2.85mm TPC filament 2.85mm filament BASF filament brand 3D filament BASF Ultrafuse blue TPC 45D 2.85mm, 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

BASF Ultrafuse blue TPC 45D filament 2.85mm, 0.5kg

Description The blue Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	5002
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00211
Brand:	BASF

£24.88 (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

Backorder - Due January

BASF Ultrafuse yellow TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The yellow Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	1003
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00212
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse green TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This green Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	6018
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00213
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse neutral TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The neutral colour Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00214

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse orange TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This orange Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	2008
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00215
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse red TPC 45D filament 2.85mm 0.5kg

Zoom in

Description The red Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	3020
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00216
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse pink TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This pink Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	pink	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00217

£24.88 (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

Backorder - Due January

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	9006
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	silver	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00218
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Tunnel code:	n/a	RAL colour no:	9005
Material:	TPC 45D	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 4.9 cm
Heated bed temp:	0-30 °C	Spool width:	5.7 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFB00219
Brand:	BASF

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

2.85mm TPC filament

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

2.85mm TPC filament