3D Printers, Filament & Tools | Best prices UK

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

colorFabb dark blue NGEN filament 2.85mm, 0.75kg

Description This dark blue colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform from 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	dark blue	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13031
Length:	90 m

£29.80 (Incl. 20% VAT)
(£24.83 Excl. 20% VAT)

14 day delivery

colorFabb dark grey NGEN filament 2.85mm, 0.75kg

Zoom in

Description This dark grey colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	dark grey	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13035
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb dark green NGEN filament 2.85mm, 0.75kg

Zoom in

Description This dark green colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	dark green	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13033
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb gold metallic NGEN filament 2.85mm, 0.75kg

Zoom in

Description This gold metallic colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform from 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	metal gold	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13037
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb light blue NGEN filament 2.85mm, 0.75kg

Zoom in

Description This light blue colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	light blue	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13041
Length:	90 m

Order now, we can ship this today!

£27.85 (Incl. 20% VAT)
(£23.21 Excl. 20% VAT)

in stock

colorFabb light grey NGEN filament 2.85mm, 0.75kg

Zoom in

Description This light grey colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13045
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb metal grey NGEN filament 2.85mm, 0.75kg

Zoom in

Description This metallic grey colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform from 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	metal grey	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13039
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb metal silver NGEN filament 2.85mm, 0.75kg

Zoom in

Description This silver coloured colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	metal silver	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13053
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb orange NGEN filament 2.85mm, 0.75kg

Zoom in

Description This orange colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform from 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13047
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb red NGEN filament 2.85mm, 0.75kg

Zoom in

Description This red colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform from 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13051
Length:	90 m

£27.85 (Incl. 20% VAT)
(£23.21 Excl. 20% VAT)

14 day delivery

colorFabb transparent NGEN filament 2.85mm, 0.75kg

Zoom in

Description This transparent colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13029
Length:	90 m

£29.20 (Incl. 20% VAT)
(£24.33 Excl. 20% VAT)

14 day delivery

colorFabb white NGEN filament 2.85mm, 0.75kg

Zoom in

Description This white colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13055
Length:	90 m

£29.85 (Incl. 20% VAT)
(£24.88 Excl. 20% VAT)

14 day delivery

colorFabb black NGEN filament 2.85mm, 0.75kg

Zoom in

Description This black colorFabb filament has a diameter of 2.85mm and various special properties. NGEN filament is suitable for almost all 3D printers! In addition, this filament is odourless, very strong and suitable for printing in low temperatures.

Print advice: print on a heated platform of 70°C to 85°C. At normal settings, we recommend a print temperature of 220°C to 240°C. Do you print continuously with 100% cooling? Then it may be that individual layers dissolve. You can remedy this by reducing the cooling.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	220-240 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13027
Length:	90 m

£29.20 (Incl. 20% VAT)
(£24.33 Excl. 20% VAT)

14 day delivery

colorFabb dark grey NGEN FLEX filament 2.85mm, 0.65kg

Zoom in

Description This colorFabb NGEN Flex in dark grey is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The grey filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN flex	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	dark grey	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13063
Length:	90 m

Order now, we can ship this today!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

colorFabb transparent NGEN FLEX filament 2.85mm, 0.65kg

Zoom in

Description This transparent colorFabb NGEN Flex is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The transparent filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN flex	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13061
Length:	90 m

£32.09 (Incl. 20% VAT)
(£26.74 Excl. 20% VAT)

14 day delivery

colorFabb black NGEN FLEX filament 2.85mm, 0.65kg

Zoom in

Description This colorFabb NGEN Flex in black is a semi-flexible filament with a shore hardness of 95A. NGEN Flex is perfect for printing functional parts that need to be hidden. The black filament is fed through a Bowden tube and can be printed at normal speeds. In addition, NGEN Flex can withstand temperatures up to 125°C.

Printing advice: combine the filament with one of our Creality housings.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	NGEN flex	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13059
Length:	90 m

£32.09 (Incl. 20% VAT)
(£26.74 Excl. 20% VAT)

14 day delivery

colorFabb NGEN-CF10 filament black 2.85 mm 0.75 kg

Zoom in

Description This NGEN-CF10 filament from colorFabb is an upgrade of the original NGEN. Carbon fibers have been added to NGEN-CF10 filament. This makes the filament strong and gives your 3D prints a high-quality appearance. It is easier to print and requires little to no adjustments compared to regular NGEN.

Printing advice: The ideal printing temperature for NGEN-CF10 is 220 to 240 °C. For the best results, a heated bed of 75 to 85 °C is recommended.

Using this filament may mean that you will have to replace the nozzle sooner in the long term than if you use a filament to which no fibers have been added. To prevent this, you can use a hard steel nozzle or stainless steel nozzle.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	75-85 °C	Spool width:	5.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	220-240 °C	Our item no:	DFP13260
Amount:	0.75 kg

£45.78 (Incl. 20% VAT)
(£38.15 Excl. 20% VAT)

14 day delivery

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this today!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this today!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this today!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this today!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this today!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

14 day delivery

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this today!

£127.94 (Incl. 20% VAT)
(£106.62 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

NGEN

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

NGEN