Grey 1.75mm PLA CoLiDo X3045 Duo filament X3045 Duo CoLiDo Parts finder 3D printer parts 123-3D Filament grey 1.75mm PLA 1.1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament grey 1.75mm PLA 1.1kg DFP01050

2
1
0

Description Our grey 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	7011
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01050
Brand:	123-3D	Replaces item no:	DFP11020

Other Quantities

123-3D Filament grey 1.75mm PLA large 3 kg spool £43.05

123-3D Filament grey Bulk Pack 5 x 1.1kg 1.75mm PLA £75.00

Order now, we can ship this tomorrow!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D Filament grey 1.75 mm High Speed PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description This grey 1.75 mm High Speed PLA is ideal for use in combination with your High Speed printer. With this filament you can reach a speed of up to 600 mm/s, which is considerably faster than most high speed filaments (which only go up to 300 mm/s). High Speed PLA from 123-3D will significantly speed up your 3D printing process, without sacrificing the high quality you have come to expect from us.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA High Speed	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-65 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	215-240 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01184

Order now, we can ship this tomorrow!

£22.50 (Incl. 20% VAT)
(£18.75 Excl. 20% VAT)

in stock

123-3D Filament grey 1.75 mm PLA 3 kg

Zoom in

2
1
0

Description Our grey 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Note: This is 1 large 3kg spool of filament.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	RAL colour no:	7011
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	10.0 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP01051
Brand:	123-3D

Order now, we can ship this tomorrow!

£43.05 (Incl. 20% VAT)
(£35.88 Excl. 20% VAT)

in stock

123-3D Filament Dark Grey 1.75 mm PLA Tough 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description PLA Tough filament dark grey is specially designed to better withstand impact. The impact resistance and strength are comparable to ABS, while being combined with the stiffness and ease of use of PLA. You can easily print larger, strong and impact-resistant models with the environmentally friendly PLA Tough. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	6.8 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01146

Order now, we can ship this tomorrow!

£36.50 (Incl. 20% VAT)
(£30.42 Excl. 20% VAT)

in stock

123-3D Filament light grey 1.75mm PLA 1.1kg

Zoom in

2
1
0

Description Our light grey 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	7035
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	light grey	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01053
Brand:	123-3D	Replaces item no:	DFP11021

Order now, we can ship this tomorrow!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

REAL grey PLA filament 1.75mm, 0.5kg

Zoom in

Description The grey REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	7011
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	grey	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-215 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Length:	165 m	Our item no:	DFP02077

Order now, we can ship this tomorrow!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL grey PLA filament 1.75mm, 1kg

Zoom in

Description This grey REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	7011
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	grey	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-215 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP02008

Order now, we can ship this tomorrow!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL grey PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This grey PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA R	RAL colour no:	7009
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	grey	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-220 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP12045

Order now, we can ship this tomorrow!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL grey PLA Tough filament 1.75mm, 0.5kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP12018
Length:	165 m

Order now, we can ship this tomorrow!

£20.61 (Incl. 20% VAT)
(£17.18 Excl. 20% VAT)

in stock

REAL grey PLA Tough filament 1.75mm, 1kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP12012
Length:	330 m

Order now, we can ship this tomorrow!

£31.88 (Incl. 20% VAT)
(£26.57 Excl. 20% VAT)

in stock

REAL khaki green/grey PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This khaki green/grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02154
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 (Incl. 20% VAT)
(£15.23 Excl. 20% VAT)

in stock

SUNLU PLA Matte grey filament 1.75mm, 1kg

Zoom in

Description This 1kg spool of SUNLU matte grey PLA (1.75mm) has a matte, non-glossy finish. It is a polylactic acid filament that is made from renewable resources (like corn starch or sugarcane) and breaks down more easily than traditional plastics.

Matte PLA offers good print quality with less warping compared to regular PLA due to its chemistry and matte texture. It can produce detailed, matte-textured 3D printed objects. It requires similar print settings to regular PLA, like printing at 190-220°C with a cooled print bed. Overall, matte PLA provides an alternative material for 3D printing matte, detailed objects.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA	Outer diameter:	Ø 19.6 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	0-80 °C	Spool width:	6.0 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP16005
Amount:	1 kg

This product can be ordered 1 time(s).

Order now, we can ship this tomorrow!

£16.80 (Incl. 20% VAT)
(£14.00 Excl. 20% VAT)

in stock

REAL khaki green/grey PLA Matte filament 1.75mm, 1kg

Zoom in

Description This khaki green/grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02163
Length:	330 m

Order now, we can ship this tomorrow!

£25.46 (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

in stock

SUNLU PLA+ grey filament 1.75mm, 1kg

Zoom in

Description This 1kg spool of grey 1.75mm SUNLU PLA+ is PLA that has been enhanced with the addition of modifiers during PLA synthesis. PLA+ has superior flexibility, strength & ductility.

Items that have been 3D printed from SUNLU PLA+ have a smoother surface and also a better appearance than standard PLA.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA matte	Outer diameter:	Ø 19.6 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	70-80 °C	Spool width:	6.0 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP16002
Amount:	1 kg

Order now, we can ship this tomorrow!

£17.15 (Incl. 20% VAT)
(£14.29 Excl. 20% VAT)

in stock

REAL shadow grey PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This shadow grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02156
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 (Incl. 20% VAT)
(£15.23 Excl. 20% VAT)

in stock

REAL shadow grey PLA Matte filament 1.75mm, 1kg

Zoom in

Description This shadow grey PLA matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02165
Length:	330 m

Order now, we can ship this tomorrow!

£25.46 (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

in stock

Zortrax grey Z-PLA filament 1.75mm, 2kg

Zoom in

Description Zortrax Z-PLA 3D filament is made of environmentally friendly components. With this biodegradable filament you can easily print complex models with extreme precision and a smooth surface.

This Zortrax filament in the colour grey has a diameter of 1.75mm and a weight of ± 2000 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Spool width:	7.4 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP00157
Amount:	2 kg

£60.92 (sold out) (Incl. 20% VAT)
(£50.77 Excl. 20% VAT)

Zortrax cool grey Z-PLA Pro filament 1.75mm, 0.8kg

Zoom in

Description This Zortrax Z-PLA Pro 3D filament is made of environmentally friendly material and contains gypsum as an additive. With this biodegradable filament you can print models with an even, matte surface, making the details more visible. It is extremely suitable for printing large models, because the filament hardly shrinks or warps.

This Zortrax filament in the colour cool grey has a diameter of 1.75mm and a weight of ± 800 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	0-60 °C	Spool width:	5.7 cm
Colour:	cool grey	Hazard class:	n/a
Nozzle temp range:	202-212 °C	Our item no:	DFP00145
Amount:	0.8 kg

£42.32 (sold out) (Incl. 20% VAT)
(£35.27 Excl. 20% VAT)

Zortrax cool grey Z-PLA Pro filament 1.75mm, 2kg

Zoom in

Description This Zortrax Z-PLA Pro 3D filament is made of environmentally friendly material and contains gypsum as an additive. With this biodegradable filament you can print models with an even, matte surface, making the details more visible. It is extremely suitable for printing large models, because the filament hardly shrinks or warps.

This Zortrax filament in cool grey has a diameter of 1.75mm and a weight of ± 2000 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA Pro	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Spool width:	7.4 cm
Colour:	cool grey	Hazard class:	n/a
Nozzle temp range:	202-212 °C	Our item no:	DFP00144
Amount:	2 kg

£85.51 (sold out) (Incl. 20% VAT)
(£71.26 Excl. 20% VAT)

BASF Ultrafuse grey PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is grey and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	7045
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00107
Brand:	BASF

Order now, we can ship this tomorrow!

£23.20 (Incl. 20% VAT)
(£19.33 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 0.75kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF provides even faster and more consistent 3D printing. The sturdy and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually immune to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed objects, such as tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One Tough	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00176

Order now, we can ship this tomorrow!

£31.78 (Incl. 20% VAT)
(£26.48 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 2.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF provides even faster and more consistent 3D printing. The sturdy and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed objects, such as tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15 - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00179

Order now, we can ship this tomorrow!

£73.01 (Incl. 20% VAT)
(£60.84 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 4.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually immune to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.0 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00182

Order now, we can ship this tomorrow!

£139.80 (Incl. 20% VAT)
(£116.50 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 8.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually immune to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	0-60 °C	Spool width:	17.0 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00185

£244.00 (Incl. 20% VAT)
(£203.33 Excl. 20% VAT)

14 day delivery

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3 x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	grey/silver	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13020
Length:	250 m

Order now, we can ship this tomorrow!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

colorFabb dark grey LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and has a dark grey colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13251
Amount:	0.75 kg

£37.79 (Incl. 20% VAT)
(£31.49 Excl. 20% VAT)

14 day delivery

colorFabb LW-PLA-HT Filament Dark Gray 2.85 mm 0.75 kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85 mm and has a dark gray color.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13252
Amount:	0.75 kg

£39.40 (sold out) (Incl. 20% VAT)
(£32.83 Excl. 20% VAT)

colorFabb light grey PLA Economy filament 1.75mm, 2.2kg

Zoom in

Description This light grey colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13098
Length:	750 m

Order now, we can ship this tomorrow!

£36.95 (Incl. 20% VAT)
(£30.79 Excl. 20% VAT)

in stock

colorFabb blue-grey PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with this colorFabb PLA/PHA filament in the colour blue-grey. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. The blue-grey colour is perfect for creating neutral prints. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	blue grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13116
Length:	250 m

Order now, we can ship this tomorrow!

£18.25 (Incl. 20% VAT)
(£15.21 Excl. 20% VAT)

in stock

colorFabb steel Steelfill filament 1.75mm, 0.75kg

Zoom in

Description Give prints a robust, metal look with Steelfill colorFabb filament. Once the object has been printed, then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 0.75kg. We recommend a print temperature of 190°C to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	steel fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13161
Length:	80 m

Order now, we can ship this tomorrow!

£44.50 (Incl. 20% VAT)
(£37.08 Excl. 20% VAT)

in stock

colorFabb steel Steelfill filament 1.75mm, 1.5kg

Zoom in

Description Give prints a robust, metal look with Steelfil colorFabb filament. Once the object has been printed then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 1.5kg. We recommend a print temperature of 190 to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	steel fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	1.5 kg	Our item no:	DFP13160
Length:	160 m

Order now, we can ship this tomorrow!

£84.80 (Incl. 20% VAT)
(£70.67 Excl. 20% VAT)

in stock

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	stone fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13205

£31.40 (Incl. 20% VAT)
(£26.17 Excl. 20% VAT)

14 day delivery

eSun ePLA-Matte filament 1.75 mm Dark Gray 1 kg (paper spool)

Zoom in

Description This eSun ePLA-Matte filament in the color Dark Gray is an easy to print, odorless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	45-60 °C	Spool width:	6.4 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20252
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

eSun ePLA-Matte filament 1.75 mm Light Khaki 1 kg (paper spool)

Zoom in

Description This eSun ePLA-Matte filament in the color Light Khaki is an easy to print, odorless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	45-60 °C	Spool width:	6.4 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20253
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

eSun ePLA-ST filament 1.75 mm Gray 1 kg

Zoom in

1
0

Description This gray eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	200-230 °C	Our item no:	DFE20259
Amount:	1 kg

Order now, we can ship this tomorrow!

£18.75 (Incl. 20% VAT)
(£15.63 Excl. 20% VAT)

in stock

eSun grey PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Amount:	1 kg
Material:	PLA matte	Brand:	eSun
Filament diameter:	1.75 mm	Inner diameter:	Ø 9.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20211

Order now, we can ship this tomorrow!

£14.80 (Incl. 20% VAT)
(£12.33 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Grey 1kg

Zoom in

1
0

Description eSun's grey PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20094
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PLA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear grey colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190°C to 230°C. We recommend a temperature between 25°C and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14064

Order now, we can ship this tomorrow!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PLA filament 1.75mm, 3kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear grey colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14216

£69.98 (Incl. 20% VAT)
(£58.32 Excl. 20% VAT)

14 day delivery

Polymaker PolyLite PLA filament 1.75 mm Steel Gray 1 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75 mm and a steel gray color. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, down to the last detail. PLA filament is harder and shinier than ABS. The ideal printing temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14301

Order now, we can ship this tomorrow!

£24.80 (Incl. 20% VAT)
(£20.67 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite grey PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	30-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14253

Order now, we can ship this tomorrow!

£28.79 (Incl. 20% VAT)
(£23.99 Excl. 20% VAT)

in stock

Polymaker PolyLite Silk PLA filament 1.75 mm Chrome 1 kg

Zoom in

Description Print your designs with a glossy effect with the chrome PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. This makes the individual print layers on the side surfaces less visible, resulting in a smooth surface.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14336

Order now, we can ship this tomorrow!

£27.98 (Incl. 20% VAT)
(£23.32 Excl. 20% VAT)

in stock

Polymaker PolyMax grey PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright grey colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14102

Order now, we can ship this tomorrow!

£36.00 (Incl. 20% VAT)
(£30.00 Excl. 20% VAT)

in stock

Polymaker PolyMax grey PLA Tough filament 1.75mm, 3kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright grey colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14218

Order now, we can ship this tomorrow!

£145.05 (Incl. 20% VAT)
(£120.88 Excl. 20% VAT)

in stock

Polymaker PolySonic PLA filament 1.75 mm Gray 1 kg

Zoom in

Description PolySonic PLA filament from Polymaker is a real game changer in the world of 3D printing. This filament can be printed at very high speed without sacrificing quality. The fast extrusion, high precision and excellent layer adhesion allow you to get maximum benefit from your high-speed printer. Discover PolySonic PLA gray now and reduce your printing time without losing strength or quality.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14377

Order now, we can ship this tomorrow!

£28.59 (Incl. 20% VAT)
(£23.83 Excl. 20% VAT)

in stock

Polymaker PolyTerra fossil grey PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. This extra smooth PolyTerra filament in the colour 'Fossil Grey' has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	fossil grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14148

Order now, we can ship this tomorrow!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA filament 1.75 mm Fossil Gray 3 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. The extra smooth PolyTerra filament in the color 'Fossil Grey' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and for every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	fossil grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14354

Order now, we can ship this tomorrow!

£48.98 (Incl. 20% VAT)
(£40.82 Excl. 20% VAT)

in stock

Polymaker PolyTerra marble slate grey PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Marble Slate Gray' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	marble slate grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14233

Order now, we can ship this tomorrow!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra grey PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimised for better layer adhesion. The PolyTerra filament in the colour 'grey' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14244

Order now, we can ship this tomorrow!

£20.98 (Incl. 20% VAT)
(£17.48 Excl. 20% VAT)

in stock

Polymaker PolyTerra Dual PLA filament 1.75 mm Foggy Orange (Grey-Orange) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Foggy Orange color is orange on one side and gray on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14385
Amount:	1 kg

Order now, we can ship this tomorrow!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

Polymaker PolyTerra Dual PLA filament 1.75 mm Foggy Purple (Grey-Purple) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Foggy Purple color is purple on one side and gray on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14386
Amount:	1 kg

Order now, we can ship this tomorrow!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

MatX AMBX-PLA Antimicrobial filament Mouse Gray 1.75 mm 0.75 kg

Zoom in

1
0

Description Discover the revolutionary MatX AMBX-PLA Antimicrobial filament: a groundbreaking innovation in the world of safe 3D printing. This unique product stands out as the first 3D printer filament to provide effective antimicrobial properties without the use of harmful biocides. The MatX AMBX filament is anti-microbial and lab tests* show that it contains >99.99% fewer bacteria compared to standard PLA, the AMBX technology used is 100% safe for both humans and the environment.

This high-quality anti-microbial filament is ideal for printing:

Medical supplies
household applicationss

The MatX AMBX-PLA Antimicrobial filament in Mouse Gray is supplied on a transparent spool, compatible with all common 3D printers and material stations. For optimal life of the filament, we recommend storage in a dry and dark environment after use.

The MatX AMBX filament has a diameter of 1.75 mm and contains 0.75 kg of high-quality filament on a transparent spool. This innovative product guarantees safety, durability and excellent performance in 3D printing. With MatX AMBX you choose the future of antimicrobial and safe printing.

*Based on lab testing: ISO22196

Extra information:

Specifications

Tunnel code:	n/a	Nozzle temp range:	190-215
Material:	AMBX PLA	Amount:	0.75 kg
Filament diameter:	1.75 mm	Brand:	mATX
Heated bed temp:	0-60	Hazard class:	n/a
Colour:	grey	Our item no:	DFP15007

£49.80 (Incl. 20% VAT)
(£41.50 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Grey

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Grey