Green 1.75mm PLA Creator Pro 2 FlashForge 3D printer brand 3D filament 123-3D Filament green 1.75mm PLA 1.1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament green 1.75mm PLA 1.1kg DFP01058

2
1
0

Description Our green 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	6016
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	green	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01058
Brand:	123-3D	Replaces item no:	DFP11013

Order now, we can ship this tomorrow!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D Filament green 1.75 mm High Speed PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description This green 1.75 mm High Speed PLA is ideal for use in combination with your High Speed printer. With this filament you can reach a speed of up to 600 mm/s, which is significantly faster than most high speed filaments (which only go up to 300 mm/s). High Speed PLA from 123-3D will significantly speed up your 3D printing process, without sacrificing the high quality you have come to expect from us.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA High Speed	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-65 °C	Inner diameter:	Ø 5.2 cm
Colour:	green	Spool width:	6.8 cm
Nozzle temp range:	215-240 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01187

Order now, we can ship this tomorrow!

£22.50 (Incl. 20% VAT)
(£18.75 Excl. 20% VAT)

in stock

123-3D Filament Fluorescent Green 1.75mm PLA 1.1kg

Zoom in

3
2
1
0

Description Our fluorescent green 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA Fluorescerend	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	195 - 235 °C	Our item no:	DFP01055
Amount:	1.1 kg	Replaces item no:	DFP11025
Brand:	123-3D

Order now, we can ship this tomorrow!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D Filament yellow green 1.75mm PLA 1.1kg

Zoom in

2
1
0

Description Our yellow-green 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	6018
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	yellow/green	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01045
Brand:	123-3D	Replaces item no:	DFP11015

Order now, we can ship this tomorrow!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D Filament glow in the dark green 1.75 mm PLA 1.1 kg

Zoom in

4
3
2
1
0

Description Our green glow in the dark 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Note: Glow-in-the-dark filament has an abrasive effect in the nozzle, which means that it wears faster. It is therefore recommended to replace the nozzle more often and/or to choose a harder stainless steel nozzle or hardened nozzle.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA Glow in the dark	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	55-75 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	195 - 235 °C	Our item no:	DFP01056
Amount:	1.1 kg	Replaces item no:	DFP11026
Brand:	123-3D

Order now, we can ship this tomorrow!

£23.50 (Incl. 20% VAT)
(£19.58 Excl. 20% VAT)

in stock

123-3D green wood PLA filament 1.75mm, 0.5kg

Zoom in

Description 3D print unique objects with the look and feel of real wood. This wood filament contains 20% green wood particles and gives a typical wood smell during printing. After 3D printing, it can be sanded just like fully wooden objects. Because this filament is based on PLA, it is very easy to print with and a heated bed is not necessary. It works with a nozzle of 0.5mm or larger.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA80 WOOD20	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	green wood	Spool width:	5.5 cm
Nozzle temp range:	195-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP08001
Length:	170 m

This product can be ordered 1 time(s).

£26.36 (sold out) (Incl. 20% VAT)
(£21.97 Excl. 20% VAT)

123-3D Filament leaf green 1.75 mm PLA 1.1 kg

Zoom in

2
1
0

Description Our leafy green 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ quality, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	6002
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	leaf green	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01060
Brand:	123-3D	Replaces item no:	DFP11014

Order now, we can ship this tomorrow!

£16.00 (Incl. 20% VAT)
(£13.33 Excl. 20% VAT)

in stock

123-3D chameleon green-blue PLA filament 1.75mm, 1kg

Zoom in

Description This multicoloured chameleon 1.75mm PLA filament from 123-3d.co.uk has a beautiful shine. The most special thing about this filament is the unique colour changing feature. Be enchanted by this beautiful blue-green chameleon filament and print extra striking 3D designs with it!

This PLA filament is stronger and less brittle than standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	-	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	205-230	Spool width:	7.8 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP11066

Order now, we can ship this tomorrow!

£24.23 (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

in stock

123-3D chameleon green-white PLA filament 1.75mm, 1kg

Zoom in

Description This green-white chameleon 1.75mm PLA filament from 123-3d.co.uk has a beautiful shine. The most special thing about this filament is the unique colour change. Be enchanted by this beautiful green-white chameleon filament and print extra striking 3D designs with it!

This PLA filament is stronger and less brittle than standard PLA. In addition, it has all the advantages of PLA: it is biodegradable, does not warp, does not deform and leaves little odour during 3D printing. A heated bed is not necessary.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	green/white	Inner diameter:	Ø 5.2 cm
Nozzle temp range:	205-230	Spool width:	7.8 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP11071

£24.23 (sold out) (Incl. 20% VAT)
(£20.19 Excl. 20% VAT)

REAL camouflage green PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This camouflage green PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02150
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 (Incl. 20% VAT)
(£15.23 Excl. 20% VAT)

in stock

REAL camouflage green PLA Matte filament 1.75mm, 1kg

Zoom in

Description This camouflage green PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02159
Length:	330 m

Order now, we can ship this tomorrow!

£25.46 (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

in stock

REAL fluorescent green PLA filament 1.75mm, 0.5kg

Zoom in

Description This fluorescent green REAL PLA filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp, for example in the disco. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	fluorescent green	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02081
Length:	165 m

Order now, we can ship this tomorrow!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL fluorescent green PLA filament 1.75mm, 1kg

Zoom in

Description This fluorine green REAL PLA filament (1.75mm) allows you to print accessories and sculptures that light up under a blacklight / UV lamp. The filament has a perfected round shape to prevent jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	fluorescent green	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02017
Length:	330 m

Order now, we can ship this tomorrow!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL green PLA filament 1.75mm, 0.5kg

Zoom in

Description This green REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02072
Length:	165 m

Order now, we can ship this tomorrow!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL green PLA filament 1.75mm, 1kg

Zoom in

Description This green REAL PLA filament (1.75mm) has a vibrant colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02011
Length:	330 m

Order now, we can ship this tomorrow!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL khaki green/grey PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This khaki green/grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02154
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 (Incl. 20% VAT)
(£15.23 Excl. 20% VAT)

in stock

REAL khaki green/grey PLA Matte filament 1.75mm, 1kg

Zoom in

Description This khaki green/grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02163
Length:	330 m

Order now, we can ship this tomorrow!

£25.46 (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

in stock

REAL army green PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This army green PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	army green	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02114
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 (Incl. 20% VAT)
(£15.23 Excl. 20% VAT)

in stock

REAL army green PLA Matte filament 1.75mm, 1kg

Zoom in

Description This army green PLA matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	army green	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02112
Length:	330 m

Order now, we can ship this tomorrow!

£25.46 (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

in stock

REAL nuclear green PLA filament 1.75mm, 0.5kg

Zoom in

Description This nuclear green REAL PLA filament (1.75mm) has a clear colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	nuclear green	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02075
Length:	165 m

Order now, we can ship this tomorrow!

£14.66 (Incl. 20% VAT)
(£12.22 Excl. 20% VAT)

in stock

REAL nuclear green PLA filament 1.75mm, 1kg

Zoom in

Description This nuclear green REAL PLA filament (1.75mm) has a clear colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	nuclear green	Spool width:	8.0 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02018
Length:	330 m

Order now, we can ship this tomorrow!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

REAL satin spruce-green PLA filament 1.75mm, 0.5kg

Zoom in

Description This spruce-green satin REAL PLA filament (1.75mm) has a beautiful satin sheen and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-50 °C	Inner diameter:	Ø 5.5 cm
Colour:	satin spruce	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02191
Length:	165 m

Order now, we can ship this tomorrow!

£20.61 (Incl. 20% VAT)
(£17.18 Excl. 20% VAT)

in stock

REAL sparkle emerald green PLA filament 1.75mm, 0.5kg

Zoom in

Description For 3D prints with a 'sparkling' effect, choose our emerald green PLA filament with glitter!

Create striking 3D prints with this unique filament and determine the colour intensity yourself by varying the wall thickness; the thicker the wall, the more beautiful the shiny glitter effect. In addition, this beautiful filament is slightly stronger than standard PLA, making it suitable for a wide variety of objects.

The glitter PLA filament has a diameter of 1.75mm and an ideal print temperature between 180°C and 230°C. It is very easy to use, biodegradable and does not require a heated bed to print. It is recommended to clean the nozzle after use with cleaning filament. Store the glitter PLA filament in a cool and dry place and do not leave it in the sun.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02102
Length:	165 m

Order now, we can ship this tomorrow!

£20.61 (Incl. 20% VAT)
(£17.18 Excl. 20% VAT)

in stock

REAL sparkle garnet green PLA filament 1.75mm, 0.5kg

Zoom in

Description For 3D prints with a sparkling effect, choose our garnet green PLA filament with glitter!

Create striking 3D prints with this unique filament and determine the colour intensity yourself by varying the wall thickness; the thicker the wall, the more beautiful the shiny glitter effect. In addition, this beautiful filament is slightly stronger than standard PLA, making it suitable for a wide variety of objects.

The glitter PLA filament has a diameter of 1.75mm and an ideal print temperature between 180°C and 230°C. It is very easy to use, biodegradable and does not require a heated bed to print. It is recommended to clean the nozzle after use with cleaning filament. Store the glitter PLA filament in a cool and dry place and do not leave it in the sun.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.5 cm
Colour:	green	Spool width:	4.5 cm
Nozzle temp range:	190-215 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02133
Length:	165 m

Order now, we can ship this tomorrow!

£20.61 (Incl. 20% VAT)
(£17.18 Excl. 20% VAT)

in stock

BASF Ultrafuse green PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is green and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	6018
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00108
Brand:	BASF

Order now, we can ship this tomorrow!

£20.00 (Incl. 20% VAT)
(£16.67 Excl. 20% VAT)

in stock

BASF Ultrafuse army green PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is army green in colour and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	6003
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	army green	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00111
Brand:	BASF

Order now, we can ship this tomorrow!

£22.24 (Incl. 20% VAT)
(£18.53 Excl. 20% VAT)

in stock

colorFabb glow-in-the-dark green Glowfill filament 1.75mm, 0.75kg

Zoom in

Description Bring light into the darkness with the green colorFabb glow-in-the-dark filament. Glowfill has a beautiful, creamy white colour in daylight and changes to fluorescent green at night. The filament is combined with PLA/PHA and has a diameter of 1.75mm. We recommend a print temperature of 195°C to 220°C and a print speed of 40 to 100mm/s.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	glow fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	green glow in the dark	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13158
Length:	80 m

£30.90 (Incl. 20% VAT)
(£25.75 Excl. 20% VAT)

14 day delivery

colorFabb green LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 1.75mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13191
Length:	250 m

Order now, we can ship this tomorrow!

£21.20 (Incl. 20% VAT)
(£17.67 Excl. 20% VAT)

in stock

colorFabb olive green LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut and tear. This filament has a diameter of 1.75mm and has an olive green colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	olive green	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13249
Amount:	0.75 kg

Order now, we can ship this tomorrow!

£31.00 (Incl. 20% VAT)
(£25.83 Excl. 20% VAT)

in stock

colorFabb PLA Chameleon Nebula 1.75mm 0.75kg

Zoom in

Description The 1.75 mm PLA Chameleon Nebula filament from colorFabb gives your projects a special look. The unique color mix mimics the appearance of a colorful nebula. The colors will change from deep blues to greens as you move your print. This gives the print a different look each time. The filament is easy to print with, has a fine finish and the use of color ensures that the layers are less clear. With Nebula Chameleon filament you add an extra color dimension to your 3D projects.

Specifications

Tunnel code:	n/a	Length:	250 m
Material:	PLA	Brand:	colorFabb
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	50-60 °C	Inner diameter:	Ø 5.2 cm
Colour:	-	Spool width:	5.5 cm
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13257

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

colorFabb pastel green Vibers PLA filament 1.75mm, 0.75kg

Zoom in

Description With this Vibers PLA filament from colorFabb you can create the most stunning smooth prints with a matte finish. The product was developed in collaboration with the Dutch company Vibers and contains 10% elephant grass. The filament is therefore slightly more brittle, but the CO2 footprint of each print is no less than a third (!) less than with normal PLA.

This colorFabb filament has a diameter of 1.75mm. The colour is pastel green and the filament is supplied on a spool of recycled cardboard to further minimise the use of plastic.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	Vibers	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	pastel green	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13243
Length:	250 m

Order now, we can ship this tomorrow!

£26.00 (Incl. 20% VAT)
(£21.67 Excl. 20% VAT)

in stock

colorFabb leaf green PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with the colorFabb PLA/PHA filament in the colour leaf green. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and less brittle than other filaments. You can create beautiful, colourful prints thanks to the intense colour green. This filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	leaf green	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13126
Length:	250 m

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

colorFabb intense green PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print high-quality 3D objects with ease with the colorFabb PLA/PHA filament in an intense green colour. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and is less brittle than other filaments. You can create striking prints with this intense green colour. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	intense green	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13124
Length:	250 m

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

colorFabb mint turquoise PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with the colorFabb PLA/PHA filament in the colour mint turquoise. PLA/PHA consists of a mix of bioplastics and is recyclable. It is strong and less brittle than other filaments. The intense turquoise colour allows you to create prints that are reminiscent of the ocean. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	mint turqoise	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13128
Length:	250 m

£18.80 (Incl. 20% VAT)
(£15.67 Excl. 20% VAT)

14 day delivery

colorFabb transparent green PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Easily print high-quality 3D objects with the colorFabb PLA/PHA filament in transparent green. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. You can create striking prints with this transparent green color. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	transparent green	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13108
Length:	250 m

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

colorFabb moss green Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This colorFabb filament in the colour moss green has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	stone fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13237

Order now, we can ship this tomorrow!

£27.00 (Incl. 20% VAT)
(£22.50 Excl. 20% VAT)

in stock

Dremel green PLA filament 1.75mm, 0.75kg

Zoom in

Description Create detailed 3D prints with a high-quality finish with this green PLA filament from Dremel.

This biodegradable PLA filament is an extremely popular and user-friendly filament type. Ideal for producing visually appealing 3D objects. In addition, this filament also has a slightly higher print temperature (220°C) than regular PLA and an optimal bed temperature of 35°C. With a diameter of 1.75mm it is compatible with almost all 3D printers.

In addition, the coil is equipped with an RFID chip, so that your Dremel printer automatically uses the correct settings. The perfect material for beginners and experts!

Specifications

Tunnel code:	n/a	Brand:	Dremel
Material:	PLA	Outer diameter:	Ø 18.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 1.9 cm
Heated bed temp:	0-60 °C	Spool width:	5.4 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	200-240 °C	Our item no:	DCP00184
Amount:	0.75 kg

£32.50 (Incl. 20% VAT)
(£27.08 Excl. 20% VAT)

14 day delivery

eSun ePLA-Silk Magic filament 1.75 mm Green Blue 1 kg

Zoom in

Description Create a dreamy effect with the two-color ePLA-Silk Magic filament Green Blue from eSun. The filament changes color when viewed from a different angle. This gives your prints a surprising and playful effect. Compared to other materials, ePLA Silk Magic is easier to remove. In addition, it gives the print a smooth appearance. This Magic PLA filament is an upgrade from standard PLA and can therefore be printed very easily.

Dreamy two-tone effect
Silky, shiny texture
Slippery surface
Easy to remove
Easy to print
Not easy to break

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20221
Amount:	1 kg

Order now, we can ship this tomorrow!

£19.45 (Incl. 20% VAT)
(£16.21 Excl. 20% VAT)

in stock

eSun eSilk green PLA filament 1.75mm, 1kg

Zoom in

1
0

Description eSun's green eSilk PLA filament has a glossy and silky-gloss texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA ESILK	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-220 °C	Our item no:	DFE20197
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.25 (Incl. 20% VAT)
(£13.54 Excl. 20% VAT)

in stock

eSun eSilk lime green PLA filament 1.75mm, 1kg

Zoom in

1
0

Description eSun's lime green eSilk PLA filament has a glossy and satin texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA ESILK	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	6.5 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-220 °C	Our item no:	DFE20199
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Green 1kg

Zoom in

1
0

Description eSun's green PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20095
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75 mm Olive Green 1 kg

Zoom in

1
0

Description The olive green PLA+ filament from eSun is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modeling. This eSun PLA+ filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	olive green	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20278
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Nuclear green 1kg

Zoom in

1
0

Description eSun's nuclear green PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	nuclear green	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20098
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Pine green 1kg

Zoom in

1
0

Description eSun's pine green PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	pine green	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20092
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyLite Dual Silk PLA filament 1.75 mm Caribbean Sea Blue-Green 1 kg

Zoom in

Description The Caribbean Sea Blue-Green PolyLite Dual Silk PLA from Polymaker has an amazing, two-tone, satin effect. The color of your print appears to change from Sea Blue to Green when you view it from a different angle. In addition, this filament is very easy to use and environmentally friendly. Perfect for making decorative prints.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14339
Amount:	1 kg

Order now, we can ship this tomorrow!

£28.80 (Incl. 20% VAT)
(£24.00 Excl. 20% VAT)

in stock

Polymaker PolyLite Dual Silk PLA filament 1.75 mm Jadeite Green-Chrome 1 kg

Zoom in

Description The Jadeite Green-Chrome PolyLite Dual Silk PLA from Polymaker has an amazing, two-tone, satin effect. The color of your print appears to change from Green to Chrome when you view it from a different angle. In addition, this filament is very easy to use and environmentally friendly. Perfect for making decorative prints.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14340
Amount:	1 kg

Order now, we can ship this tomorrow!

£28.80 (Incl. 20% VAT)
(£24.00 Excl. 20% VAT)

in stock

Polymaker PolyLite green PLA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a bright green colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190°C to 230°C. We recommend a temperature between 25°C and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14066

Order now, we can ship this tomorrow!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite PLA filament 1.75 mm Jungle Green 1 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75 mm and a jungle green color. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, down to the last detail. PLA filament is harder and shinier than ABS. The ideal printing temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14302

Order now, we can ship this tomorrow!

£23.38 (Incl. 20% VAT)
(£19.48 Excl. 20% VAT)

in stock

Polymaker PolyLite PLA filament 1.75 mm Olive Green 1 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75 mm and an olive green color. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, down to the last detail. PLA filament is harder and shinier than ABS. The ideal printing temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	olive green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14303

Order now, we can ship this tomorrow!

£19.00 (Incl. 20% VAT)
(£15.83 Excl. 20% VAT)

in stock

Polymaker PolyLite turquoise PLA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear turquoise colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190°C to 230°C. We recommend a temperature between 25°C and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	turquoise	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14078

Order now, we can ship this tomorrow!

£24.99 (Incl. 20% VAT)
(£20.83 Excl. 20% VAT)

in stock

Polymaker PolyLite green Glow in the Dark PLA filament 1.75mm, 1kg

Zoom in

Description Make your 3D prints stand out in the dark with the Polylite Glow in the Dark Green filament from Polymaker. The filament has good adhesion and does not warp. For optimal lighting in the dark, you can place your design in the sunlight or under UV light for at least 30 minutes. The filament is carefully wound around the spool to prevent tangling and is sealed in a resealable ziplock bag with desiccant.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green glow in the dark	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14248
Amount:	1 kg

Order now, we can ship this tomorrow!

£25.24 (Incl. 20% VAT)
(£21.03 Excl. 20% VAT)

in stock

Polymaker PolyLite army green PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite army green PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	30-60 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14257

Order now, we can ship this tomorrow!

£26.40 (Incl. 20% VAT)
(£22.00 Excl. 20% VAT)

in stock

Polymaker PolyLite green PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite green PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	30-60 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14258

Order now, we can ship this tomorrow!

£26.40 (Incl. 20% VAT)
(£22.00 Excl. 20% VAT)

in stock

Polymaker PolyLite PLA Sparkle filament 1.75 mm Dark Green 1 kg

Zoom in

Description Create beautiful prints with a futuristic effect with Polymaker Polylite PLA dark green Sparkle filament. This user-friendly, reliable and high-quality filament uses Jam-Free technology. This technology enables even extrusion, reducing the risk of blockages. This also increases the heat resistance of the filament. The subtle shimmer completes your print.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	dark green	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14319
Amount:	1 kg

Order now, we can ship this tomorrow!

£25.40 (Incl. 20% VAT)
(£21.17 Excl. 20% VAT)

in stock

Polymaker PolyLite Silk PLA filament 1.75 mm Green 1 kg

Zoom in

Description Print your designs with a glossy effect with the green PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. This makes the individual print layers on the side surfaces less visible, resulting in a smooth surface.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14327

Order now, we can ship this tomorrow!

£24.80 (Incl. 20% VAT)
(£20.67 Excl. 20% VAT)

in stock

Polymaker PolyLite lime silk PLA filament 1.75mm, 1kg

Zoom in

Description Print your designs with a glossy effect with the lime coloured PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. As a result, the separate print layers on the side surfaces are less visible, resulting in a smooth surface.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14268

Order now, we can ship this tomorrow!

£25.35 (Incl. 20% VAT)
(£21.13 Excl. 20% VAT)

in stock

Polymaker PolyLite Silk PLA filament 1.75 mm Teal 1 kg

Zoom in

Description Print your designs with a glossy effect with the PLA Silk filament from Polylite in teal. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. This makes the individual print layers on the side surfaces less visible, resulting in a smooth surface.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	teal	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14328

Order now, we can ship this tomorrow!

£22.10 (Incl. 20% VAT)
(£18.42 Excl. 20% VAT)

in stock

Polymaker PolyMax green PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright green colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14104

Order now, we can ship this tomorrow!

£33.20 (Incl. 20% VAT)
(£27.67 Excl. 20% VAT)

in stock

Polymaker PolyMax turquoise PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright turquoise colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	turquoise	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14114

Order now, we can ship this tomorrow!

£35.40 (Incl. 20% VAT)
(£29.50 Excl. 20% VAT)

in stock

Polymaker PolyTerra arctic teal PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Arctic Teal' has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	arctic teal	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14164

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA filament 1.75 mm Arctic Teal 3 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. The extra smooth PolyTerra filament in the color 'Arctic Teal' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and for every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	arctic teal	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14356

Order now, we can ship this tomorrow!

£48.98 (Incl. 20% VAT)
(£40.82 Excl. 20% VAT)

in stock

Polymaker PolyTerra army dark green PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'army dark green' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	army dark green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14231

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra army light green PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'army light green' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	army light green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14232

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra forest green PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Forest Green' has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	forrest green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14150

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra mint green PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Mint' has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every coil sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	mint	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14162

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA filament 1.75 mm Muted Green 1 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. The extra smooth PolyTerra filament in the color 'Muted Green' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and for every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14347

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra green PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimized for better layer adhesion. The PolyTerra filament in the colour 'green' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14247

Order now, we can ship this tomorrow!

£21.89 (Incl. 20% VAT)
(£18.24 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA+ filament 1.75 mm Teal 1 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. PLA+ filament has also been optimized for better layer adhesion. The PolyTerra filament in the color 'teal' has a silky soft finish and is partly of natural origin. For every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	teal	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14361

Order now, we can ship this tomorrow!

£20.98 (Incl. 20% VAT)
(£17.48 Excl. 20% VAT)

in stock

eSun ePLA-Matte filament 1.75 mm Mint Green 1 kg (paper spool)

Zoom in

Description This eSun ePLA-Matte filament in the color Mint Green is an easy to print, odorless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	45-60 °C	Spool width:	6.4 cm
Colour:	mint green	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20251
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

123-3D Glitter filament Green 1.75 mm PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description Go for a 'stunning' effect with green PLA glitter filament. This filament ensures that you can create unique prints. It is slightly stronger than normal PLA, so you can use it for many different prints. In addition, it still has the nice properties of PLA. It is easy to use and biodegradable. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA glitter	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	green	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01129

Order now, we can ship this tomorrow!

£19.95 (Incl. 20% VAT)
(£16.63 Excl. 20% VAT)

in stock

123-3D Pastel filament Mint green 1.75 mm PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description Looking for a soft look for your print? Then choose mint green pastel PLA filament from 123-3D. Pastel PLA gives your print a cheerful look. It is easy to use, strong and heat resistant. In addition, the light is flexible and biodegradable. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA Pastel	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	mint green	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01134

Order now, we can ship this tomorrow!

£18.50 (Incl. 20% VAT)
(£15.42 Excl. 20% VAT)

in stock

Polymaker PolyTerra Dual PLA filament 1.75 mm Chameleon (Teal-Yellow) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Chameleon color is teal on one side and yellow on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green/yellow	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14389
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyTerra Dual PLA filament 1.75 mm Camouflage (Dark Green-Brown) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Camouflage color is dark green on one side and brown on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14391
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyLite Luminous PLA Green filament 1.75 mm 1 kg

Zoom in

2
1
0

Description Create the most beautiful glow in the dark prints with Polymaker PolyLite Luminous, a high-quality PLA filament. It is reliable, easy to print and uses Jam-Free technology. This increases the heat resistance of the filament and reduces the risk of blockages during printing. The filament is green and has a diameter of 1.75 mm.

Note: For frequent use, a hardened steel nozzle is recommended

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14399
Amount:	1 kg

Order now, we can ship this tomorrow!

£27.50 (Incl. 20% VAT)
(£22.92 Excl. 20% VAT)

in stock

eSun PLA filament 1.75 mm Luminous Green 1 kg

Zoom in

1
0

Description PLA filament Luminous Green from eSun has the familiar properties of PLA as well as improved layer adhesion and strength. It is easy to print, environmentally friendly, rigid and resistant to impact. This also makes this filament an ideal choice for printing functional parts. The print will have a smooth surface, be difficult to break and be printed with high precision.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	210-230 °C	Our item no:	DFE20277
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

123-3D Pastel filament Turquoise 1.75 mm PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description Looking for a soft look for your print? Then choose turquoise pastel PLA filament from 123-3D. Pastel PLA gives your print a cheerful look. It is easy to use, strong and heat resistant. In addition, the light is flexible and biodegradable. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA Pastel	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	turquoise	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01136

Order now, we can ship this tomorrow!

£18.50 (Incl. 20% VAT)
(£15.42 Excl. 20% VAT)

in stock

REAL filament green 1.75 mm PLA Recycled 1 kg

Zoom in

2
1
0

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This green PLA filament is made from the manufacturer's industrial residues to prevent waste. The remains are recycled into a brand new filament with the same, or even better, properties than the original. The filament has a diameter of 1.75 mm and an ideal printing temperature of 210°C. In addition, with this ultra-strong PLA you have virtually no problems with warping (warping of the print) and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15 - 25°C) to ensure its quality and lifespan.

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PLA R	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-55 °C	Spool width:	7.0 cm
Colour:	green	Hazard class:	n/a
Nozzle temp range:	190-220 °C	Our item no:	DFP02309
Amount:	1 kg	Replaces item no:	DFP12048
Brand:	REAL

Order now, we can ship this tomorrow!

£22.06 (Incl. 20% VAT)
(£18.38 Excl. 20% VAT)

in stock

Prusament PLA Blend Lime Green 970g

Zoom in

Description

Prusament PLA is a high-quality 3D printing filament produced by Prusa Research. Known for its precision and consistency, Prusament PLA is a popular choice among 3D printing enthusiasts and professionals alike. Here are some key features:

Ease of Use: Prusament PLA is easy to print with, making it suitable for both beginners and experienced users. It has a low melting temperature, which helps in achieving smooth and detailed prints.
Dimensional Accuracy: The filament boasts a precision of ±0.02mm, ensuring consistent and reliable results for every print.
Low Warping: Thanks to its low thermal expansion, Prusament PLA experiences minimal warping, making it ideal for printing large objects.
Strength and Toughness: While PLA is generally brittle, Prusament PLA offers a good balance of hardness and toughness, suitable for a variety of applications.
Environmental Impact: PLA is biodegradable and derived from renewable resources, making it an eco-friendly option for 3D printing.

Applications:

Prototypes and Concept Models: Perfect for creating detailed prototypes and concept models due to its ease of printing and fine detail capabilities.
Miniatures and Jewellery: Ideal for small, intricate designs such as miniatures and jewellery, thanks to its precision and smooth finish.
Large Prints: Suitable for large-scale prints with minimal warping and excellent layer adhesion.

Printing Recommendations:

Nozzle Temperature: 210 ± 10 °C
Bed Temperature: 40–60 °C
Cooling: Part cooling fan required at 100% speed

Specifications

Filament diameter:	1.75 mm	Brand:	Prusa
Amount:	0.97 kg

Order now, we can ship this tomorrow!

£29.80 (Incl. 20% VAT)
(£24.83 Excl. 20% VAT)

in stock

Prusament PLA Galaxy Green 1kg

Zoom in

Description

Prusament PLA is a high-quality 3D printing filament produced by Prusa Research. Known for its precision and consistency, Prusament PLA is a popular choice among 3D printing enthusiasts and professionals alike. Here are some key features:

Ease of Use: Prusament PLA is easy to print with, making it suitable for both beginners and experienced users. It has a low melting temperature, which helps in achieving smooth and detailed prints.
Dimensional Accuracy: The filament boasts a precision of ±0.02mm, ensuring consistent and reliable results for every print.
Low Warping: Thanks to its low thermal expansion, Prusament PLA experiences minimal warping, making it ideal for printing large objects.
Strength and Toughness: While PLA is generally brittle, Prusament PLA offers a good balance of hardness and toughness, suitable for a variety of applications.
Environmental Impact: PLA is biodegradable and derived from renewable resources, making it an eco-friendly option for 3D printing.

Applications:

Prototypes and Concept Models: Perfect for creating detailed prototypes and concept models due to its ease of printing and fine detail capabilities.
Miniatures and Jewellery: Ideal for small, intricate designs such as miniatures and jewellery, thanks to its precision and smooth finish.
Large Prints: Suitable for large-scale prints with minimal warping and excellent layer adhesion.

Printing Recommendations:

Nozzle Temperature: 210 ± 10 °C
Bed Temperature: 40–60 °C
Cooling: Part cooling fan required at 100% speed

Specifications

Filament diameter:	1.75 mm	Brand:	Prusa
Amount:	1 kg

Order now, we can ship this tomorrow!

£29.80 (Incl. 20% VAT)
(£24.83 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this tomorrow!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this tomorrow!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this tomorrow!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this tomorrow!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

14 day delivery

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this tomorrow!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this tomorrow!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this tomorrow!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

14 day delivery

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this tomorrow!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this tomorrow!

£43.95 (Incl. 20% VAT)
(£36.63 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

£32.50 (sold out) (Incl. 20% VAT)
(£27.08 Excl. 20% VAT)

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this tomorrow!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

14 day delivery

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this tomorrow!

£105.00 (Incl. 20% VAT)
(£87.50 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Green

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Green