1.75mm PLA glow in the dark Specialist PLA 1.75mm PLA Creality 3D CP-01 3-in-1 filament CP-01 3-in-1 Creality 3D Parts finder 3D printer parts 123-3D Filament glow in the dark green 1.75 mm PLA 1.1

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

Customer service closed from 12pm Xmas Eve - 2nd January

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

123-3D Filament glow in the dark green 1.75 mm PLA 1.1 kg

123-3D Filament glow in the dark green 1.75 mm PLA 1.1 kg DFP01056

4
3
2
1
0

Description Our green glow in the dark 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA Glow in the dark	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	195 - 235 °C	Our item no:	DFP01056
Amount:	1.1 kg	Replaces item no:	DFP11026
Brand:	123-3D

Order now - Ship by 2nd Jan

£23.50 (Incl. 20% VAT)
(£19.58 Excl. 20% VAT)

in stock

REAL glow-in-the-dark PLA filament 1.75mm, 0.5kg

REAL glow-in-the-dark PLA filament 1.75mm, 0.5kg DFG02000 DFG02000

Description With this Real glow-in-the dark PLA filament (1.75mm) you can create 3D objects that radiate green light in the dark. This makes projects with nice light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green glow in the dark	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFG02000
Length:	115 m

£14.66 (sold out) (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

REAL glow-in-the-dark PLA filament 1.75mm, 1kg

REAL glow-in-the-dark PLA filament 1.75mm, 1kg DFG02002 DFG02002

Description With this Real glow-in-the-dark PLA filament (1.75mm) you can create 3D objects that radiate green light in the dark. This makes projects with nice light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green glow in the dark	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFG02002
Length:	330 m

Order now - Ship by 2nd Jan

£28.01 (Incl. 20% VAT)
(£23.34 Excl. 20% VAT)

in stock

colorFabb glow-in-the-dark green Glowfill filament 1.75mm, 0.75kg

colorFabb glow-in-the-dark green Glowfill filament 1.75mm, 0.75kg DFP13158

Description Bring light into the darkness with the green colorFabb glow-in-the-dark filament. Glowfill has a beautiful, creamy white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 1.75mm. We recommend a print temperature of 195°C to 220°C and a print speed of 40 to 100mm/s.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	glow fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	green glow in the dark	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13158
Length:	80 m

£30.90 (Incl. 20% VAT)
(£25.75 Excl. 20% VAT)

Backorder - Due January

Polymaker PolyLite Luminous PLA Blue filament 1.75 mm 1 kg

Polymaker PolyLite Luminous PLA Blue filament 1.75 mm 1 kg PA02092 DFP14397

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is blue and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14397
Amount:	1 kg

Order now - Ship by 2nd Jan

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Green filament 1.75 mm 1 kg

Polymaker PolyLite Luminous PLA Green filament 1.75 mm 1 kg PA02091 DFP14399

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is green and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14399
Amount:	1 kg

Order now - Ship by 2nd Jan

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Orange filament 1.75 mm 1 kg

Polymaker PolyLite Luminous PLA Orange filament 1.75 mm 1 kg PA02090 DFP14398

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is orange and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	orange	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14398
Amount:	1 kg

Order now - Ship by 2nd Jan

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Yellow filament 1.75 mm 1 kg

Polymaker PolyLite Luminous PLA Yellow filament 1.75 mm 1 kg PA02093 DFP14401

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is yellow and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	yellow	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14401
Amount:	1 kg

Order now - Ship by 2nd Jan

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite green Glow in the Dark PLA filament 1.75mm, 1kg

Polymaker PolyLite green Glow in the Dark PLA filament 1.75mm, 1kg PA02012 DFP14248

Description Make your 3D prints stand out in the dark with the Polylite Glow in the Dark Green filament from Polymaker. The filament has good adhesion and does not warp. For optimal lighting in the dark, you can place your design in the sunlight or under UV light for at least 30 minutes. The filament is carefully wound around the spool to prevent tangling and is sealed in a resealable ziplock bag with desiccant.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green glow in the dark	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14248
Amount:	1 kg

Order now - Ship by 2nd Jan

£25.24 (Incl. 20% VAT)
(£21.03 Excl. 20% VAT)

in stock

eSun Luminous PLA filament 1.75 mm Rainbow 1 kg

eSun Luminous PLA filament 1.75 mm Rainbow 1 kg LuminousPLA175RB1 DFE20228

1
0

Description Luminous PLA filament Rainbow from eSun is a modified, multi-colored PLA filament with a beautiful rainbow effect. It is made of environmentally friendly material and easy to print with. The blending colors guarantee a striking and unique print. This makes it a perfect filament for decorative prints, toys, sculptures and clothing, for example.

The luminous effect is related to the intensity of the light and how long the print is in contact with the light source. The longer the print is exposed to the light, the better the effect is visible.

Note: We recommend using a steel or ruby nozzle with this filament in combination with a hard steel extruder. The luminous grains in this filament can lead to faster wear of the printer.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	Luminous PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	rainbow	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20228
Amount:	1 kg

Order now - Ship by 2nd Jan

£21.00 (Incl. 20% VAT)
(£17.50 Excl. 20% VAT)

in stock

eSun PLA filament 1.75 mm Luminous Blue 1 kg

eSun PLA filament 1.75 mm Luminous Blue 1 kg DFE20275

1
0

Description PLA filament Luminous Blue from eSun has the familiar properties of PLA as well as improved layer adhesion and strength. It is easy to print, environmentally friendly, rigid and resistant to impact. This also makes this filament an ideal choice for printing functional parts. The print will have a smooth surface, be difficult to break and be printed with high precision.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20275
Amount:	1 kg

Order now - Ship by 2nd Jan

£20.50 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

eSun PLA filament 1.75 mm Luminous Green 1 kg

eSun PLA filament 1.75 mm Luminous Green 1 kg 840249111057 DFE20277

1
0

Description PLA filament Luminous Green from eSun has the familiar properties of PLA as well as improved layer adhesion and strength. It is easy to print, environmentally friendly, rigid and resistant to impact. This also makes this filament an ideal choice for printing functional parts. The print will have a smooth surface, be difficult to break and be printed with high precision.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20277
Amount:	1 kg

Order now - Ship by 2nd Jan

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now - Ship by 2nd Jan

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

3DLAC stick (80ml) DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now - Ship by 2nd Jan

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml MO2018 DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now - Ship by 2nd Jan

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml MO2016 DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now - Ship by 2nd Jan

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

123-3D Filament Spool Holder DFR00005

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

Order now - Ship by 2nd Jan

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

123-3D cleaning filament 1.75mm, 100g DFR00000

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now - Ship by 2nd Jan

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

© 2024 - 123-3d.co.uk