1.75mm PLA glow in the dark Specialist PLA 1.75mm PLA Filament type 3D filament 123-3D Filament glow in the dark green 1.75 mm PLA 1.1 kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament glow in the dark green 1.75 mm PLA 1.1 kg

4
3
2
1
0

Description Our green glow in the dark 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA Glow in the dark	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	195 - 235 °C	Our item no:	DFP01056
Amount:	1.1 kg	Replaces item no:	DFP11026
Brand:	123-3D

Order now, we can ship this today!

£23.50 (Incl. 20% VAT)
(£19.58 Excl. 20% VAT)

in stock

REAL glow-in-the-dark PLA filament 1.75mm, 0.5kg

Zoom in

Description With this Real glow-in-the dark PLA filament (1.75mm) you can create 3D objects that radiate green light in the dark. This makes projects with nice light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green glow in the dark	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFG02000
Length:	115 m

Order now, we can ship this today!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL glow-in-the-dark PLA filament 1.75mm, 1kg

Zoom in

Description With this Real glow-in-the-dark PLA filament (1.75mm) you can create 3D objects that radiate green light in the dark. This makes projects with nice light effects possible. The filament has the same printing properties as standard PLA. The material is harder and has more gloss than ABS and is also more suitable for printing sharp corners and details. In contrast, PLA is less flexible and less resistant to high ambient temperatures.

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green glow in the dark	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFG02002
Length:	330 m

Order now, we can ship this today!

£28.01 (Incl. 20% VAT)
(£23.34 Excl. 20% VAT)

in stock

colorFabb glow-in-the-dark green Glowfill filament 1.75mm, 0.75kg

Zoom in

Description Bring light into the darkness with the green colorFabb glow-in-the-dark filament. Glowfill has a beautiful, creamy white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 1.75mm. We recommend a print temperature of 195°C to 220°C and a print speed of 40 to 100mm/s.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	glow fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	green glow in the dark	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13158
Length:	80 m

£30.90 (Incl. 20% VAT)
(£25.75 Excl. 20% VAT)

14 day delivery

Polymaker PolyLite Luminous PLA Blue filament 1.75 mm 1 kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is blue and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	blue	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14397
Amount:	1 kg

Order now, we can ship this today!

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Green filament 1.75 mm 1 kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is green and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14399
Amount:	1 kg

Order now, we can ship this today!

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Orange filament 1.75 mm 1 kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is orange and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	orange	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14398
Amount:	1 kg

Order now, we can ship this today!

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Yellow filament 1.75 mm 1 kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is yellow and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	yellow	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14401
Amount:	1 kg

Order now, we can ship this today!

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

Polymaker PolyLite green Glow in the Dark PLA filament 1.75mm, 1kg

Zoom in

Description Make your 3D prints stand out in the dark with the Polylite Glow in the Dark Green filament from Polymaker. The filament has good adhesion and does not warp. For optimal lighting in the dark, you can place your design in the sunlight or under UV light for at least 30 minutes. The filament is carefully wound around the spool to prevent tangling and is sealed in a resealable ziplock bag with desiccant.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green glow in the dark	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14248
Amount:	1 kg

Order now, we can ship this today!

£25.24 (Incl. 20% VAT)
(£21.03 Excl. 20% VAT)

in stock

eSun Luminous PLA filament 1.75 mm Rainbow 1 kg

Zoom in

1
0

Description Luminous PLA filament Rainbow from eSun is a modified, multi-colored PLA filament with a beautiful rainbow effect. It is made of environmentally friendly material and easy to print with. The blending colors guarantee a striking and unique print. This makes it a perfect filament for decorative prints, toys, sculptures and clothing, for example.

The luminous effect is related to the intensity of the light and how long the print is in contact with the light source. The longer the print is exposed to the light, the better the effect is visible.

Note: We recommend using a steel or ruby nozzle with this filament in combination with a hard steel extruder. The luminous grains in this filament can lead to faster wear of the printer.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	Luminous PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	rainbow	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20228
Amount:	1 kg

Order now, we can ship this today!

£23.95 (Incl. 20% VAT)
(£19.96 Excl. 20% VAT)

in stock

eSun PLA filament 1.75 mm Luminous Blue 1 kg

Zoom in

1
0

Description PLA filament Luminous Blue from eSun has the familiar properties of PLA as well as improved layer adhesion and strength. It is easy to print, environmentally friendly, rigid and resistant to impact. This also makes this filament an ideal choice for printing functional parts. The print will have a smooth surface, be difficult to break and be printed with high precision.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20275
Amount:	1 kg

Order now, we can ship this today!

£20.50 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

eSun PLA filament 1.75 mm Luminous Green 1 kg

Zoom in

1
0

Description PLA filament Luminous Green from eSun has the familiar properties of PLA as well as improved layer adhesion and strength. It is easy to print, environmentally friendly, rigid and resistant to impact. This also makes this filament an ideal choice for printing functional parts. The print will have a smooth surface, be difficult to break and be printed with high precision.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20277
Amount:	1 kg

Order now, we can ship this today!

£18.07 (Incl. 20% VAT)
(£15.06 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this today!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this today!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

123-3D PLA pellets, 1kg

Zoom in

Description PLA pellets can be used by enthusiastic DIY'ers to make PLA filament themselves. The pellets can also be used with a direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	Hazard class:	n/a
Colour:	neutral	Our item no:	DPL00000
Amount:	1 kg

Order now, we can ship this today!

£10.18 (Incl. 20% VAT)
(£8.48 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this today!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

Order now, we can ship this today!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this today!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this today!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this today!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this today!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

Order now, we can ship this today!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this today!

£127.94 (Incl. 20% VAT)
(£106.62 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

1.75mm PLA glow in the dark

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

1.75mm PLA glow in the dark