12V E3D sets E3D Extruder 3D printer parts Heaterblock insulation cotton 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

E3D v6 hotend complete kit with 1.75mm thermistor cartridge

E3D v6 hotend complete kit with 1.75mm thermistor cartridge DED00076

Description This complete v6 hotend kit for your RepRap 3D printer contains all parts for the v6 hotend (1.75mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached.

The kit contains the following original parts:

E3D thermistor cartridge 100k Ohm Semitec
E3D aluminium heater block
E3D heatbreak
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D aluminium heatsink
E3D silicone sock for v6 hotends ( 3 pack!)
Fasteners

The kit contains the following compatible parts:

Axial fan 30 x 30 x 10mm 12V
Ceramic Heating Cartridge 12V 40W
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting:
#TEMP_SENSOR_N 5

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00076
Nozzle diameter:	0.4 mm

Order now, we can ship this tomorrow!

£76.50 (Incl. 20% VAT)
(£63.75 Excl. 20% VAT)

in stock

E3D v6 hotend complete kit with bowden 1.75mm thermistor cartridge

E3D v6 hotend complete kit with bowden 1.75mm thermistor cartridge DED00077

Description This complete v6 hotend kit for your RepRap 3D printer contains all parts for the v6 hotend (1.75mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached.

The kit contains the following parts:

E3D thermistor cartridge 100k Ohm Semitec
E3D aluminium heater block
E3D heatbreak
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D aluminium heatsink
E3D silicone sock for v6 hotends (3 pack!)
E3D v6 Bowden clutch 1.75mm

The kit contains the following compatible parts:

Axial fan 30 x 30 x 10mm 12V
Ceramic Heating Cartridge 12V 40W
Fasteners
PTFE tube, 80cm

For the Marlin firmware you need the following thermistor setting:
#TEMP_SENSOR_N 5

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00077
Nozzle diameter:	0.4 mm

Order now, we can ship this tomorrow!

£78.50 (Incl. 20% VAT)
(£65.42 Excl. 20% VAT)

in stock

E3D v6 hotend complete kit with 1.75mm, 12V thermistor cartridge

E3D v6 hotend complete kit with 1.75mm, 12V thermistor cartridge DED00078

Description This complete v6 hotend kit for your RepRap 3D printer contains all the parts for the v6 hotend (1.75mm), which allows printing at higher temperatures. The hotend kit comes with a thermocouple, capable of reaching temperatures of up to 400°C (additional electronics may be required to support this).

The kit contains the following parts:

E3D aluminium heater block
E3D heatbreak
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (3 pack!)
E3D aluminium heatsink

The kit contains the following compatible parts:

Thermocouple type K cartridge 1m
Axial fan 30 x 30 x 10mm 12V
Ceramic heating cartridge 12V
PTFE tube, 10cm
Fasteners

For the Marlin firmware you need the following thermistor setting: #TEMP_SENSOR_N 5

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	400 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00078
Nozzle diameter:	0.4 mm

Order directly

External thermocouple board v1.2 - £10.95

£78.50 (sold out) (Incl. 20% VAT)
(£65.42 Excl. 20% VAT)

E3D V6 Lite6 direct hotend kit, 1.75mm

E3D V6 Lite6 direct hotend kit, 1.75mm DED00045

Description The E3D lite hotend is the ideal hotend for standard 3D printing applications with PLA and ABS filament. The Lite6 is the little brother of the V6 and suitable for standard materials. Unlike the V6, Lite6's PTFE tube runs all the way through, so that it can easily be replaced in the event of a defect or jam.

Below are the main specs of the Lite6:

Print speed of 20-50mm/s;
Easy to use;
Suitable for filament with a diameter of 1.75mm;
Compatible with V6 nozzles, Volcano and Bowden systems;
Maximum temperature 245°C (PLA & ABS).

The kit consists of the following original parts:

E3D Heatsink with Bowden coupling (original)
E3D Aluminium heater block (original)
E3D Brass nozzle (0.4mm) (original)
E3D Thermistor cartridge 100k Ohm Semitec (original)
E3D Injection molded fan duct (colour: red)
E3D Fasteners (original)
E3D Silicone sock for V6 hotends (original)
Ceramic heating element 12V/30W (original)
Axial fan 30 x 30 x 10mm 12V
PTFE tube, 10cm

For the Marlin firmware you need the following thermistor setting: #TEMP_SENSOR_N 5

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	245 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00045

£47.95 (Incl. 20% VAT)
(£39.96 Excl. 20% VAT)

14 day delivery

E3D V6 universal hotend 1.75mm (only metal parts)

E3D V6 universal hotend 1.75mm (only metal parts) V6-175-MO DED00024

Description This kit contains only the metal hotend parts and is intended for users with some experience and/or in possession of their own parts. Electronic components and the PTFE tube are not included. The kit is ideal for upgrading your 3D printer to an E3D V6 hotend. The heatsink has an integrated Bowden coupling.

The kit contains the following components:

E3D V6 aluminium heatsink 1.75mm
E3D V6 aluminium heater block
E3D V6 heatbreak 1.75mm
E3D V6 brass nozzle 1.75mm x 0.4mm
E3D V6 spare fasteners

This kit can be used in both a Bowden and a direct drive setup.

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	400 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00024
Nozzle diameter:	0.4 mm

Order now, we can ship this tomorrow!

£38.95 (Incl. 20% VAT)
(£32.46 Excl. 20% VAT)

in stock

E3D V6 All-Metal hotend kit | 12V Bowden, 2.85mm

E3D V6 All-Metal hotend kit | 12V Bowden, 2.85mm V6-300-B DED00296

Description This complete V6 hotend kit (12V Bowden) for your 3D printer contains all parts for the v6 hotend (2.85mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic Heating Cartridge 12V
E3D v6 Bowden clutch 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Tunnel code:	n/a	Brand:	E3D
Filament diameter:	2.85 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DED00296

£60.48 (sold out) (Incl. 20% VAT)
(£50.40 Excl. 20% VAT)

E3D V6 All-Metal hotend kit | 12V Direct Drive, 2.85mm

E3D V6 All-Metal hotend kit | 12V Direct Drive, 2.85mm V6-300-D DED00298

Description This complete V6 hotend kit (12V Direct Drive) for your 3D printer contains all parts for the v6 hotend (2.85 mm). This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

E3D Thermistor cartridge
E3D aluminum heater block
E3D heat sink
E3D heat break
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
E3D silicone sock for v6 hotends (1 piece)
E3D Ceramic Heating Cartridge 12V
E3D v6 Direct Drive coupling 2.85mm
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Tunnel code:	n/a	Brand:	E3D
Filament diameter:	2.85 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DED00298

£56.13 (sold out) (Incl. 20% VAT)
(£46.78 Excl. 20% VAT)

E3D V6 Gold Edition hotend kit | 12V Bowden, 1.75mm

E3D V6 Gold Edition hotend kit | 12V Bowden, 1.75mm V6-175-GOLD-12V DED00300

Description The V6 Gold Edition HotEnd Kit 1.75mm 12V Bowden from E3D is suitable for high temperatures (maximum 285°C). Thanks to the gold-plated copper block, the heat transfer to the filament increases. This reduces the chance that filament residues will stick to the hotend. The brass nozzle is made of hardened steel. Do you print with carbon fiber, wood/metal filled filaments or even glow-in-the-dark filaments? Then these nozzles are ideal. The heating elements are precise and quick disconnect cartridges. The shortcuts allow you to remove the hotend easily.

This kit contains:

Gold anodized HeatSink 1.75mm
V6 HeatBreak 1.75mm
Hardened steel nozzle 1.75mm x 0.4mm
Thermistor cartridge
Thermistor extension cable
Heating cartridge 12V
30mm x 30mm x 10mm 12V
V6 clear fan duct
V6 mounting kit
V6 plated copper heating block
Capricorn tube 100mm
thermal paste
collet
collet clamp

Specifications

Tunnel code:	n/a	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Voltage:	12 v	Our item no:	DED00300

£94.50 (Incl. 20% VAT)
(£78.75 Excl. 20% VAT)

14 day delivery

E3D copper Volcano upgrade kit 12V 1.75mm

E3D copper Volcano upgrade kit 12V 1.75mm DED00217

Description This E3D Volcano Plated Copper Upgrade Kit is designed for high temperatures. This makes it possible to print materials such as Nylon, Polycarbocate and Peek and regular materials such as PLA and ABS are also still suitable for printing with this high-quality Volcano hot-end.

This set can also be combined with the PT100 upgrade kit from E3D, allowing an even higher accuracy in temperature detection.

The kit contains the following parts:

Volcano copper plated block
Volcano copper plated nozzle - 0.8mm
Molex cable 1000
Thermistor cartridge
Thermal pasta
V6 mounting kit
Highly accurate heater cartridge - 100cm

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	copper	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00217
Voltage:	12 v

£77.50 (sold out) (Incl. 20% VAT)
(£64.58 Excl. 20% VAT)

E3D Plated Copper Volcano Upgrade Kit 1.75mm 12v

E3D Plated Copper Volcano Upgrade Kit 1.75mm 12v VOLCANO-STARTER-COP-12V-175 DED00283

Description The copper plated E3D Volcano upgrade set improves the performance of a printer's hotend. Thanks to the copper plating, the hotend can easily be heated up to 285ᵒC with an expandability of up to 500ᵒC. An additional advantage of copper plating is that the heat conductivity is three times higher than that of brass. This means that the relative retention of heat is three times greater. This ensures that there is a more constant temperature, which promotes the flow of filament.

Kit includes copper plated heating pad, mounting kit, 0.8mm copper plated 1.75 nozzle, 30W standard 12v heating element, Thermistor cartridge along with extension lead, thermal paste and cable tie.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	copper	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00283
Voltage:	12 v

£74.50 (Incl. 20% VAT)
(£62.08 Excl. 20% VAT)

14 day delivery

E3D Volcano upgrade kit | 12V, 1.75mm

E3D Volcano upgrade kit | 12V, 1.75mm VOLCANO-STARTER-12V-175 DED00285

Description The Volcano 12V upgrade kit (1.75 mm) from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x 0.8mm brass Volcano nozzle

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	285 °C	Hazard class:	n/a
Voltage:	12 v	Our item no:	DED00285

£31.76 (Incl. 20% VAT)
(£26.47 Excl. 20% VAT)

14 day delivery

E3D Volcano Eruption upgrade kit | 12V, 1.75mm

E3D Volcano Eruption upgrade kit | 12V, 1.75mm VOLCANO-ERUPTION-12V-175 DED00290

Description The Volcano Eruption upgrade kit 1.75 mm 12V from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is rated for a maximum printing temperature of 285°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x universal V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge
1x extension cable
1x tie wrap
1x Volcano heater block
1x brass Volcano nozzles: 0.60/0.80/1.00/1.20mm

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	285 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00290
Voltage:	12 v

£43.00 (Incl. 20% VAT)
(£35.83 Excl. 20% VAT)

14 day delivery

E3D Volcano hotend kit | 12V Direct Drive, 1.75mm

E3D Volcano hotend kit | 12V Direct Drive, 1.75mm VOLCANO-175 DED00294

Description The Volcano HotEnd kit 1.75 mm 12V Direct Drive from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm direct
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 12V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30mm x 30mm x 10mm fan 12V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00294
Voltage:	12 v

£60.48 (Incl. 20% VAT)
(£50.40 Excl. 20% VAT)

14 day delivery

E3D Volcano hotend kit | 12V, 1.75mm (with Bowden add-on)

E3D Volcano hotend kit | 12V, 1.75mm (with Bowden add-on) VOLCANO-175-B DED00292

Description The Volcano HotEnd kit 1.75 mm 12V (with bowden add-on) from E3D ensures that your 3D printer can print larger and stronger parts even faster. The kit is therefore extremely suitable for a printer with a large build volume. The part is suitable for a maximum printing temperature of 300°C and is compatible with the E3D ecosystem.

The kit contains the following parts:

1x V6 heatsink 1.75mm bowden
1x Volcano aluminum heater block
1x stainless steel heat break
1x brass Volcano nozzle
1x V6 mounting kit
1x thermistor cartridge
1x 30W heating cartridge 12V
1x extension cable
1x Collet Clamp
1x PTFE tube
1x V6 fan duct
1x 30 x 30 x 10 mm fan 12V
1x M3 set screw
1x M3 ring
1x thermal paste
1x Volcano sock
1x cable tie

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00292
Voltage:	12 v

£64.50 (Incl. 20% VAT)
(£53.75 Excl. 20% VAT)

14 day delivery

E3D Super Volcano upgrade kit 1.75mm (1mm nozzle)

E3D Super Volcano upgrade kit 1.75mm (1mm nozzle) SUPER-STARTER-12V-175 DED00224

Description The E3D Super Volcano Upgrade Kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hotend is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300°C. To print materials with a melting temperature above 300°C, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 12V, brass nozzle 1.75mm, thermal paste and a mosfet with accompanying wiring.

Specifications

Tunnel code:	n/a	Brand:	E3D
Power rating:	80 W	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00224
Voltage:	12 v

£130.00 (sold out) (Incl. 20% VAT)
(£108.33 Excl. 20% VAT)

E3D Super Volcano Upgrade Starter Kit 1.75mm 12v (0.8mm, 1mm, 1.2mm, 1.4mm nozzle)

E3D Super Volcano Upgrade Starter Kit 1.75mm 12v (0.8mm, 1mm, 1.2mm, 1.4mm nozzle) SUPER-ERUPTION-12V-175 DED00282

Description The E3D Super Volcano Upgrade Kit is a kit intended for the print enthusiasts who want to print with a higher speed or better consistency. The hotend is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300°C. To print materials with a melting temperature above 300°C, the Thermistor can easily be exchanged for a higher one.

The set includes a copper plated Heater block with Thermistor cartridge and extension cable, a SuperVolcano sock, 80Watt Heater cartridge 12V, Brass nozzle 1.75mm, Thermal paste and a mosfet with accompanying wiring. The starter kit comes with an extra set of nozzles. These come in the sizes 0.8mm, 1.0mm, 1.2mm and 1.4mm

Specifications

Tunnel code:	n/a	Brand:	E3D
Power rating:	80 W	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00282
Voltage:	12 v

£145.50 (sold out) (Incl. 20% VAT)
(£121.25 Excl. 20% VAT)

E3D Super Volcano upgrade kit 2.85mm (1mm nozzle)

E3D Super Volcano upgrade kit 2.85mm (1mm nozzle) E3D-SUPER-STARTER-12V-300 DED00225

Description The E3D Super Volcano upgrade kit is a kit intended for print enthusiasts who want to print with a higher speed or better consistency. The hotend is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300°C. To print materials with a melting temperature above 300°C, the thermistor can easily be exchanged for a higher one.

The set includes a copper plated heater block with thermistor cartridge and extension cable, a Super Volcano sock, 80Watt heater cartridge 12V, brass nozzle 2.85mm, thermal paste and a mosfet with accompanying wiring.

Specifications

Tunnel code:	n/a	Brand:	E3D
Power rating:	80 W	Hazard class:	n/a
Filament diameter:	2.85 mm	Our item no:	DED00225
Voltage:	12 v

£101.50 (sold out) (Incl. 20% VAT)
(£84.58 Excl. 20% VAT)

E3D Super Volcano Upgrade Starter Kit 2.85mm 12v (.8, 1, 1.2, 1.4mm nozzle)

E3D Super Volcano Upgrade Starter Kit 2.85mm 12v (.8, 1, 1.2, 1.4mm nozzle) SUPER-ERUPTION-12V-300 DED00226

Description The E3D Super Volcano Upgrade Kit is a kit intended for the print enthusiasts who want to print with a higher speed or better consistency. The hotend is longer than usual and therefore offers not only greater consistency and speed, but also allows you to print materials that have a melting temperature of up to 300°C. To print materials with a melting temperature above 300°C, the Thermistor can easily be exchanged for a higher one.

The set includes a copper plated Heater block with Thermistor cartridge and extension cable, A SuperVolcano sock, 80Watt Heater cartridge 12V, Brass nozzle 2.85mm, Thermal paste and a mosfet with accompanying wiring. The starter kit comes with an extra set of nozzles. These come in sizes 0.8mm, 1.0mm, 1.2mm and 1.4mm

Specifications

Tunnel code:	n/a	Brand:	E3D
Power rating:	80 W	Hazard class:	n/a
Filament diameter:	2.85 mm	Our item no:	DED00226
Voltage:	12 v

£136.50 (sold out) (Incl. 20% VAT)
(£113.75 Excl. 20% VAT)

E3D V6 complete hotend kit 1.75mm, 12V

E3D V6 complete hotend kit 1.75mm, 12V DED00022

Description This complete V6 hotend kit for your RepRap 3D printer contains all the parts for the V6 hotend (1.75mm), which allows printing at higher temperatures. The hotend kit comes with a thermocouple, capable of reaching temperatures of up to 400°C (additional electronics may be required to support this).

The kit contains the following parts:

E3D aluminium heater block
E3D heatbreak
E3D brass nozzle (0.4mm)
E3D injection molded fan duct
Axial fan 30 x 30 x 10mm 12V
Thermocouple type K
Ceramic heating cartridge 12V
E3D aluminium heat sink
PTFE tube, 10cm
Fasteners

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	400 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00022
Nozzle diameter:	0.4 mm

Order directly

External thermocouple board v1.2 - £10.95

£75.50 (sold out) (Incl. 20% VAT)
(£62.92 Excl. 20% VAT)

E3D V6 silicone sock pro for hotends (3-pack)

E3D V6 silicone sock pro for hotends (3-pack) V6-SOCK-PRO-3PACK DED00072

Description With these silicone socks you can ensure a cleaner printer nozzle. The sock also ensures less heat radiation to the printed object, more favourable for overhangs, bridges and more accurate temperature behaviour.

The sock is suitable for the cartridge type heater block and fits nozzles from 0.25mm - 0.8mm. One sock lasts for at least 100 printing hours.

This pro version is extra tight around the nozzle.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	blue	Our item no:	DED00072
Brand:	E3D

Order now, we can ship this tomorrow!

£4.80 (Incl. 20% VAT)
(£4.00 Excl. 20% VAT)

in stock

E3D Prusa V6 Hotend Kit 12V (MK2)

E3D Prusa V6 Hotend Kit 12V (MK2) PRUSA-V6-175-12V-AS DED00254

Description The E3D Prusa V6 mk2 is a 12 volt Prusa compatible hotend. Thanks in part to the 40W heater cartridge, the V6 hotend is able to print at temperatures up to 300ᵒC. The kit includes a 40W 12 volt Heater and Thermistor Cartridge, an aluminum V6 heater block, an aluminum heatbrake and a collet with collet clip.

Specifications

Tunnel code:	n/a	Voltage:	12 v
Max temp:	300 °C	Brand:	E3D
Power rating:	40 W	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00254
Nozzle diameter:	0.4 mm

£69.95 (Incl. 20% VAT)
(£58.29 Excl. 20% VAT)

14 day delivery

E3D V6 Chimera+ extruder kit | 12V, 1.75mm

E3D V6 Chimera+ extruder kit | 12V, 1.75mm MULTI-CHIMERA-PLUS-12V DED00146

Description The E3D Chimera+ is a 12V air-cooled 2-in, 2-out extruder kit. This set is only for 1.75mm Bowden printers. The nozzles can be individually adjusted in height and temperature.

The kit contains the following parts:

2 x E3D blue plastic collet clips
2 x E3D black plastic collets
2 x E3D silicone sock
2 x E3D v6 nozzle brass 1.75mm x 0.40mm
2 x E3D v6 heater block
2 x E3D heater cartridge 12V 30W
2 x E3D thermistor cartridge
E3D air-cooled heatsink
800mm PTFE Bowden tube
12V 30 x 30 x 10mm fan
Thermal paste
Mounting kit

You can view the technical specifications here.

Specifications

Tunnel code:	n/a	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00146
Voltage:	12 v

£131.50 (Incl. 20% VAT)
(£109.58 Excl. 20% VAT)

14 day delivery

E3D V6 Cyclops+ extruder kit | 1.75mm, 12V

E3D V6 Cyclops+ extruder kit | 1.75mm, 12V DED00147

Description The E3D Cyclops+ is a 12V air-cooled 2 in, 1 out extruder kit. This set is only for 1.75mm Bowden printers. The 2-in 1-out method makes this kit easier to set up than a 2-in 1-out setup. Because this kit only uses 1 nozzle, you will never have problems with a leaking second nozzle.

The kit contains the following parts:

E3D air-cooled heatsink
2 x E3D black plastic collets
2 x E3D blue plastic collet clips
Cyclops+ mounting kit
80cm PTFE Bowden tube
12V 30 x 30 x 10mm fan
E3D v6 brass nozzle 1.75mm x 0.40mm
E3D Cyclops heater block
2 x E3D Kraken heatbreaks
Thermal paste
E3D heater cartridge 12V 30W
E3D thermistor cartridge

You can view the technical specifications here.

Specifications

Tunnel code:	n/a	Brand:	E3D
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00147
Voltage:	12 v

£117.95 (Incl. 20% VAT)
(£98.29 Excl. 20% VAT)

14 day delivery

Heaterblock insulation cotton

123-3D Heaterblock insulation cotton DVB00017

Description This 3mm thick insulation cotton is suitable to insulate your heater block so that less heat is lost. This keeps the temperature of your hotend more stable, which in turn results in better prints.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	75 x 21 mm	Hazard class:	n/a
Thickness:	3 mm	Our item no:	DVB00017

Order now, we can ship this tomorrow!

£0.95 (Incl. 20% VAT)
(£0.79 Excl. 20% VAT)

in stock

E3D V6 Lite6 direct hotend kit | 12V 1.75mm

E3D V6 Lite6 direct hotend kit | 12V 1.75mm E3DDIRECT175LITE DED00160

Description This set contains the following products:
- E3D Lite - Heatsink 1.75mm
- E3D V6 - Heater block including spare fixings (cartridge version)
- E3D V6 - Brass nozzle - 0.40mm /1.75mm
- E3D Axial fan 30 x 30 x 10mm (12V)
- E3D V6 - Red injection molded fan duct
- E3D V6 - Embedded Bowden plug fitting (1.75mm)
- E3D Thermistor cartridge + cable
- E3D Ceramic heater cartridge 12V/30W (100cm)
- E3D V6 - Blue silicone sock

Specifications

Tunnel code:	n/a	Brand:	E3D
Max operating temp:	245 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00160

£36.50 (sold out) (Incl. 20% VAT)
(£30.42 Excl. 20% VAT)

E3D v6 hotend kit | 12V Direct, 1.75mm Universal

E3D v6 hotend kit | 12V Direct, 1.75mm Universal V6-175 DED00302

Description This complete v6 hotend kit - 1.75mm Universal (Direct) (12V) for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 12V
PTFE tube, 10 cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00302
Voltage:	12 v

£56.13 (Incl. 20% VAT)
(£46.78 Excl. 20% VAT)

14 day delivery

E3D v6 hot end complete kit | 12V, 1.75mm Universal (with Bowden add-on)

E3D v6 hot end complete kit | 12V, 1.75mm Universal (with Bowden add-on) V6-175-B DED00304

Description This complete v6 hot end complete kit - 1.75mm Universal (with Bowden add-on) (12V) from E3D for your 3D printer contains all the parts for the v6 hotend. This allows printing at higher temperatures. The hotend kit comes with a thermistor cartridge, with which temperatures up to 300°C can be reached. A wide range of filaments can be used, allowing experimentation with advanced materials and printing in different resolutions and sizes.

The kit contains the following parts:

Thermistor cartridge
V6 Aluminum heater block
V6 heatsink
V6 heat break
V6 brass nozzle (0.4mm)
V6 duct
V6 silicone sock
Ceramic heating cartridge 12V
PTFE tube, 10cm
Fan 30mm x 30mm x 10mm 12V
Fasteners
extension cable

Specifications

Tunnel code:	n/a	Brand:	E3D
Max temp:	300 °C	Hazard class:	n/a
Filament diameter:	1.75 mm	Our item no:	DED00304
Voltage:	12 v

£60.00 (Incl. 20% VAT)
(£50.00 Excl. 20% VAT)

14 day delivery

E3D v6 upgrade kit heaterblock & silicone sock

E3D v6 upgrade kit heaterblock & silicone sock V6-BLOCK-SOCK-KIT DED00250

Description This v6 aluminum heater block kit allows you to upgrade an old style clamp mount block for use with cartridge thermistors. Supplied with an M3 set screw for the thermistor cartridge and an M3 button head screw to clamp the heater cartridge.

This kit includes;

1 x V6 aluminum heater block
1 x V6 Standard Sock
1 x Thermistor Cartridge
1 x thermistor extension cable
1 x V6 mounting kit

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Max temp:	285 °C	Our item no:	DED00250
Brand:	E3D

£19.58 (Incl. 20% VAT)
(£16.32 Excl. 20% VAT)

14 day delivery

Capricorn XS heatbreak liner, 2mm x 3mm (300mm)

Capricorn XS heatbreak liner, 2mm x 3mm (300mm) DBW00066

Description The Capricorn XS heatbreak liner is specially made to fit perfectly in the heatbreak. The liner is also 30cm long so you can provide for 10 heatbreaks.

Specifications

Tunnel code:	n/a	Brand:	Capricorn
Material:	PTFE	Inner diameter:	2 mm
Filament diameter:	1.75 mm	Outer diameter:	3 mm
Colour:	dark blue	Hazard class:	n/a
Length:	30 cm	Our item no:	DBW00066

Order now, we can ship this tomorrow!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

© 2024 - 123-3d.co.uk