Creality 3D Ender-3 upgrades Ender-3 Creality 3D Parts finder 3D printer parts Bowden hotend kit for Creality 3D Printers extruder ptfe capricorn hot end 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

Home
3D printer parts
Parts finder
Creality 3D
Ender-3
Creality 3D Ender-3 upgrades

Creality 3D BLTouch auto bed levelling kit v1

Creality3D Creality 3D BLTouch auto bed levelling kit v1 2001020149 DAR00014

Description The Creality 3D BLTouch kit is specially composed for Creality printers. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.
The Creality BLTouch sensor is suitable for various print bed surfaces, such as metal, glass, wood and tape.

Note: 123-3d.co.uk does not offer support when installing this kit. Before installing, make sure the polarisation and connectors match your motherboard. The installation video is for the Ender-3, please download the correct firmware for your printer type.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Creality3D	Hazard class:	n/a
Voltage VDC:	5 v/°c	Our item no:	DAR00014

Order now, we can ship this tomorrow!

£47.95 (Incl. 20% VAT)
(£39.96 Excl. 20% VAT)

in stock

Antclabs BLTouch Auto Bed Levelling Sensor v3.1

Antclabs BLTouch Auto Bed Levelling Sensor v3.1 BLTOUCH DAR00016

Description The BLTouch is a sensor for automatic bed levelling. The sensor works simply, smartly and accurately. The advantage of the sensor is that it retracts automatically after use so that it does not get in the way during 3D printing.

The BLTouch sensor works with almost any 3D printer and is suitable for various print bed surfaces such as metal, glass, wood and tape.

Specifications

Tunnel code:	n/a	Weight:	0.01 kg
Cable length:	15 cm	Manual:	Download
Brand:	ANTCLABS	Hazard class:	n/a
Voltage VDC:	5 v/°c	Our item no:	DAR00016

Order now, we can ship this tomorrow!

£29.60 (Incl. 20% VAT)
(£24.67 Excl. 20% VAT)

in stock

Bowden hotend kit for Creality 3D Printers

123-3D Bowden hotend kit for Creality 3D Printers DAR00225

Description Give your Creality 3D printer an upgrade with this Bowden hotend kit.

The hotend kit consists of:

1 x Aluminium MK8 Bowden extruder upgrade kit red right
1 x Capricorn TL 1 Metre transparent PTFE tube 1.75mm
1 x Micro Swiss all metal hotend kit for Creality CR-10 / Ender 3D Printers

The Bowden extruder is made of durable red aluminium and is suitable for filament with a diameter of 1.75mm. With the PTFE tube you can easily connect the whole to the metal Micro Swiss hotend kit, which consists of an aluminium cooling block, a titanium heatbreak, an aluminium heater block, a brass-coated nozzle of 0.4mm, a silicone sock and various mounting parts.

Suitable for the following 3D printers:

Creality CR-10
Creality CR-10 Mini
Creality CR-10S
Creality CR-10 S4
Creality CR-10 S5
Creality CR-20
Creality CR-20 Pro
Creality Ender-3
Creality Ender-3 Pro
Creality Ender-5
Creality Ender-5 Plus

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DAR00225

Order now, we can ship this tomorrow!

£125.50 (Incl. 20% VAT)
(£104.58 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 480mm x 600mm x 720mm

Creality3D Creality 3D Printer housing, 480mm x 600mm x 720mm 1002990026 4008030005 DAR00261

Description The Creality 3D printer housing (S) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 480mm x 600mm x 720mm, it is suitable for open-frame printers such as the Ender-3, Ender-3 Pro, Ender-3 V2, CP-01, and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	480 x 600 x 720 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00261

Extra information

Order now, we can ship this tomorrow!

£69.95 (Incl. 20% VAT)
(£58.29 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 760mm x 650mm x 720mm

Creality3D Creality 3D Printer housing, 760mm x 650mm x 720mm 1002990044 DAR00262

Description The Creality 3D printer housing (M) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. Measuring 760mm x 650mm x 720mm, it is suitable for open-frame printers such as the Ender-3 series, Ender-5 (Pro) CP-01, CR-X, CR-6 SE, CR-10 (S/Pro/ Mini/V2/V3), CR-20 series and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	760 x 650 x 720 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00262

Extra information

Order now, we can ship this tomorrow!

£74.50 (Incl. 20% VAT)
(£62.08 Excl. 20% VAT)

in stock

Creality 3D Printer housing, 700mm x 750mm x 900mm

Creality3D Creality 3D Printer housing, 700mm x 750mm x 900mm 1002990033 DAR00263

Description The Creality 3D printer housing (L) ensures that the temperature in the print chamber is perfectly maintained. This way your prints are not negatively affected by the external environment. The housing has a storage compartment on the side perfect for storing a roll of filament.

Made from flame-retardant aluminium foil, this dust-tight protective cover limits the spread of vapours and helps minimise any smoke build-up. The easy-to-install housing is foldable and therefore easy to store. With dimensions of 700mm x 750mm x 900mm, it is suitable for open-frame printers such as the Ender-3 series, Ender-5 (Pro/Plus) CP-01, CR-X (Pro), CR-6 SE, CR-10 (S/Pro/Mini/V2/V3), CR-20 series and others.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	700 x 750 x 900 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00263

Extra information

Order now, we can ship this tomorrow!

£78.50 (Incl. 20% VAT)
(£65.42 Excl. 20% VAT)

in stock

E3D Revo CR upgrade kit 24V, 1.75mm (0.4mm nozzle)

E3D Revo CR upgrade kit 24V, 1.75mm (0.4mm nozzle) REVO-CREALITY-175-24V-AS DAR00758

Description With the E3D Revo CR upgrade kit you'll be able to change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300°C. The set includes a 24V Revo CR hotend with an interchangeable 0.4mm nozzle.

The E3D Revo nozzle has its own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Compatible with the following printers:
	●	CR-20	●	Ender-5
	●	CR-20 Pro	●	Ender-5 Pro
	●	Ender-3	●	Ender-5 Plus
	●	Ender-3 Pro	●	Ender-6
	●	Ender-3 V2

Specifications

Tunnel code:	n/a	Voltage:	24 v
Max temp:	300 °C	Brand:	E3D
Power rating:	40 W	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR00758

Order now, we can ship this tomorrow!

£82.95 (Incl. 20% VAT)
(£69.13 Excl. 20% VAT)

in stock

E3D Revo CR upgrade kit 24V, 1.75mm (0.25/0.4/0.6/0.8mm nozzles)

E3D Revo CR upgrade kit 24V, 1.75mm (0.25/0.4/0.6/0.8mm nozzles) REVO-CREALITY-175-24V-AS-FL DAR00760

Description With the E3D Revo CR upgrade kit you can change the nozzle without tools. The improved heatsink also ensures that printing can be done with a maximum temperature of 300°C. The set includes a 24V Revo CR hotend with four interchangeable 0.25, 0.4, 0.6 and 0.8mm diameter nozzles.

The E3D Revo nozzles are equipped with their own heatbreak. This means that it is not necessary to tighten the nozzle at a high temperature. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend.

Compatible with the following printers:
	●	CR-20	●	Ender-5
	●	CR-20 Pro	●	Ender-5 Pro
	●	Ender-3	●	Ender-5 Plus
	●	Ender-3 Pro	●	Ender-6
	●	Ender-3 V2

Specifications

Tunnel code:	n/a	Voltage:	24 v
Max temp:	300 °C	Brand:	E3D
Power rating:	40 W	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR00760

Order now, we can ship this tomorrow!

£126.95 (Incl. 20% VAT)
(£105.79 Excl. 20% VAT)

in stock

E3D Revo CR HeaterCore 24V

E3D Revo CR HeaterCore 24V RC-CORE-CREALITY-24V-AS DAR00762

Description The E3D Revo CR HeaterCore is a 40W 24V heating element that can be easily exchanged with the E3D tool-free exchange system. The heater core is connected to the cold end via a spring and comes with a spring and a sock.

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	300 °C	Hazard class:	n/a
Power rating:	40 W	Our item no:	DAR00762
Voltage:	24 v

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

14 day delivery

E3D Revo CR heatsink

E3D Revo CR heatsink REVO-CREALITY-175-SINK DAR00763

Description The E3D Revo CR heatsink is designed to be used with Creality printers. The extra light construction provides improved, faster performance. The aluminium heatsink is anodised in black and therefore a nice addition to the other Creality parts.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	aluminium	Hazard class:	n/a
Colour:	black	Our item no:	DAR00763

Order now, we can ship this tomorrow!

£25.95 (Incl. 20% VAT)
(£21.63 Excl. 20% VAT)

in stock

Steelmans 3dB noise reduction feet pads

Steelmans3D Steelmans 3dB noise reduction feet pads 3DB-V1 DAR00265

Description Prevent printing problems and reduce the noise of your 3D printer with the Noise Reduction Feet Pads of 3dB.

The noise reduction feet pads attach under your 3D printer to reduce noise caused by vibrations. The 3dB pads provide extra stability even while printing at high speed. The feet pads ensure your prints are always high quality and you can prepare your next project while printing.

Specifications

Tunnel code:	n/a	Video promo:	Promotional video
Quantity:	4 Quantity	Hazard class:	n/a
Brand:	Steelmans3D	Our item no:	DAR00265

Order now, we can ship this tomorrow!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

BigTreeTech RRF E3 v1.1 32-bit mainboard

BigTreeTech RRF E3 v1.1 32-bit mainboard DAR00450

Description

With this motherboard from Bigtreetech you can easily upgrade your 3D printer.

The RRF E3 v1.1 is equipped with a USB connection and four motor driver interfaces: XM, YM, ZAM, ZBM, EM. You can easily expand the interface to include a filament detection function, a resume printing function, BLTouch for automatic bed leveling and RGB light. In addition, you can connect the automatic shutdown module so that your 3D printer turns off automatically after the print is completed.

The mainboard has a size of 103.75mm x 75.25mm and is compatible with the Ender 3, Ender 3 Pro, Ender 5 and CR10.

Please note we do not offer support on the installation of this product.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Dimensions:	100.75 x 70.25 mm	Network:	WiFi
Operating volt logic:	3.3V	Hazard class:	n/a
Input voltage:	12-24V	Printer has USB:	yes
Processor:	ARM CORTEX M4	Our item no:	DAR00450
On-board stepper drivers:	5

Order now, we can ship this tomorrow!

£56.95 (Incl. 20% VAT)
(£47.46 Excl. 20% VAT)

in stock

Bondtech DDX V3 Direct Drive Extruder for Creality Ender & CR-10(S)

Bondtech DDX V3 Direct Drive Extruder for Creality Ender & CR-10(S) EXT-KIT-77-01-V3 DBO00049

Description This Bondtech DDX Extruder is suitable for 3D printers of the Creality Ender and CR-10(S). This copy is a very powerful dual drive extruder based on the BMG Bondtech Mini Geared. It gives you all kinds of options to, for example, print with different materials, use wider nozzles and create super detailed 3D prints. The housing provides effective cooling of the hotend. Thanks to the transmission ratio of 3:1 you can achieve high resolution prints with narrow nozzles or high flow prints with larger nozzles. The kit replaces the original Bowden extruder of your 3D printer. Tools are required to assemble the kit (Allen and screwdrivers).

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00049

Order now, we can ship this tomorrow!

£183.50 (Incl. 20% VAT)
(£152.92 Excl. 20% VAT)

in stock

Capricorn TL Creality 3D kit transparent including pneufit couplings and cutter, 1m

Capricorn TL Creality 3D kit transparent including pneufit couplings and cutter, 1m DBW00052

Description The Capricorn TL Creality Kit is specially composed for the Creality 3D printers (CR-10, CR-10S, Ender-3, Ender-3 Pro).

This kit contains the following parts:

1 Metre 1.75mm Fluorescent PTFE Tubing
PC4-M6 Extruder Pneufit for Creality
PC4-M10 Hotend Pneufit for Creality
Premium Ultra-Sharp PTFE Cutter

Specifications

Tunnel code:	n/a	Brand:	Capricorn
Material:	PTFE	Inner diameter:	2 mm
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Colour:	transparent blue	Hazard class:	n/a
Length:	1 m	Our item no:	DBW00052

Order now, we can ship this tomorrow!

£25.95 (Incl. 20% VAT)
(£21.63 Excl. 20% VAT)

in stock

Capricorn XS Creality 3D kit including pneufit couplings and cutter, 1m

Capricorn XS Creality 3D kit including pneufit couplings and cutter, 1m DBW00053

Description The Capricorn XS Creality Kit is specially composed for the Creality 3D printers (CR-10, CR-10S, Ender-3, Ender-3 Pro).

The kit contains the following parts:

1 Metre 1.75mm XS PTFE Tubing
PC4-M6 Extruder Pneufit for Creality
PC4-M10 Hotend Pneufit for Creality
Premium Ultra-Sharp PTFE Cutter

Specifications

Tunnel code:	n/a	Brand:	Capricorn
Material:	PTFE	Inner diameter:	1.9 mm
Filament diameter:	1.75 mm	Outer diameter:	4 mm
Colour:	dark blue	Hazard class:	n/a
Length:	1 m	Our item no:	DBW00053

Order now, we can ship this tomorrow!

£25.95 (Incl. 20% VAT)
(£21.63 Excl. 20% VAT)

in stock

Aluminium MK8 Bowden red right extruder upgrade kit

123-3D Aluminium MK8 Bowden red right extruder upgrade kit DEX00011

Description This red aluminium MK8 extruder upgrade kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

The extruder is suitable for filament with a diameter of 1.75mm.

Compatible with the following printers:
	●	Creality CR-10	●	Creality Ender-3
	●	Creality CR-10S	●	Creality Ender-3 Pro
	●	Creality CR-10S4	●	Creality CR-20
	●	Creality CR-10S5	●	Creality CR-20 Pro
	●	Creality CR-10 MINI	●	Creality Ender 5
	●	Creality Ender 5 Plus

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	aluminium	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DEX00011
Colour:	red

Order now, we can ship this tomorrow!

£19.75 (Incl. 20% VAT)
(£16.46 Excl. 20% VAT)

in stock

Aluminium MK8 Bowden black right extruder upgrade kit

123-3D Aluminium MK8 Bowden black right extruder upgrade kit DEX00013

Description This black aluminium MK8 extruder upgrade kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

The extruder is suitable for filament with a diameter of 1.75mm.

Compatible with the following printers:
	●	Creality CR-10	●	Creality Ender-3
	●	Creality CR-10S	●	Creality Ender-3 Pro
	●	Creality CR-10S4	●	Creality CR-20
	●	Creality CR-10S5	●	Creality CR-20 Pro
	●	Creality CR-10 MINI	●	Creality Ender 5
	●	Creality Ender 5 Plus

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	aluminium	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DEX00013
Colour:	black

Order now, we can ship this tomorrow!

£19.75 (Incl. 20% VAT)
(£16.46 Excl. 20% VAT)

in stock

Aluminium MK8 Bowden gold right extruder upgrade kit

123-3D Aluminium MK8 Bowden gold right extruder upgrade kit DEX00015

Description This gold Aluminium MK8 extruder upgrade kit replaces the original plastic extruder which is less durable and can lead to extrusion problems in the long run.

The extruder is suitable for filament with a diameter of 1.75mm.

Compatible with the following printers:
	●	Creality CR-10	●	Creality Ender-3
	●	Creality CR-10S	●	Creality Ender-3 Pro
	●	Creality CR-10S4	●	Creality CR-20
	●	Creality CR-10S5	●	Creality CR-20 Pro
	●	Creality CR-10 MINI	●	Creality Ender 5
	●	Creality Ender 5 Plus

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	aluminium	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DEX00015
Colour:	gold

Order now, we can ship this tomorrow!

£19.75 (Incl. 20% VAT)
(£16.46 Excl. 20% VAT)

in stock

Heated bed spring, 25mm (4-pack)

123-3D Heated bed spring, 25mm (4-pack) 400204003 DME00139

Description These heated bed springs are suitable as an upgrade or replacement of the original springs of your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Tunnel code:	n/a	Inner diameter:	5 mm
Length:	25 mm	Outer diameter:	8 mm
Colour:	orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00139

Order now, we can ship this tomorrow!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

Belt Tensioner 2020 X-axis for Ender 3 Pro

123-3D Belt Tensioner 2020 X-axis for Ender 3 Pro DME00223

Description With this handy belt tensioner kit, you can easily tension the belts of your 3D printer.

The belt tensioner is made of aluminium and is suitable for tensioning the X-axis of your Ender 3 Pro to prevent printing problems.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	aluminium	Our item no:	DME00223
Brand:	123-3D

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Heated bed spring, 30mm (4-pack)

123-3D Heated bed spring, 30mm (4-pack) DME00298

Description These heated bed springs are suitable as an upgrade or replacement of the original springs for your 3D printer.

With these stiffer springs, the bed will be more stable and less sensitive to vibrations and shocks. As a result, your bed needs to be levelled less often.

Specifications

Tunnel code:	n/a	Inner diameter:	5 mm
Length:	30 mm	Outer diameter:	8 mm
Colour:	orange	Hazard class:	n/a
Brand:	123-3D	Our item no:	DME00298

Order now, we can ship this tomorrow!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

Micro Swiss all metal hotend kit for CR-10 Ender 3D Printers

MicroSwiss Micro Swiss all metal hotend kit for CR-10 Ender 3D Printers M2583-04 DMS00021

Description This all metal hotend set from Micro Swiss for the Creality 3D Printers is the perfect upgrade for your 3D printer. This set can be installed on your Creality printer without any modification. The unique design of the heatsink makes the use of a heatbreak PTFE tube unnecessary and therefore ensures better heat dissipation.

The heatbreak is made of fifth-grade titanium alloy. This benefits the thermal insulation between the heater block and heatsink. Titanium is an extremely strong material and offers almost x3 lower thermal conductivity than stainless steel.

The kit contains the following parts:

Aluminium cooling block (heatsink)
Titanium heatbreak
Aluminium heater block
Brass Coated Nozzle for MK8 Hotend 1.75mm x 0.40mm
Silicone sock
Fastening parts

To install this set, please refer to the official installation video from Micro Swiss.

Compatible with the following printers:
		Creality CR-10		Creality CR-20		Creality Ender-5
		Creality CR-10 Mini		Creality CR-20 Pro		TronXY X5S
		Creality CR-10S		Creality Ender-2		Tevo Tornado
		Creality CR-10S4		Creality Ender-3
		Creality CR-10S5		Creality Ender-3 Pro

NOTE: Not suitable for the Creality CR-10 V2

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DMS00021

Order now, we can ship this tomorrow!

£64.50 (Incl. 20% VAT)
(£53.75 Excl. 20% VAT)

in stock

Micro Swiss heater block with silicone sock for CR-10 Printers

MicroSwiss Micro Swiss heater block with silicone sock for CR-10 Printers M2587 DMS00101

Description The Micro Swiss heater block with silicone sock is an upgrade for various Creality printers, among others.

Aluminium heater block
Silicone sock
Allen key

Compatible with the following printers:
		Creality CR-10-S5		Ender 2
		Creality CR-10-S4		Ender 3
		Creality CR-10S		TronXY X5S
		Creality CR-10 MINI		MK7, MK8, MK9 Hotends

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	aluminium	Our item no:	DMS00101
Brand:	Micro Swiss

£10.95 (Incl. 20% VAT)
(£9.13 Excl. 20% VAT)

14 day delivery

Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack)

MicroSwiss Micro Swiss silicone socks for MK7 / MK8 / MK9 hotends (3-pack) M2588 DMS00102

Description With these silicone socks you ensure a neat and clean printer head. The sock also ensures less heat radiation to the printed object, is more favourable for overhangs, bridges and ensures more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block. One sock lasts at least 100 printing hours.

Compatible with the following printers:
		Creality CR-10		MakerBot Replicator 1
		Creality CR-10S		MakerBot Replicator 2
		Creality CR-10S4		MakerBot Replicator 2x
		Creality CR-10S5		MakerBot Replicator 5th Gen
		Creality CR-10 MINI		MakerBot Replicator Mini
		Creality Ender-2		MakerBot Replicator z18
		Creality Ender-3		CraftBot 2
		Creality Ender-3 Pro		CraftBot PLUS
		Creality CR-20		BQ White box
		Creality CR-20 Pro		BQ Prusa I3 Hephestos
		Anet A6		TronXY X5S
		Anet A8		Tevo Tornado
		Alfawise U20		Micro Swiss All Metal Hotend for CR-10
		Alfawise U30		Micro Swiss All Metal Hotend for CR-10s Pro
		Prusa i3 MK2		anycubic
		Prusa i3 MK2S		Printers with a E3D V4 / V5 / V6 1.75 mm Hotend
		Prusa i3 MK3

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Material:	silicon	Hazard class:	n/a
Quantity:	3	Our item no:	DMS00102

Order now, we can ship this tomorrow!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

Creality 3D Silent Mainboard v4.2.7

Creality3D Creality 3D Silent Mainboard v4.2.7 4002020012 DRW00068

Description With this motherboard you can easily upgrade your Creality 3D printer. You only replace the motherboard within a few minutes, after which you can immediately start working with your improved 3D printer!

This upgrade improves the following performance:

The motherboard with TMC2225 driver makes your printer run a lot quieter
+50% printing precision
-40% power consumption

Other characteristics:

MCU 32 bit
Easy installation of your Antclabs BLTouch Leveling Sensor
Bootloader installed (ISP/USB Arduino)
Firmware 4.2.7 is preinstalled on this board
The board is pre-installed for the Ender-3, but also suitable for the Ender-3 V2, Ender-3 Pro and Ender 5.

CAUTION: Always install the latest firmware for your printer.

Please note we do not offer support on the installation of this product.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
On-board stepper drivers:	4	Our item no:	DRW00068
Brand:	Creality3D

Order now, we can ship this tomorrow!

£56.95 (Incl. 20% VAT)
(£47.46 Excl. 20% VAT)

in stock

Creality 3D aluminum stepper motor block

Creality3D Creality 3D aluminum stepper motor block DAR00435

Description Original upgrade for various Creality 3D printers. By using this block you will get improved heat dissipation and higher reliability of your Z-axis motor.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00435

£3.24 (Incl. 20% VAT)
(£2.70 Excl. 20% VAT)

14 day delivery

Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

MicroSwiss Micro Swiss NG Direct Drive Extruder for Creality CR-10 / Ender 3 Printers M3201 DAR00798

Description The NG Direct Drive Extruder from Micro Swiss is suitable for Creality CR-10 and Ender 3 printers. Thanks to the Bevel Gear design, the extruder has a short filament path of less than 41 mm. The placement of the motor allows for a very compact design with little overhang. This increases the rigidity of the system.

Further highlights:

Dual-gear drive made of hardened steel
3:1 gear ratio
Lightweight
Integrated with an all-metal hotend

This product contains:

Screws and wrenches
1x mounting plate
1x hot end
1x extension cable
1x Stepper Motor
1x Extruder Assembly
1x fan shroud

Specifications

Tunnel code:	n/a	Manual:	Manual
Filament diameter:	1.75 mm	Hazard class:	n/a
Brand:	Micro Swiss	Our item no:	DAR00798

£107.75 (Incl. 20% VAT)
(£89.79 Excl. 20% VAT)

14 day delivery

Creality 3D Pad mini 4.3" touchscreen

Creality3D Creality 3D Pad mini 4.3" touchscreen 4008030039 DAR00817

Description The Creality 3D pad mini allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. Combine the Pad mini with the 3D Digital Spool-C for real-time monitoring of filament weight. This way you can immediately see whether there is still enough filament available for your 3D print.

The 4.3 inch HD screen has a resolution of 480 x 272 pixels. On the side you will find a USB connection, so that the 3D printer can read Gcode files directly. The intelligent interface allows for a lot of personalisation, such as setting your own screensaver. The interface is also available in 11 languages.

The Creality 3D Pad mini is compatible with the following printers with a 32-bit mainboard:
Ender-3, Ender-3 Pro and the Ender-3 v2.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	124 x 108.2 x 21.2 mm	Weight:	0.27 kg
Colour:	black	Hazard class:	n/a
Voltage:	5 v	Our item no:	DAR00817

Order now, we can ship this tomorrow!

£43.00 (Incl. 20% VAT)
(£35.83 Excl. 20% VAT)

in stock

Creality 3D Pad 5" HD touchscreen

Creality3D Creality 3D Pad 5" HD touchscreen 4008030031 DAR00818

Description The Creality 3D pad allows you to visualise and track the progress of your 3D print. With a better view of the print model, you prevent errors earlier and the printing process becomes more intuitive. The 5 inch HD screen has 854 x 480 ppi and has a very high sensitivity. The touchscreen is suitable for all FDM 3D printers with Marlin firmware. Thanks to the Plug and Print principle, you can easily connect the Creality 3D pad to your 3D printer.

Properties:

Print effects: create texture with one click, e.g. with 3D prints of animals
Power Loss Resume: Keeping the Design
Filament Run-out Detection: no more blank prints
11+ languages available

The Creality Pad 5" is compatible with the following printers:
CR-10S, CR-10S Pro, CR-5 Pro, CR-5 Pro H, CP-01, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-7, CR-10 V3, CR-10 V2, CR-10 Max, CR-6 SE, CR-6 Max, CR-30, CR-X Pro and the CR-200B.

Specifications

Tunnel code:	n/a	Weight:	0.295 kg
Dimensions:	133.5 x 76.2 x 13.5 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00818
Brand:	Creality3D

£56.11 (sold out) (Incl. 20% VAT)
(£46.76 Excl. 20% VAT)

Creality 3D Sprite extruder pro kit, 300℃ high temperature

Creality3D Creality 3D Sprite extruder pro kit, 300℃ high temperature 4001020036 DAR00820

Description This Creality 3D Sprite extruder pro kit can be used to replace the original extruder pro kit if it is damaged or old. It is compatible with Creality 3D Sprite printers.

Specifications

Tunnel code:	n/a	Nozzle temp range:	0-300 °C
Dimensions:	54 x 50 x 64.3 mm	Brand:	Creality3D
Current rating:	0.8 A	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR00820

Order now, we can ship this tomorrow!

£86.50 (Incl. 20% VAT)
(£72.08 Excl. 20% VAT)

in stock

Creality 3D Spider high-temperature and high-speed hotend

Creality3D Creality 3D Spider high-temperature and high-speed hotend 4001030091 DAR00823

Description With the Spider high-temperature and high-speed hotend from Creality 3D you can print up to 250mm/s. The hotend can reach a maximum temperature of 500°C and is suitable for various filaments such as PLA, ABS, PETG, TPU, PP, PC and nylon.

This part is easy to install in your CR-10, CR-10 Mini, CR-10 V3, CR-10S, CR-10S4, CR-10S5, CR-20, CR-20 Pro, Ender-2, Ender-2 Pro, Ender-3, Ender-3 Max, Ender-3 Pro, Ender-3 S1, Ender-3 V2, Ender-4, Ender-5, Ender-5 Plus, Ender-5 Pro, Ender-6 and Ender-7 printers.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Max temp:	500 °C	Weight:	70 grams
Filament diameter:	1.75 mm	Hazard class:	n/a
Colour:	black	Our item no:	DAR00823

This product can be ordered 1 time(s).

£32.84 (sold out) (Incl. 20% VAT)
(£27.37 Excl. 20% VAT)

Creality 3D Dual lead screw upgrade kit

Creality3D Creality 3D Dual lead screw upgrade kit 4003010022 DAR00825

Description With this upgrade kit for the Creality Ender-3 series printers, you can quickly and easily give the printer an extra Z-axis to achieve even better print precision. This upgrade kit contains all necessary parts to connect and mount the kit.

Compatible with the following Creality Printers: Ender-3, Ender-3 Pro, Ender-3 v2, Ender-3 Neo and the Ender-3 v2 Neo.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00825
Weight:	0.83 kg

Order now, we can ship this tomorrow!

£25.66 (Incl. 20% VAT)
(£21.38 Excl. 20% VAT)

in stock

Mintion Beagleprint 3D Printer Camera (32GB)

Mintion Beagleprint 3D Printer Camera (32GB) DAR00873

Description Monitor and remotely control your 3D printer? The Mintion Beagleprint 3D Printer Camera makes it possible. The camera allows you to monitor and control printing processes remotely and in real time. If something goes wrong, you'll know right away. You can then simply stop printing using the app. This prevents a print from completely failing and filament being lost unnecessarily. Because the camera has a night mode, no extra lighting is needed when filming in the dark – useful if your printer also works overtime at night. So you save on energy!

An image is also made after printing each layer. And without any setting or command, the camera then generates a beautiful Time-lapse video. You can download this via the app or your PC. The camera is suitable for a large number of 3D printers.

Check here whether your printer is compatible.

Specifications

Tunnel code:	n/a	Network:	WiFi
Brand:	Mintion	Hazard class:	n/a
Storage:	32GB	Our item no:	DAR00873
Weight:	0.15 kg

Order now, we can ship this tomorrow!

£52.00 (Incl. 20% VAT)
(£43.33 Excl. 20% VAT)

in stock

Creality 3D Sonic Pad

Creality3D Creality 3D Sonic Pad 4005010052 DAR00885

Description With the Creality 3D Sonic Pad you can easily take the ease of use and speed of your 3D printer to a higher level.

This compact control pad runs on Klipper, an open-source 3D printer firmware. Klipper uses the additional computing power of Sonic Pad to support your printer's motherboard. As a result, the motors of your 3D printer are controlled faster and more accurately with smart algorithms. In this way vibrations and resonances are prevented and the end result remains of a very high quality, despite the higher printing speed.

The software and hardware of the Sonic Pad are fully coordinated and brought together in one integrated housing. The large 7 inch touch screen gives you easy access to the various functions and settings. If you are working with Creality Print, UTimaker Cura, Pursa Slicer or Super Slicer the screen can show G-Code model previews.

The Creality Sonic Pad works with almost every FDM 3D printer. You only need to connect the device to the tablet via a USB cable, after which you can configure the whole thing with the included manual. Are you using the Sonic Pad with an Ender-3 (V2, S1 or S1 Pro) 3D printer? Then the settings are already pre-configured and you can discover the possibilities almost immediately. You can also connect the Sonic Pad to your network and control it over the web. Connect a USB webcam and you can even check the progress of your print remotely.

Specifications

Tunnel code:	n/a	Weight:	0.46 kg
Dimensions:	222 x 128 x 40 mm	Standard WiFi connection:	802.11 b/g/n
Colour:	black	Hazard class:	n/a
Voltage:	12 v	Our item no:	DAR00885
Brand:	Creality3D

This product can be ordered 1 time(s).

Order now, we can ship this tomorrow!

£133.00 (Incl. 20% VAT)
(£110.83 Excl. 20% VAT)

in stock

Creality 3D Laser module 1.6W | 24V

Creality3D Creality 3D Laser module 1.6W | 24V 4001100023 DAR00961

Description Compatible Models:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Voltage:	24 v	Hazard class:	n/a
Power rating:	1,600 mw	Our item no:	DAR00961

£96.50 (Incl. 20% VAT)
(£80.42 Excl. 20% VAT)

14 day delivery

Creality 3D Laser module 5W | 24V

Creality3D Creality 3D Laser module 5W | 24V 4001100018 DAR00962

Description Open a world of extra possibilities by converting your 3D printer into a laser engraving machine with this Creality 3D Laser module 5 W. It is easy to install in just 60 seconds, without having to change the firmware. This makes this module very user-friendly. For quick calibration you can use the focus lens and lever. Gently push this lever down to focus accurately. When you have finished focusing, you can raise the lever again for safe storage.

Other functionalities
You can engrave accurately up to 0.06 mm thanks to the multi-lens technology of this module. The powerful engraving function goes effortlessly through a 0.05 mm sheet of balsa wood. In addition, this laser module offers the possibility of working with new materials, such as fabric, leather, PVC, ceramic and matt stainless steel.

When the 3D printer is offline, you can press the button on the control box to operate the laser module. You can preview, laser engrave and cut, or pause the current action. By using a TF card/MicroSD card you can also make beautiful creations without the 3D printer being connected to a computer.

Compatible with many different models of 3D printers:

Ender-2 Pro
Ender-3
Ender-3 Pro
Ender-3 Neo
Ender-3 Max Neo
Ender-3 S1 Max
Ender-3 V2
Ender-3 V2 Neo
CR-10
CR-10 Mini
CR-10S
CR20
CR20 Pro
Ender-3S
Ender-2

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Power rating:	5 W	Hazard class:	n/a
Voltage:	24 v	Our item no:	DAR00962

£141.00 (Incl. 20% VAT)
(£117.50 Excl. 20% VAT)

14 day delivery

Creality 3D E-Fit Extruder Kit Dual drive

Creality3D Creality 3D E-Fit Extruder Kit Dual drive 4001020054 DAR00963

Description The E-Fit kit is the perfect extruder upgrade for various models of Creality 3D printers. This powerful module is compact and suitable for both bowden and direct drive applications. The quick release design makes replacing filament a breeze, while the dual drive gears ensure perfect throughput.

The Creality E-Fit extruder kit is suitable for the following models of 3D printers:

Ender-3
Ender-3 V2
Ender-3 Pro
Ender-3 S
CR-10S
CR-10
CR-10 S5
CR-10 S4
CR-10 Mini
CR-20
CR-20 Pro

Contents of the package:

Back plate
Fan adapter plate
Tie wraps
Allen keys
Air passage
Screws
Connector
Silicone pad
PTFE tube
Motor cable

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DAR00963
Brand:	Creality3D

£29.50 (Incl. 20% VAT)
(£24.58 Excl. 20% VAT)

14 day delivery

Phaetus Dragonfly Hotend HIC HF

Phaetus Dragonfly Hotend HIC HF A168-01A-15-3 DAR00973

Description Create perfect details with the Phaetus Dragonfly Hotend HIC HF. Thanks to the High Impact Cooling technology, the heat from the hotend is optimally dissipated and the temperature remains stable. The hotend is made of hardened steel, making it wear-resistant. You can easily replace the nozzle and heat block, making maintenance and repair easy. The longer nozzle allows you to print even and smooth prints. The thin wall thickness of 0.25mm ensures good heat insulation and prevents filament clogging.

Specifications

Tunnel code:	n/a	Colour:	black
Dimensions:	26 x 21 x 57.5 mm	Brand:	Phaetus
Max operating temp:	350 °C	Weight:	0.07 kg
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DAR00973

£64.80 (Incl. 20% VAT)
(£54.00 Excl. 20% VAT)

14 day delivery

Creality 3D CR Touch Auto levelling kit

Creality3D Creality 3D CR Touch Auto levelling kit 4001010026 DAR01045

Description The Creality 3D CR Touch Auto levelling kit is a solution for automatically leveling your 3D printer. It performs multi-point detection on the bed and records the height of each detection point.

The CR Touch has a metal probe that reduces wear and significantly extends its life. It works with PEI, glass, metal, magnetic circuit boards, carborundum glass and other 3D printing platform materials.

It is easy to install and use. You just need to download firmware from Creality official website and copy it to TF/SD card. Insert the card directly into the card slot on the 3D printer. The program can be updated after power on.

The CR Touch only works on 3D printers with a 32-bit motherboard.

Specifications

Tunnel code:	n/a	Weight:	0.05 kg
Dimensions:	27 x 17.5 x 39.3 mm	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR01045

Order now, we can ship this tomorrow!

£43.50 (Incl. 20% VAT)
(£36.25 Excl. 20% VAT)

in stock

Creality 3D PEI bonding platform kit 235 x 235 x 2 mm

Creality3D Creality 3D PEI bonding platform kit 235 x 235 x 2 mm 4004090038 DAR01100

Description This magnetic PEI bonding platform kit from Creality is suitable for the following Creality printers:

Ender-3
Ender-3 Pro
Ender-3 V2

Ender-5 Pro
Ender-5

CR-20
CP-01

Use this set to replace your current bonding platform or as an additional build plate to continue printing quickly after your print is finished.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Dimensions:	235 x 235 x 2 mm	Our item no:	DAR01100
Brand:	Creality3D

Order now, we can ship this tomorrow!

£22.00 (Incl. 20% VAT)
(£18.33 Excl. 20% VAT)

in stock

Mintion Beagleprint V2 3D Printer Camera (32GB)

Mintion Beagleprint V2 3D Printer Camera (32GB) DAR01218

1
0

Description The Mintion Beagle V2 3D printer camera is based on its predecessor: the Beagle camera. The V2 has a focus lens that you adjust manually to get the best 1080P images. It has dual band WiFi at 2.4 GHz/5 GHz and a more powerful chipset than the original Beagle. This camera is compatible with many different printers, including the Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1 3D printers, the Anycubic Kobra 2 / Kobra Max / Vyper 3D printers and the Prusa MK3+ / MK4 3D printers

Plug and play
You don't need many steps to use this camera. Power the camera and connect it to the printer, download the Beagle app and create your account. Then scan the QR code to connect to the 2.4 G/5 G WiFi network. With the Beagle V2 camera it is possible to control multiple 3D printers simultaneously via the app.

At a distance
With the Beagle V2 and the Beagleprint app you can monitor your printing process in real time anywhere. When you see problems occurring, you can pause the printer to avoid unnecessary filament waste. The app will also notify you when the print is paused, paused or completed. The camera can also be used via the browser if they are both connected to the same LAN.

Time lapse
This camera comes with 4 different timelapse options: clean, normal, Beagle UV and timer. The 'clean' option will move the hotend and the PCB after a layer has been printed. This makes it appear as if the print is being printed by itself. With the 'normal' option, the hot end and the printed circuit board do not move after a layer has been printed. This will cause the hotend to be present in the timelapse video. To create a timelapse video from a resin print, you can use the 'Beagle UV' option. This works with a UV sensor to create the video. When the camera receives a signal from the UV sensor, it will be activated. If you want to make a timelapse video without the camera connected to the printer, you can use the 'timer' option.

Specifications

Tunnel code:	n/a	Network:	WiFi
Brand:	Mintion	Hazard class:	n/a
Storage:	32GB	Our item no:	DAR01218
Weight:	0.15 kg	Replaces item no:	DAR00873

£82.50 (sold out) (Incl. 20% VAT)
(£68.75 Excl. 20% VAT)

Creality 3D Sprite Extruder SE

Creality3D Creality 3D Sprite Extruder SE 4001020069 DAR01244

1
0

Description Push your creative boundaries with the Creality 3D Sprite Extruder SE, specially designed for the DIY enthusiast. This modular extruder is compact, without sacrificing power. The modular design makes it possible to easily adapt the extruder and upgrade it to a direct drive extruder. The dual gear drive structure ensures reliable and stable guidance of filament without damaging it. With the tensioner you can determine the pressure of the drive gear on the filament. This way you can fully customize this to your wishes and get the most out of your project.

The Sprite Extruder SE can work with various filaments, including PLA, PETG, ABS, TPU. This increases your creative possibilities even further. This extruder can be used with the Ender-3, Ender-3 V2, Ender-3 Pro, Ender-5, Ender-5 Pro, Ender-5 Plus and the CR-10.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	1.4 v	Printer extruder:	Direct
Max current:	0.8 A	Our item no:	DAR01244

Order now, we can ship this tomorrow!

£45.75 (Incl. 20% VAT)
(£38.13 Excl. 20% VAT)

in stock

Creality 3D Creality Wifi Box 2.0 (With MicroSD Card)

Creality3D Creality 3D Creality Wifi Box 2.0 (With MicroSD Card) 4005010045 DAR01274

3
2
1
0

Description Increase your 3D printing fun with the Creality WiFi box 2.0 from Creality 3D. By connecting to this you can control your 3D printer remotely in real time and monitor the status of your print via the Creality Cloud app. The box can be configured quickly and easily via Bluetooth. Finally, the printing history of the WiFi box can be uploaded to the cloud with just one click.

Specifications

Tunnel code:	n/a	Brand:	Creality3D
Dimensions:	90 x 64 x 20 mm	USB version:	USB 2.0
Material:	ABS	Network:	work ethernet WiFi
Current consumption:	2.4 A	Standard bluetooth connection:	4.0
Colour:	black	Hazard class:	n/a
Voltage:	5 v	Our item no:	DAR01274

£36.50 (Incl. 20% VAT)
(£30.42 Excl. 20% VAT)

14 day delivery

Creality 3D Spider Speedy Ceramic Hotend

Creality3D Creality 3D Spider Speedy Ceramic Hotend 4008030047 DAR01400

2
1
0

Description Upgrade your 3D printer with this Spider Speedy Ceramic Hotend from Creality 3D. The hotend heats up quickly and is specially designed for printing with a high flow. The hotend is resistant to high temperatures up to 300 °C and very easy to install. This hotend is compatible with the following 3D printers from Creality 3D:

CR-10	Ender-2	Ender-4
CR-10 Mini	Ender-2 Pro	Ender-5
CR-10 S4	Ender-3	Ender-5 Plus
CR-10 S5	Ender-3 Max	Ender-5 Pro
CR-10S	Ender-3 Pro	Ender-6
CR-20	Ender-3 V2
CR-20 Pro	Ender-3 S

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR01400
Weight:	0.05 kg

£79.60 (Incl. 20% VAT)
(£66.33 Excl. 20% VAT)

14 day delivery

Bondtech DDX V3 Direct Drive Extruder for Creality

Bondtech DDX V3 Direct Drive Extruder for Creality EXT-KIT-77-V3 DBO00054

Description This extruder has a double drive and therefore delivers high-quality prints. The extruder is suitable for Creality 3D printers and is compatible with hotends of almost any Creality model, but can also be upgraded to a Copperhead or Mosquito hotend. With this extruder you have more options for materials, higher flow and wider nozzles and thinner layers to achieve a higher print quality.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Bondtech	Our item no:	DBO00054

Order now, we can ship this tomorrow!

£93.50 (Incl. 20% VAT)
(£77.92 Excl. 20% VAT)

in stock

Bondtech Copperhead for Ender/CR-10(S) DDX PH2

Bondtech Copperhead for Ender/CR-10(S) DDX PH2 14265 DBO00096

Description Upgrade your Creality hotend with a real Copperhead heat Break and Hot Block to stage 2 of the DDX Direct Drive eXtruder. Turn your Creality hotend into a full metal hotend and prevent the deformation of PTFE at temperatures above 220°C. This Copperhead hotend upgrade for DDX PHase 2 on Creality uses the standard heat sink.

The standard nozzles do not fit on this hotend. You must upgrade the nozzles to the RepRap standard: M6x1x7.5×12.5.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DBO00096
Brand:	Bondtech

£64.50 (Incl. 20% VAT)
(£53.75 Excl. 20% VAT)

14 day delivery

Micro Swiss high temperature MK8 heater block upgrade

MicroSwiss Micro Swiss high temperature MK8 heater block upgrade M2802 DMS00122

Description The Micro Swiss heating block upgrade is made of a high-temperature copper-chrome-zirconium alloy allows you to reach temperatures of up to 500°C. This special alloy retains its strength at much higher temperatures compared to a normal copper alloy.

It is compatible with 100K thermistor, cartridge-style thermistors, thermocouple, PT100 and PT1000 sensors.

Specifications

Tunnel code:	n/a	Brand:	Micro Swiss
Dimensions:	21 x 20 x 10 mm	Hazard class:	n/a
Material:	copper	Our item no:	DMS00122
Screwthread type:	M6

Order now, we can ship this tomorrow!

£19.50 (Incl. 20% VAT)
(£16.25 Excl. 20% VAT)

in stock

Creality 3D Ender-3 (Pro) mainboard v4.2.2

Creality3D Creality 3D Ender-3 (Pro) mainboard v4.2.2 200101051 2002010011 4002020054 DRW00033

Description Can also be used for the following printers:
- Creality 3D Ender-5

Specifications

Tunnel code:	n/a	Hazard class:	n/a
On-board stepper drivers:	4	Our item no:	DRW00033
Brand:	Creality3D

£62.50 (sold out) (Incl. 20% VAT)
(£52.08 Excl. 20% VAT)

© 2024 - 123-3d.co.uk