Motherboards Electronics 3D printer parts Minitronics v2.0 32-bit 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

Description Original motherboard for your Voxelab 3D printer.
The motherboard is equipped with silent stepper drivers.

Specifications

Voltage:	24 v	Hazard class:	n/a
Brand:	Voxelab	Our item no:	DAR00488

£56.95 (Incl. 20% VAT)
(£47.46 Excl. 20% VAT)

14 day delivery

Wrecklab PrintHat v2

Zoom in

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Brand:	Wrecklab	Our item no:	DAR00354
Hazard class:	n/a

£86.59 (Incl. 20% VAT)
(£72.16 Excl. 20% VAT)

14 day delivery

Anycubic Photon Mono Motherboard

Zoom in

Description Original Anycubic mainboard for the Anycubic Photon Mono 3D printer. With this motherboard you can replace the defective board of your printer in no time.

Specifications

Brand:	Anycubic	Our item no:	DAR00502
Hazard class:	n/a

£39.00 (Incl. 20% VAT)
(£32.50 Excl. 20% VAT)

14 day delivery

Anycubic Photon Mono X motherboard

Zoom in

Description This Anycubic Photon Mono X motherboard is a replacement for the original motherboard. It is compatible with Anycubic Photon Mono X printers.

Specifications

Brand:	Anycubic	Our item no:	DAR00506
Hazard class:	n/a

Order now, we can ship this on Monday!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Creality 3D CR-30 PCBA motherboard

Zoom in

Description This Creality 3D CR-30 PCBA motherboard is to replace the original motherboard. It is compatible with Creality 3D CR-30 printers.

Specifications

On-board stepper drivers:	4	Hazard class:	n/a
Brand:	Creality3D	Our item no:	DAR00525

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£63.00 (Incl. 20% VAT)
(£52.50 Excl. 20% VAT)

in stock

Creality 3D Ender-3 S1 mainboard

Zoom in

Description This Creality 3D Ender-3 S1 mainboard is to replace the original mainboard. It is compatible with Creality 3D Ender-3 S1 printers.

Specifications

Brand:	Creality3D	Our item no:	DAR00751
Hazard class:	n/a

Order now, we can ship this on Monday!

£66.50 (Incl. 20% VAT)
(£55.42 Excl. 20% VAT)

in stock

Creality 3D Halot Sky CL-89 mainboard

Zoom in

Description This mainboard is to replace the original mainboard. It is compatible with Creality 3D Halot Sky CL-89 printers.

Specifications

Brand:	Creality3D	Our item no:	DAR00841
Hazard class:	n/a

£118.00 (sold out) (Incl. 20% VAT)
(£98.33 Excl. 20% VAT)

BigTreeTech Octopus Max EZ

Zoom in

Description If you can't get enough of stepper motors, the BigTreeTech Octopus Max EZ offers a phenomenal TEN slots for EZ series stepper motor drive modules. Useful if, for example, you want to build a multi-material station and control it directly from your 3D printer.

The Octopus Max EZ has a powerful 32-bit microprocessor that runs at 550Mhz. In addition, numerous expansions are possible thanks to the CAN, automatic bed leveling sensor, LCD, RGB and FWS ports. The Octopus Max supports 7 fans, 4 heating elements, 5 thermistors and 6 end stops. Optionally you can install a WIFI module for network communication. For extra performance, if your stepper motor driver supports it, up to 56V can be supplied via a jumper setting that can be set per driver.

Specifications

Input voltage:	12-24V	Hazard class:	n/a
Processor:	-	Stepper driver slots:	10
No of thermistors:	5	Our item no:	DAR01028
Brand:	BIGTREETECH

Order now, we can ship this on Monday!

£87.75 (Incl. 20% VAT)
(£73.13 Excl. 20% VAT)

in stock

BigTreeTech Octopus Pro (F429)

Zoom in

2
1
0

Description With the BigTreeTech Octopus Pro (F429) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6/ STM32F407ZET6 / STM32F429ZGT6 / STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.

Other functionalities

8 powerful motor drives for a more stable unit
8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal
STEP/DIR mode, UART mode and A-SPI mode
Connect 6 CNC fans and 2 normal fans
Compatible with NTC100K & PT100/PT1000 high temperature
Supports up to 60 V
Supports proximity sensors, jumper optional pull-up resistor and BL touch
USB Type-C connection

Specifications

Dimensions:	160 x 100 mm	Flash memory:	-
Operating volt logic:	3.3V	Brand:	BIGTREETECH
Operating volt vmot:	-	Hazard class:	n/a
Input voltage:	-	Stepper driver slots:	8
Processor:	ARM CORTEX M4	Our item no:	DAR01181
No of thermistors:	4

Order now, we can ship this on Monday!

£64.00 (Incl. 20% VAT)
(£53.33 Excl. 20% VAT)

in stock

BigTreeTech Octopus Pro v1.1 (H723)

Zoom in

2
1
0

Description With the BigTreeTech Octopus Pro v1.1 (H723) you choose a very stable and safe 3D printer motherboard. It supports Raspberry Pi and Octoprint operating systems and Klipper, Marlin and RRF firmware. The firmware can be updated via DFU mode, where the firmware does not require a bootloader, but is sent directly to the board from the PC. The Octopus Pro has several versions of MCUs, so you can choose the one that suits your needs. It is equipped with a 32-bit ARM-level Cortex-M4 series STM32H723ZET6/ STM32F407ZET6 / STM32F429ZGT6 / STM32F446ZET6 chip. The frequency goes up to 168 MHz and the flash is 1 MB.

Other functionalities

8 powerful motor drives for a more stable unit
8 isolation chips that protect the motherboard and a motherboard protective level conversion chip that converts a 3.3 V signal into a 5 V signal
STEP/DIR mode, UART mode and an SPI mode
Connect 6 CNC fans and 2 normal fans
Compatible with NTC100K & PT100/PT1000 high temperature
Supports up to 60 V - Supports proximity sensors, jumper optional pull-up resistor and BL touch
USB Type-C connection

Specifications

Dimensions:	160 x 100 mm	Flash memory:	-
Operating volt logic:	3.3V	Brand:	BIGTREETECH
Operating volt vmot:	-	Hazard class:	n/a
Input voltage:	12-24V	Stepper driver slots:	8
Processor:	ARM CORTEX M4	Our item no:	DAR01182
No of thermistors:	4

This product can be ordered 1 time(s).

Order now, we can ship this on Monday!

£97.75 (Incl. 20% VAT)
(£81.46 Excl. 20% VAT)

in stock

Creality 3D Ender-3 V3 SE Mainboard

Zoom in

3
2
1
0

Description This motherboard is specially designed for the Ender-3 V3 SE 3D printer from Creality 3D. It is an original part of Creality and is therefore fully compatible.

Specifications

Voltage:	24 v	Printer has USB:	yes
On-board stepper drivers:	4	Our item no:	DAR01251
Brand:	Creality3D	Replaces item no:	DAR01404
Hazard class:	n/a

£46.50 (Incl. 20% VAT)
(£38.75 Excl. 20% VAT)

14 day delivery

Creality 3D CR-M4 Silent Mainboard

Zoom in

2
1
0

Description This CR-M4 Silent Mainboard from Creality 3D is an original replacement part for your 3D printer. It is an almost silent motherboard that you can use in combination with your 3D printer. The board is equipped with an ultra-quiet TMC2209 motor driver and an STM32F401VET6 microcontroller. This motherboard is compatible with the CR-M4 3D printer from Creality 3D.

Specifications

Brand:	Creality3D	Hazard class:	n/a
Weight:	0.113 kg	Our item no:	DAR01395

£92.50 (Incl. 20% VAT)
(£77.08 Excl. 20% VAT)

14 day delivery

Creality 3D Ender 3 V3 SE Mainboard

Zoom in

1
0

Description This Ender 3 V3 SE Mainboard from Creality 3D is an original replacement part for your 3D printer. It is a 32-bit motherboard that you can use in combination with your 3D printer. The motherboard is equipped with an MS35774 driver for precision and is very user-friendly. This motherboard is compatible with the Ender 3 V3 SE 3D printer from Creality 3D.

Specifications

Brand:	Creality3D	Hazard class:	n/a
Weight:	0.074 kg	Our item no:	DAR01404

£44.50 (Incl. 20% VAT)
(£37.08 Excl. 20% VAT)

14 day delivery

Creality 3D Ender 3 V3 KE Mainboard

Zoom in

2
1
0

Description This Ender 3 V3 KE Mainboard from Creality 3D is an original replacement part for your 3D printer. It is a 32-bit motherboard that you can use in combination with your 3D printer. The motherboard is very user-friendly and is equipped with an MS35774 driver for precision. This board is compatible with the Ender-3 V3 KE 3D printer from Creality 3D.

Specifications

Brand:	Creality3D	Hazard class:	n/a
Weight:	0.072 kg	Our item no:	DAR01410

Order now, we can ship this on Monday!

£34.50 (Incl. 20% VAT)
(£28.75 Excl. 20% VAT)

in stock

Creality 3D Halot Mage Mainboard

Zoom in

1
0

Description This Halot Mage Mainboard from Creality 3D is an original replacement part for your 3D printer. You can use this motherboard in combination with your 3D printer. The motherboard is very user-friendly and is equipped with an STM32F401RCT6 microcontroller. This board is compatible with Creality 3D's Halot Mage 3D printer.

Specifications

Brand:	Creality3D	Hazard class:	n/a
Weight:	0.035 kg	Our item no:	DAR01415

£72.50 (Incl. 20% VAT)
(£60.42 Excl. 20% VAT)

14 day delivery

Creality 3D Sermoon D3 Mainboard Kit

Zoom in

2
1
0

Description The Sermoon D3 Mainboard Kit from Creality 3D is an original replacement part for your 3D printer. The motherboard is very user-friendly and equipped with an ultra-quiet TMC2209 motor driver and an STM32F401VET6 microcontroller. This board is compatible with the Sermoon D3 3D printer from Creality 3D.

Specifications

Brand:	Creality3D	Hazard class:	n/a
Weight:	0.12 kg	Our item no:	DAR01426

£74.75 (Incl. 20% VAT)
(£62.29 Excl. 20% VAT)

14 day delivery

Creality 3D Sermoon V1 Mainboard Kit

Zoom in

2
1
0

Description The Sermoon V1 Mainboard Kit from Creality 3D is an original replacement part for your 3D printer. The motherboard is very user-friendly and equipped with an MS35775 motor driver and an STM32F401RCT6 microcontroller. This board is compatible with the Sermoon V1 3D printer from Creality 3D.

Specifications

Brand:	Creality3D	Hazard class:	n/a
Weight:	0.08 kg	Our item no:	DAR01429

£85.50 (Incl. 20% VAT)
(£71.25 Excl. 20% VAT)

14 day delivery

Creality 3D CR-10 SE Mainboard

Zoom in

1
0

Description This 32 bit Mainboard is an original replacement part from Creality. The mainboard is suitable for the CR-10 SE 3D printer from Creality 3D.

Specifications

Brand:

Creality3D

Hazard class:

n/a