1.75mm PETG carbon Specialist PETG 1.75mm PETG 1.75mm filament type 3D filament 123-3D carbon PETG filament 1.75mm, 0.5kg carbon 123-3d.co.uk

Product added to cart. Return Cartridge added product

[Popup will close in 1 sec]

1000's products available for Next Day Delivery

Lowest Price Guarantee

3D Experts on hand to help

T: 0333 325 0011
E: info@123-3D.co.uk
Free delivery over £30

Lots of popular payment options!

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bulk Pack 5 x 123-3D Black PLA 1.75mm 1.1kg

In stock £75.00

Modifi3D repair/modification tool

Modifi3D repair/modification tool

£29.95

Transparent acrylic filament coil holder kit

Transparent acrylic filament coil holder kit

£8.25

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml

£6.29

123-3D carbon PETG filament 1.75mm, 0.5kg

123-3D carbon PETG filament 1.75mm, 0.5kg DFE08000

Description The carbon PETG filament contains 20% carbon particles. This gives 3D-printed objects a unique, futuristic appearance. Thanks to the addition of carbon, this material is stiffer and more heat and impact resistant than standard PETG filament. The surface is matte and more modern.

Note: carbon particles have an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PETG	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	5.5 cm
Nozzle temp range:	220-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE08000
Length:	170 m

£25.08 (sold out) (Incl. 20% VAT)
(£20.90 Excl. 20% VAT)

REAL black PC-PETG filament 1.75mm, 0.5kg

REAL black PC-PETG filament 1.75mm, 0.5kg DFE02062

Description This black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFE02062
Length:	170 m

Order now, we can ship this today!

£29.71 (Incl. 20% VAT)
(£24.76 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 1kg

REAL black PC-PETG filament 1.75mm, 1kg DFE02060

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	8.0 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFE02060
Length:	340 m

Order now, we can ship this today!

£51.81 (Incl. 20% VAT)
(£43.18 Excl. 20% VAT)

in stock

REAL black PC-PETG filament 1.75mm, 3kg

REAL black PC-PETG filament 1.75mm, 3kg DFP12062

Description The black PC-PETG (1.75mm) is a high-quality filament with very good strength properties. The filament is based on PETG and contains 15% carbon particles. This gives PC-PETG the optimum balance between strength, stability and optical clarity. Prints with PC-PETG are more heat resistant and have a modern matte appearance.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PETG85 CARBON15	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.1 cm
Colour:	black	Spool width:	10.5 cm
Nozzle temp range:	225-245 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP12062
Length:	1,020 m

Order now, we can ship this today!

£109.70 (Incl. 20% VAT)
(£91.42 Excl. 20% VAT)

in stock

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg

BASF Ultrafuse black PET CF15 filament 1.75mm, 0.75kg PCF-0350a075 DFB00099

Description This black BASF PET CF15 filament (1.75mm) has a deep colour and an excellent surface finish. With this filament you can print all kinds of heat-resistant and wear-resistant 3D objects in high resolution. PET CF15 is very stable and has very low moisture absorption. This filament contains 15% carbon fibers. As a result, you can also safely use prints of this material in a humid environment.

PET is one of the most widely used plastics in the world: it is very reliable and adheres well. With PET filament you can print just as easily as with PLA, but PET is a lot stronger. You do not need a heated bed for printing with PET, but for the best results we advise you to use one.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PET CF15	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	70-80 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00099

Order now, we can ship this today!

£67.74 (Incl. 20% VAT)
(£56.45 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.40mm

E3D V6 hardened steel nozzle, 1.75mm x 0.40mm V6-NOZZLE-HS-175-400 DED00104

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.4mm (marking #3) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.4 mm	Our item no:	DED00104
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

E3D V6 hardened steel nozzle, 1.75mm x 0.50mm

E3D V6 hardened steel nozzle, 1.75mm x 0.50mm V6-NOZZLE-HS-175-500 DED00105

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.5mm (marking #6) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.5 mm	Our item no:	DED00105
Screwthread type:	M6

Order now, we can ship this today!

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

in stock

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm

E3D V6 hardened steel nozzle, 1.75mm x 0.80mm V6-NOZZLE-HS-175-800 DED00058

Description This replacement V6 nozzle for E3D hotends is made of hardened steel. Hardened steel nozzles are suitable for some highly specialised materials, where a standard brass nozzle is at risk of corrosion. The hardened nozzle provides the same performance as the brass edition, but has a longer delivery time than the standard brass version.

This nozzle has an opening of 0.8mm (marking #5) and is suitable for filament with a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	E3D
Material:	steel	Nozzle coating:	none
Filament diameter:	1.75 mm	Hazard class:	n/a
Nozzle diameter:	0.8 mm	Our item no:	DED00058
Screwthread type:	M6

£18.95 (Incl. 20% VAT)
(£15.79 Excl. 20% VAT)

14 day delivery

Hygrometer round

123-3D Hygrometer round DRW00020

Description In addition to a moisture percentage, the round hygrometer also displays the temperature. Its round shape makes it easy to install. The hygrometer is ideal for making a filament storage box.

*The hygrometer is delivered without battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	black	Our item no:	DRW00020
Brand:	123-3D

Order now, we can ship this today!

£7.40 (Incl. 20% VAT)
(£6.17 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PETG-ESD filament 1.75 mm Black 0.5 kg

Polymaker PolyMax Tough PETG-ESD filament 1.75 mm Black 0.5 kg PB03001 DFP14300

Description With PolyMax Tough PETG-ESD filament you can benefit from even better mechanical properties compared to normal PETG. The added carbon nanotubes make the ESD safe. This means that the transfer of static electricity is reduced and damage to products can be prevented. This makes Tough PETG-ESD perfect for use in combination with electronics.

If you would like to make a very strong print with high layer adhesion, it is advisable to switch off the fan when printing with this filament. If you prefer a print with a high-quality finish, it is recommended to turn on the fan. For an ideal middle ground, it is best to run the fan at 20%.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PETG ESD	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	70-80 °C	Spool width:	6.8 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	250-290 °C	Our item no:	DFP14300
Amount:	0.5 kg

Order now, we can ship this today!

£39.00 (Incl. 20% VAT)
(£32.50 Excl. 20% VAT)

in stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

REAL neutral PVA Plus filament 1.75mm, 0.5kg DFV02002

Description This neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Plus	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02002
Length:	170 m

Order now, we can ship this today!

£40.76 (Incl. 20% VAT)
(£33.97 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

3DLAC Plus adhesive spray, 100ml DVB00018

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

3DLAC stick (80ml) DAR00884

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this today!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

123-3D PETG Pellets 1 kg

123-3D PETG Pellets 1 kg DPL00002

Description PETG pellets can be used by enthusiastic DIY'ers to make PETG filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1 kg of undried pellets, to which no dyes have yet been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00002

Order now, we can ship this today!

£8.50 (Incl. 20% VAT)
(£7.08 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Magigoo 3D glue stick, 50ml MO2016 DCP00205

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this today!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Tesa masking tape, 50mm x 50m DVB00007

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

123-3D 3D print post-processing set DAR00620

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Magigoo 3D glue stick, 120ml MO2018 DCP00206

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this today!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

SmoothOn Smooth-On XTC-3D coating (181 gr = A+B) DAR00876

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this today!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

SmoothOn Smooth-On XTC-3D coating (644 gr = A+B) DAR00877

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this today!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

123-3D Filament Spool Holder DFR00005

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

Order now, we can ship this today!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

Transparent acrylic filament coil holder kit

123-3D Transparent acrylic filament coil holder kit DFR00002

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

123-3D Black acrylic filament coil holder kit DFR00003

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Modifi3D Pro repair/modification tool MODIFI3DPRO DGS00090

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Modifi3D repair/modification tool DGS00007

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

SUNLU FilaDryer S2 drybox DAR00698

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this today!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

SUNLU FilaDryer S1 drybox (UK adapter) DFB00007

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this today!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Polymaker PolyBox™ Edition II filament drybox 70180 PM70180 DAR00634

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

123-3D Smart bluetooth hygrometer WS08 DRW00069

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

Order now, we can ship this today!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

eSun eVacuum kit

eSun eVacuum kit DAR01365

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

SUNLU FilaDryer S4 DAR01448

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this today!

£127.94 (Incl. 20% VAT)
(£106.62 Excl. 20% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

123-3D cleaning filament 1.75mm, 100g DFR00000

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

RepRapWorld 3D Printed spool holder (PLA) SPOOLHOLDER DFR00004

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

© 2024 - 123-3d.co.uk