day delivery

eSun eMarble white PLA filament 1.75mm, 1kg

Zoom in

1
0

Description The eMarble white PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape, where details also come into their own. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA EMARBLE	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	marble	Hazard class:	n/a
Nozzle temp range:	180-210 °C	Our item no:	DFE20061
Amount:	1 kg

Order now, we can ship this today!

£21.75 (Incl. 20% VAT)
(£18.13 Excl. 20% VAT)

in stock

eSun ePLA-Matte filament 1.75 mm Milky White 1 kg (paper spool)

Zoom in

Description This eSun ePLA-Matte filament in the color Milky White is an easy to print, odorless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	45-60 °C	Spool width:	6.4 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20256
Amount:	1 kg

Order now, we can ship this today!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

eSun ePLA-ST filament 1.75 mm Natural 1 kg

Zoom in

Description This Natural eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	natural	Hazard class:	n/a
Nozzle temp range:	200-230 °C	Our item no:	DFE20260
Amount:	1 kg

Order now, we can ship this today!

£18.75 (Incl. 20% VAT)
(£15.63 Excl. 20% VAT)

in stock

eSun PLA eSilk filament White 1.75 mm 1 kg

Zoom in

1
0

Description The white PLA eSilk filament from eSun has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun PLA eSilk filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA ESILK	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	190-220 °C	Our item no:	DFE20205
Amount:	1 kg

Order now, we can ship this today!

£17.95 (Incl. 20% VAT)
(£14.96 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75 mm Bone White 1 kg

Zoom in

1
0

Description The bone white PLA+ filament from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modeling. This eSun PLA+ filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20284
Amount:	1 kg

Order now, we can ship this today!

£15.95 (Incl. 20% VAT)
(£13.29 Excl. 20% VAT)

in stock

eSun PLA+ Re-fill filament 1.75mm White 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. The cold white filament from eSun is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Amount:	1 kg
Material:	PLA matte	Brand:	eSun
Filament diameter:	1.75 mm	Inner diameter:	Ø 9.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	cold white	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20117

Order now, we can ship this today!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Cold White 1kg

Zoom in

1
0

Description eSun's cold white PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	cold white	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20096
Amount:	1 kg

Order now, we can ship this today!

£15.95 (Incl. 20% VAT)
(£13.29 Excl. 20% VAT)

in stock

eSun white PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's white filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Amount:	1 kg
Material:	PLA matte	Brand:	eSun
Filament diameter:	1.75 mm	Inner diameter:	Ø 9.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20217

Order now, we can ship this today!

£16.55 (Incl. 20% VAT)
(£13.79 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Warm White 1kg

Zoom in

1
0

Description eSun's white PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20102
Amount:	1 kg

Order now, we can ship this today!

£15.95 (Incl. 20% VAT)
(£13.29 Excl. 20% VAT)

in stock

Polymaker PolyLite white PLA filament 1.75mm, 1kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and bright white colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190°C to 230°C. We recommend a temperature between 25°C and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14074

Order now, we can ship this today!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite white PLA filament 1.75mm, 3kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a bright white colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190°C to 230°C. We recommend a temperature between 25°C and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14084

Order now, we can ship this today!

£69.98 (Incl. 20% VAT)
(£58.32 Excl. 20% VAT)

in stock

Polymaker PolyLite PLA filament 1.75 mm White 5 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75 mm and a bright white color. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, down to the last detail. PLA filament is harder and shinier than ABS. The ideal printing temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.2 cm
Heated bed temp:	25-60 °C	Spool width:	16.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFP14315

£122.98 (Incl. 20% VAT)
(£102.48 Excl. 20% VAT)

14 day delivery

Polymaker PolyLite white PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite white PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	30-60 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14251

Order now, we can ship this today!

£28.79 (Incl. 20% VAT)
(£23.99 Excl. 20% VAT)

in stock

Polymaker PolyLite Silk PLA filament 1.75 mm White 1 kg

Zoom in

Description Print your designs with the white glossy PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. This makes the individual print layers on the side surfaces less visible, resulting in a smooth surface.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14323

Order now, we can ship this today!

£25.98 (Incl. 20% VAT)
(£21.65 Excl. 20% VAT)

in stock

Polymaker PolyMax white PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright white colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14118

Order now, we can ship this today!

£36.89 (Incl. 20% VAT)
(£30.74 Excl. 20% VAT)

in stock

Polymaker PolyMax white PLA filament 1.75mm, 3kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright white colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14120

Order now, we can ship this today!

£133.68 (Incl. 20% VAT)
(£111.40 Excl. 20% VAT)

in stock

SUNLU PLA Matte white filament 1.75mm, 1kg

Zoom in

Description This 1kg spool of SUNLU matte white PLA (1.75mm) has a matte, non-glossy finish. It is a polylactic acid filament that is made from renewable resources (like corn starch or sugarcane) and breaks down more easily than traditional plastics.

Matte PLA offers good print quality with less warping compared to regular PLA due to its chemistry and matte texture. It can produce detailed, matte-textured 3D printed objects. It requires similar print settings to regular PLA, like printing at 190-220°C with a cooled print bed. Overall, matte PLA provides an alternative material for 3D printing matte, detailed objects.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA	Outer diameter:	Ø 19.6 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	0-80 °C	Spool width:	6.0 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP16004
Amount:	1 kg

Order now, we can ship this today!

£16.75 (Incl. 20% VAT)
(£13.96 Excl. 20% VAT)

in stock

Polymaker PolySonic PLA filament 1.75 mm white 1 kg

Zoom in

Description PolySonic PLA filament from Polymaker is a real game changer in the world of 3D printing. This filament can be printed at very high speed without sacrificing quality. The fast extrusion, high precision and excellent layer adhesion allow you to get maximum benefit from your high-speed printer. Discover PolySonic PLA white now and reduce your printing time without losing strength or quality.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14375

Order now, we can ship this today!

£26.59 (Incl. 20% VAT)
(£22.16 Excl. 20% VAT)

in stock

SUNLU PLA+ white filament 1.75mm, 1kg

Zoom in

Description This 1kg spool of white 1.75mm SUNLU PLA+ is PLA that has been enhanced with the addition of modifiers during PLA synthesis. PLA+ has superior flexibility, strength & ductility.

Items that have been 3D printed from SUNLU PLA+ have a smoother surface and also a better appearance than standard PLA.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA matte	Outer diameter:	Ø 19.6 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	70-80 °C	Spool width:	6.0 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP16001
Amount:	1 kg

Order now, we can ship this today!

£17.25 (Incl. 20% VAT)
(£14.38 Excl. 20% VAT)

in stock

Polymaker PolySonic PLA Pro filament 1.75 mm white 1 kg

Zoom in

Description PolySonic PLA Pro from Polymaker is ideal for creating functional prints in a short time. This super strong filament can be printed at very high speed by high-speed printers and has very favorable properties. The adjusted composition ensures robust and durable prints. In addition, the impact force is close to that of ABS and the flexibility is even better than ASA and PETG. With PolySonic PLA Pro white you are assured of consistent extrusion, resulting in smooth prints.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14380

Order now, we can ship this today!

£34.49 (Incl. 20% VAT)
(£28.74 Excl. 20% VAT)

in stock

Polymaker PolyTerra cotton white PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Cotton White' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	cotton white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14168

Order now, we can ship this today!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA filament 1.75 mm Cotton White 3 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. The extra smooth PolyTerra filament in the color 'Cotton White' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and for every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	cotton white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14353

Order now, we can ship this today!

£48.95 (Incl. 20% VAT)
(£40.79 Excl. 20% VAT)

in stock

Polymaker PolyTerra marble-white PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'marble-white' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	marble white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14234

Order now, we can ship this today!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA filament 1.75 mm Muted White 1 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. The extra smooth PolyTerra filament in the color 'Muted White' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and for every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14344

Order now, we can ship this today!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra white PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimised for better layer adhesion. The PolyTerra filament in the colour 'white' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14243

Order now, we can ship this today!

£20.95 (Incl. 20% VAT)
(£17.46 Excl. 20% VAT)

in stock

XYZprinting tough white PLA filament 1.75mm, 0.6kg (Cartridge)

Zoom in

Description The Tough PLA filament from XYZprinting is perfect for making sturdy prints with a high stiffness. The filament is more shock resistant than regular PLA and stronger than ABS. This way you print reliable objects that can take a beating.

Specifications

Tunnel code:	n/a	Brand:	XYZprinting
Material:	PLA tough	Outer diameter:	Ø 16.8 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-45 °C	Spool width:	5.4 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	195-215 °C	Our item no:	DFP05036
Amount:	0.6 kg

This product can be ordered 1 time(s).

This product is end of life.

Zortrax white Z-PLA filament 1.75mm, 0.8kg

Zoom in

Description Zortrax Z-PLA 3D filament is made of environmentally friendly components. With this biodegradable filament you can easily print complex models with extreme precision and a smooth surface.

This Zortrax filament in the colour white has a diameter of 1.75mm and a weight of ± 800 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	0-60 °C	Spool width:	5.4 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP00161
Amount:	0.8 kg

£32.50 (sold out) (Incl. 20% VAT)
(£27.08 Excl. 20% VAT)

Zortrax white Z-PLA filament 1.75mm, 2kg

Zoom in

Description Zortrax Z-PLA 3D filament is made of environmentally friendly components. With this biodegradable filament you can easily print complex models with extreme precision and a smooth surface.

This Zortrax filament in the colour white has a diameter of 1.75mm and a weight of ± 2000 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Spool width:	7.4 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP00159
Amount:	2 kg

£60.92 (sold out) (Incl. 20% VAT)
(£50.77 Excl. 20% VAT)

Zortrax plaster white Z-PLA Pro filament 1.75mm, 0.8kg

Zoom in

Description Zortrax Z-PLA Pro 3D filament is made of environmentally friendly material and contains gypsum as an additive. With this biodegradable filament you can print models with an even, matte surface, making the details more visible. It is extremely suitable for printing large models, because the filament hardly shrinks or warps.

This Zortrax filament in plaster white has a diameter of 1.75mm and a weight of ± 800 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	0-60 °C	Spool width:	5.7 cm
Colour:	plaster white	Hazard class:	n/a
Nozzle temp range:	202-212 °C	Our item no:	DFP00147
Amount:	0.8 kg

£42.32 (sold out) (Incl. 20% VAT)
(£35.27 Excl. 20% VAT)

Zortrax plaster white Z-PLA Pro filament 1.75mm, 2kg

Zoom in

Description Zortrax Z-PLA Pro 3D filament is made of environmentally friendly material and contains gypsum as an additive. With this biodegradable filament you can print models with an even, matte surface, making the details more visible. It is extremely suitable for printing large models, because the filament hardly shrinks or warps.

This plaster-coloured Zortrax filament has a diameter of 1.75mm and a weight of ± 2000 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA Pro	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Spool width:	7.4 cm
Colour:	plaster white	Hazard class:	n/a
Nozzle temp range:	202-212 °C	Our item no:	DFP00146
Amount:	2 kg

£85.51 (sold out) (Incl. 20% VAT)
(£71.26 Excl. 20% VAT)

Polymaker PolyTerra Dual PLA filament 1.75 mm Shadow Black (White-Black) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Shadow Black color is white on one side and black on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14382
Amount:	1 kg

Order now, we can ship this today!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

MatX AMBX-PLA Antimicrobial filament Signal White 1.75 mm 0.75 kg

Zoom in

1
0

Description Discover the revolutionary MatX AMBX-PLA Antimicrobial filament: a groundbreaking innovation in the world of safe 3D printing. This unique product stands out as the first 3D printer filament to provide effective antimicrobial properties without the use of harmful biocides. The MatX AMBX filament is anti-microbial and lab tests* show that it contains >99.99% fewer bacteria compared to standard PLA, the AMBX technology used is 100% safe for both humans and the environment.

This high-quality anti-microbial filament is ideal for printing:

Medical supplies
household applications

The MatX AMBX-PLA Antimicrobial filament in the color Signal White is supplied on a transparent spool, compatible with all common 3D printers and material stations. For optimal life of the filament, we recommend storage in a dry and dark environment after use.

The MatX AMBX filament has a diameter of 1.75 mm and contains 0.75 kg of high-quality filament on a transparent spool. This innovative product guarantees safety, durability and excellent performance in 3D printing. With MatX AMBX you choose the future of antimicrobial and safe printing.

*Based on lab testing: ISO22196

Extra information:

Specifications

Tunnel code:	n/a	Nozzle temp range:	190-215
Material:	AMBX PLA	Amount:	0.75 kg
Filament diameter:	1.75 mm	Brand:	mATX
Heated bed temp:	0-60	Hazard class:	n/a
Colour:	signal white	Our item no:	DFP15001

£48.80 (Incl. 20% VAT)
(£40.67 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

White

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

White