Flexible Filament type 3D filament 123-3D blue flexible TPE filament 2.85mm, 0.5kg 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

25 - 48 of 62

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg FL45-2009b050 DFB00216

Description The red Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	3020
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00216
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg FL45-2020b050 DFB00217

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	pink	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00217

£24.88 (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

14 day delivery

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg FL45-2021b050 DFB00218

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	9006
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	silver	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00218
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg FL45-2008b050 DFB00219

Description The black Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	9005
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00219
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg DFB00223

Description This transparent BASF Ultrafuse filament with a diameter of 2.85mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPU 85A	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	40 °C	Spool width:	5.2 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00223
Hardness:	NINJAFLEX

Order now, we can ship this on Monday!

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

in stock

NinjaTek NinjaFlex water neutral TPU filament 2.85mm, 0.75kg

NinjaTek NinjaFlex water neutral TPU filament 2.85mm, 0.75kg DFF02010

Description This NinjaFlex TPE 3D filament makes it possible to print flexible objects that resemble flexible rubber. TPE filament adheres well to the (heated) bed and to the other print layers, has a shore hardness of 85A, high elasticity and excellent wear resistance. TPE can print objects in any shape. In addition, NinjaFlex filament complies with REACH and RoHS 2002/95/EC.

To be able to print high-quality TPE objects, a precise adjustment of your 3D printer is necessary. 123-3D cannot provide support for this. Answers to frequently asked questions can be found here.

The Material Safety Data Sheet (MSDS) can be found here.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Length:	94 m
Material:	TPU 85A	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-50 °C	Inner diameter:	Ø 5.1 cm
Colour:	neutral	Spool width:	5.5 cm
Nozzle temp range:	220-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Safety datasheet:	Technical information
Hardness:	NINJAFLEX	Our item no:	DFF02010

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg 3DCC0029005 DFF02102

Description This snow white NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 2.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	snow white	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	0.5 kg	Our item no:	DFF02102
Hardness:	75A

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

14 day delivery

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 1kg

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 1kg 3DCC0029010 DFF02104

Description NinjaTek Chinchilla NT snow white is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 1kg of filament of 2.85mm. NinjaTek Chinchilla NT snow white has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	snow white	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	1 kg	Our item no:	DFF02104
Hardness:	75A

£77.14 (sold out) (Incl. 20% VAT)
(£64.28 Excl. 20% VAT)

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 0.5kg

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 0.5kg 3DCC0129005 DFF02106

Description This midnight black NinjaTek Chinchilla NT is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 1kg roll contains 1.75mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	midnight black	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	0.5 kg	Our item no:	DFF02106
Hardness:	75A

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

14 day delivery

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 1kg

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 1kg 3DCC0129010 DFF02108

Description This midnight black NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing
soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 1kg roll contains 3mm filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Tunnel code:	n/a	Brand:	NinjaTek
Material:	TPU	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-40 °C	Spool width:	5.5 cm
Colour:	midnight black	Hazard class:	n/a
Nozzle temp range:	225-235 °C	Safety datasheet:	Technical information
Amount:	1 kg	Our item no:	DFF02108
Hardness:	75A

£77.14 (Incl. 20% VAT)
(£64.28 Excl. 20% VAT)

14 day delivery

REAL blue TPU 98A filament 2.85mm, 0.5kg

REAL blue TPU 98A filament 2.85mm, 0.5kg DFF03015

Description This blue 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimum print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30mm/s to 40mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	blue	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03015
Hardness:	98A

Order now, we can ship this on Monday!

£33.11 20% discount:

£26.49 (Incl. 20% VAT)
(£22.08 Excl. 20% VAT)

in stock

REAL neutral TPU 98A filament 2.85mm, 0.5kg

REAL neutral TPU 98A filament 2.85mm, 0.5kg DFF03019

Description This neutral 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimal print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30mm/s to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF03019
Hardness:	98A

£33.11 20% discount:

£26.49 (Incl. 20% VAT)
(£22.08 Excl. 20% VAT)

14 day delivery

REAL red TPU 98A filament 2.85mm, 0.5kg

REAL red TPU 98A filament 2.85mm, 0.5kg DFF03023

Description With this strong and flexible red TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	RAL colour no:	3020
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03023

Order now, we can ship this on Monday!

£33.11 20% discount:

£26.49 (Incl. 20% VAT)
(£22.08 Excl. 20% VAT)

in stock

REAL white TPU 98A filament 2.85mm, 0.5kg

REAL white TPU 98A filament 2.85mm, 0.5kg DFF03027

Description With this strong and flexible white TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	TPU	RAL colour no:	9003
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03027

£33.11 20% discount:

£26.49 (Incl. 20% VAT)
(£22.08 Excl. 20% VAT)

14 day delivery

TPU pellets, 1kg (123-3D brand)

Description Make your own flexible filament with these TPU pellets from 123-3D!

With this high-quality transparent granulate you can now get started and determine the colour for your own unique filament. TPU is a flexible and rubber-like material, which gives it excellent resistance to high tensile forces. It has a print temperature of 200°C - 210°C. Ideal for non-slip objects or phone cases.

NOTE: The pellets should be dried before use for optimal quality.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	TPU	Hazard class:	n/a
Colour:	neutral	Our item no:	DPL00007
Amount:	1 kg

Order now, we can ship this on Monday!

£13.49 (Incl. 20% VAT)
(£11.24 Excl. 20% VAT)

in stock

Polymaker PolyFlex TPU-95A High Speed filament 2.85 mm Translucent Red 1 kg

Polymaker PolyFlex TPU-95A High Speed filament 2.85 mm Translucent Red 1 kg PD03008 DFP14373

Description The transparent red Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85 mm. This durable material is resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone covers, for example.

The ideal printing temperature is 200 to 220 °C. For best results, use a heated bed at 25 to 50 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	TPU 95HF	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-50 °C	Spool width:	6.8 cm
Colour:	transparent red	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14373

£49.50 (sold out) (Incl. 20% VAT)
(£41.25 Excl. 20% VAT)

Polymaker PolyFlex TPU-95A High Speed filament 2.85 mm Clear 1 kg

Polymaker PolyFlex TPU-95A High Speed filament 2.85 mm Clear 1 kg PD03006 DFP14374

Description The transparent Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85 mm. This durable material is resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone covers, for example.

The ideal printing temperature is 200 to 220 °C. For best results, use a heated bed at 25 to 50 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	TPU 95HF	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-50 °C	Spool width:	6.8 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14374

£40.65 (sold out) (Incl. 20% VAT)
(£33.88 Excl. 20% VAT)

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this on Monday!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

3DLAC stick (80ml) DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this on Monday!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this on Monday!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

123-3D 3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this on Monday!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

SmoothOn Smooth-On XTC-3D coating (181 gr = A+B) DAR00876

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this on Monday!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

SmoothOn Smooth-On XTC-3D coating (644 gr = A+B) DAR00877

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this on Monday!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

123-3D Filament Spool Holder DFR00005

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

© 2024 - 123-3d.co.uk