Grey 1.75mm PLA CR-10S Pro Creality 3D printer brand 3D filament 123-3D Filament grey 1.75mm PLA 1.1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament grey 1.75mm PLA 1.1kg DFP01050

2
1
0

Description Our grey 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You will now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	7011
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01050
Brand:	123-3D	Replaces item no:	DFP11020

Other Quantities

123-3D Filament grey 1.75mm PLA large 3 kg spool from £43.05 £40.90

123-3D Filament grey Bulk Pack 5 x 1.1kg 1.75mm PLA from £75.00 £71.25

Order now, we can ship this tomorrow!

£16.00 5% discount:

£15.20 (Incl. 20% VAT)
(£12.67 Excl. 20% VAT)

in stock

123-3D Filament grey 1.75 mm High Speed PLA 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description This grey 1.75 mm High Speed PLA is ideal for use in combination with your High Speed printer. With this filament you can reach a speed of up to 600 mm/s, which is considerably faster than most high speed filaments (which only go up to 300 mm/s). High Speed PLA from 123-3D will significantly speed up your 3D printing process, without sacrificing the high quality you have come to expect from us.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA High Speed	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-65 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	215-240 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01184

Order now, we can ship this tomorrow!

£22.50 10% discount:

£20.25 (Incl. 20% VAT)
(£16.88 Excl. 20% VAT)

in stock

123-3D Filament grey 1.75 mm PLA 3 kg

Zoom in

2
1
0

Description Our grey 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard and is better wound on the spool but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers.

Note: This is 1 large 3kg spool of filament.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	RAL colour no:	7011
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 30.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	10.0 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP01051
Brand:	123-3D

Order now, we can ship this tomorrow!

£43.05 5% discount:

£40.90 (Incl. 20% VAT)
(£34.08 Excl. 20% VAT)

in stock

123-3D Filament Dark Grey 1.75 mm PLA Tough 1.1 kg (Jupiter series)

Zoom in

2
1
0

Description PLA Tough filament dark grey is specially designed to better withstand impact. The impact resistance and strength are comparable to ABS, while being combined with the stiffness and ease of use of PLA. You can easily print larger, strong and impact-resistant models with the environmentally friendly PLA Tough. This filament has a diameter of 1.75 mm and there is 1.1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	dark grey	Spool width:	6.8 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01146

Order now, we can ship this tomorrow!

£36.50 20% discount:

£29.20 (Incl. 20% VAT)
(£24.33 Excl. 20% VAT)

in stock

123-3D Filament Bulk Pack 5 x Grey PLA 1.75mm 1.1kg Total 5.5kg!

123-3D Filament Bulk Pack 5 x Grey PLA 1.75mm 1.1kg DFE00052

Zoom in

Description The 123-3D own-brand grey PLA bulk pack (Jupiter series) consists of 5 x 1kg spools of our own-brand PLA+ quality grey 123-3D filament. 123-3D filaments guarantee quality, reliability and good performance. Total 5.5kg.

Great Value Bundle Price!

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	RAL colour no:	-
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Quantity:	5	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	195 - 235	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFE00052
Length:	330 m

Order now, we can ship this tomorrow!

£75.00 5% discount:

£71.25 (Incl. 20% VAT)
(£59.38 Excl. 20% VAT)

in stock

123-3D Filament light grey 1.75mm PLA 1.1kg

Zoom in

2
1
0

Description Our light grey 1.75 mm PLA filament from the Jupiter series has been improved! It has an improved composition to PLA+ standard, but still contains all the advantages of PLA: it is biodegradable, does not warp, does not deform and is almost odorless during 3D printing. In addition, this filament has a better hardness, a constant diameter and is less brittle compared to standard PLA. It enables easy low temperature 3D printing and is ideal for all FFF/FDM 3D printers. The filament is now even better wound on a narrower spool that fits in almost all printers. You now receive 1.1 kg of filament instead of 1 kg!

Read more about printing with PLA filament here .

Great value!

Specifications

Tunnel code:	n/a	RAL colour no:	7035
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	55-75 °C	Inner diameter:	Ø 5.2 cm
Colour:	light grey	Spool width:	6.8 cm
Nozzle temp range:	195 - 235 °C	Hazard class:	n/a
Amount:	1.1 kg	Our item no:	DFP01053
Brand:	123-3D	Replaces item no:	DFP11021

Order now, we can ship this tomorrow!

£16.00 5% discount:

£15.20 (Incl. 20% VAT)
(£12.67 Excl. 20% VAT)

in stock

REAL grey PLA filament 1.75mm, 0.5kg

Zoom in

Description The grey REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	7011
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	grey	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-215 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Length:	165 m	Our item no:	DFP02077

Order now, we can ship this tomorrow!

£14.66 20% discount:

£11.73 (Incl. 20% VAT)
(£9.78 Excl. 20% VAT)

in stock

REAL grey PLA filament 1.75mm, 1kg

Zoom in

Description This grey REAL PLA filament (1.75mm) has a deep colour and is suitable for 3D printing a wide variety of objects. A perfected round shape prevents jamming. PLA can print objects in any shape with sharp details. It is harder and shinier than ABS and does not require a heated bed. PLA is an environmentally friendly plastic, suitable for recycling.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	RAL colour no:	7011
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	grey	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-215 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP02008

Order now, we can ship this tomorrow!

£22.06 20% discount:

£17.65 (Incl. 20% VAT)
(£14.71 Excl. 20% VAT)

in stock

REAL grey PLA Recycled filament 1.75mm, 1kg

Zoom in

Description This PLA Recycled filament from REAL is just as user-friendly as regular PLA, but slightly better for the environment!

This grey PLA filament is made from the industrial residues of the manufacturer to prevent waste. The residues are recycled into a brand new filament with the same or even better properties than the original. The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, with this ultra-strong PLA you will have virtually no problems with warping and you can print without a heated bed. Do you have a heated bed? Then a temperature of at least 60°C is ideal!

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA R	RAL colour no:	7009
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	0-55 °C	Outer diameter:	Ø 20.0 cm
Colour:	grey	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	190-220 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	330 m	Our item no:	DFP12045

Order now, we can ship this tomorrow!

£22.06 20% discount:

£17.65 (Incl. 20% VAT)
(£14.71 Excl. 20% VAT)

in stock

REAL grey PLA Tough filament 1.75mm, 0.5kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping. For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP12018
Length:	165 m

Order now, we can ship this tomorrow!

£20.61 20% discount:

£16.49 (Incl. 20% VAT)
(£13.74 Excl. 20% VAT)

in stock

REAL grey PLA Tough filament 1.75mm, 1kg

Zoom in

Description This PLA Tough filament from REAL combines the ease of use of PLA with the excellent mechanical properties of ABS!

PLA Tough is comparable in strength to ABS (one of the strongest filament types), but is just as easy to print with as PLA. Ideal for industrial applications where a lot of force is applied to the printed object. Think of tools or parts for your 3D printer.

The filament has a diameter of 1.75mm and an ideal print temperature of 210°C. In addition, the filament does not shrink during cooling and with this ultra-strong PLA you will hardly suffer from warping (warping of the print). For best results, print with a heated bed at a temperature between 60°C and 80°C.

TIP: Store this filament in a dry and cool place (15°C - 25°C) to ensure quality and longevity.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA tough	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	60-80 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP12012
Length:	330 m

Order now, we can ship this tomorrow!

£31.88 20% discount:

£25.50 (Incl. 20% VAT)
(£21.25 Excl. 20% VAT)

in stock

REAL khaki green/grey PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This khaki green/grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02154
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 20% discount:

£14.62 (Incl. 20% VAT)
(£12.18 Excl. 20% VAT)

in stock

SUNLU PLA Matte grey filament 1.75mm, 1kg

Zoom in

Description This 1kg spool of SUNLU matte grey PLA (1.75mm) has a matte, non-glossy finish. It is a polylactic acid filament that is made from renewable resources (like corn starch or sugarcane) and breaks down more easily than traditional plastics.

Matte PLA offers good print quality with less warping compared to regular PLA due to its chemistry and matte texture. It can produce detailed, matte-textured 3D printed objects. It requires similar print settings to regular PLA, like printing at 190-220°C with a cooled print bed. Overall, matte PLA provides an alternative material for 3D printing matte, detailed objects.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA	Outer diameter:	Ø 19.6 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	0-80 °C	Spool width:	6.0 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP16005
Amount:	1 kg

This product can be ordered 1 time(s).

Order now, we can ship this tomorrow!

£16.80 (Incl. 20% VAT)
(£14.00 Excl. 20% VAT)

in stock

REAL khaki green/grey PLA Matte filament 1.75mm, 1kg

Zoom in

Description This khaki green/grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02163
Length:	330 m

Order now, we can ship this tomorrow!

£25.46 20% discount:

£20.37 (Incl. 20% VAT)
(£16.98 Excl. 20% VAT)

in stock

SUNLU PLA+ grey filament 1.75mm, 1kg

Zoom in

Description This 1kg spool of grey 1.75mm SUNLU PLA+ is PLA that has been enhanced with the addition of modifiers during PLA synthesis. PLA+ has superior flexibility, strength & ductility.

Items that have been 3D printed from SUNLU PLA+ have a smoother surface and also a better appearance than standard PLA.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Material:	PLA matte	Outer diameter:	Ø 19.6 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 7.3 cm
Heated bed temp:	70-80 °C	Spool width:	6.0 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP16002
Amount:	1 kg

Order now, we can ship this tomorrow!

£17.15 (Incl. 20% VAT)
(£14.29 Excl. 20% VAT)

in stock

REAL shadow grey PLA Matte filament 1.75mm, 0.5kg

Zoom in

Description This shadow grey PLA Matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	4.5 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP02156
Length:	165 m

Order now, we can ship this tomorrow!

£18.28 20% discount:

£14.62 (Incl. 20% VAT)
(£12.18 Excl. 20% VAT)

in stock

REAL shadow grey PLA Matte filament 1.75mm, 1kg

Zoom in

Description This shadow grey PLA matte filament (1.75mm) makes it possible to 3D print objects with a modern, matte finish. Printing with PLA Matte is very easy; the material has good bed adhesion and printing is faster than with standard PLA filament.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	grey	Spool width:	8.0 cm
Nozzle temp range:	205-225 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP02165
Length:	330 m

£25.46 (sold out) (Incl. 20% VAT)
(£21.22 Excl. 20% VAT)

Zortrax grey Z-PLA filament 1.75mm, 2kg

Zoom in

Description Zortrax Z-PLA 3D filament is made of environmentally friendly components. With this biodegradable filament you can easily print complex models with extreme precision and a smooth surface.

This Zortrax filament in the colour grey has a diameter of 1.75mm and a weight of ± 2000 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Spool width:	7.4 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	205-215 °C	Our item no:	DFP00157
Amount:	2 kg

£60.92 (sold out) (Incl. 20% VAT)
(£50.77 Excl. 20% VAT)

Zortrax cool grey Z-PLA Pro filament 1.75mm, 0.8kg

Zoom in

Description This Zortrax Z-PLA Pro 3D filament is made of environmentally friendly material and contains gypsum as an additive. With this biodegradable filament you can print models with an even, matte surface, making the details more visible. It is extremely suitable for printing large models, because the filament hardly shrinks or warps.

This Zortrax filament in the colour cool grey has a diameter of 1.75mm and a weight of ± 800 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	0-60 °C	Spool width:	5.7 cm
Colour:	cool grey	Hazard class:	n/a
Nozzle temp range:	202-212 °C	Our item no:	DFP00145
Amount:	0.8 kg

£42.32 (sold out) (Incl. 20% VAT)
(£35.27 Excl. 20% VAT)

Zortrax cool grey Z-PLA Pro filament 1.75mm, 2kg

Zoom in

Description This Zortrax Z-PLA Pro 3D filament is made of environmentally friendly material and contains gypsum as an additive. With this biodegradable filament you can print models with an even, matte surface, making the details more visible. It is extremely suitable for printing large models, because the filament hardly shrinks or warps.

This Zortrax filament in cool grey has a diameter of 1.75mm and a weight of ± 2000 grams.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z PLA Pro	Outer diameter:	Ø 28.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	0-60 °C	Spool width:	7.4 cm
Colour:	cool grey	Hazard class:	n/a
Nozzle temp range:	202-212 °C	Our item no:	DFP00144
Amount:	2 kg

£85.51 (sold out) (Incl. 20% VAT)
(£71.26 Excl. 20% VAT)

BASF Ultrafuse grey PLA filament 1.75mm, 0.75kg

Zoom in

Description This BASF PLA filament (1.75mm) is grey and suitable for 3D printing all kinds of creative designs. The perfect round shape ensures this PLA filament does not easily get stuck in your 3D printer. PLA is an environmentally friendly and recyclable type of plastic. With this material you can print objects in any shape, in detail. PLA filament is harder and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	RAL colour no:	7045
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00107
Brand:	BASF

Order now, we can ship this tomorrow!

£23.20 (Incl. 20% VAT)
(£19.33 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 0.75kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF provides even faster and more consistent 3D printing. The sturdy and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually immune to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed objects, such as tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One Tough	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	5.2 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00176

Order now, we can ship this tomorrow!

£31.78 (Incl. 20% VAT)
(£26.48 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 2.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF provides even faster and more consistent 3D printing. The sturdy and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually insensitive to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed objects, such as tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15 - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	2.5 kg	Our item no:	DFB00179

Order now, we can ship this tomorrow!

£73.01 (Incl. 20% VAT)
(£60.84 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 4.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually immune to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 35.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-60 °C	Spool width:	10.0 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	4.5 kg	Our item no:	DFB00182

Order now, we can ship this tomorrow!

£139.80 (Incl. 20% VAT)
(£116.50 Excl. 20% VAT)

in stock

BASF Ultrafuse grey PLA Pro1 filament 1.75mm, 8.5kg

Zoom in

Description This high-quality Ultrafuse Pro1 Tough PLA filament from BASF is a guarantee for even faster and more consistent 3D printing. The extra strong and versatile material is as strong as ABS (one of the strongest filament types). Yet you can print with it just as easily as the very user-friendly PLA.

The grey-coloured filament has a diameter of 1.75mm and an ideal print temperature of 220°C. For best results, print with a heated bed of 60°C. This filament does not shrink during cooling. The ultra-strong PLA is also virtually immune to warping.

The Ultrafuse Pro1 Tough PLA is especially suitable for industrial applications where a lot of force is exerted on the printed object. Think of printing tools or parts for your 3D printer.

Tip: keep this filament in a dry and cool place (15°C - 25°C) to ensure quality and durability.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	PLA Pro One	Outer diameter:	Ø 37.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.5 cm
Heated bed temp:	0-60 °C	Spool width:	17.0 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	8.5 kg	Our item no:	DFB00185

£244.00 (Incl. 20% VAT)
(£203.33 Excl. 20% VAT)

14 day delivery

colorFabb grey-silver LW-PLA filament 1.75mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light, but retain good strength. In addition, they are easy to cut, trim and sand. The filament in the colour grey-silver has a diameter of 1.75mm and provides a matte finish. The filament starts to foam at about 230°C, increasing it up to almost 3 x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	grey/silver	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13020
Length:	250 m

Order now, we can ship this tomorrow!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

colorFabb dark grey LW-PLA-HT filament 1.75mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 1.75mm and has a dark grey colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13251
Amount:	0.75 kg

Order now, we can ship this tomorrow!

£37.79 (Incl. 20% VAT)
(£31.49 Excl. 20% VAT)

in stock

colorFabb LW-PLA-HT Filament Dark Gray 2.85 mm 0.75 kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85 mm and has a dark gray color.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13252
Amount:	0.75 kg

£39.40 (sold out) (Incl. 20% VAT)
(£32.83 Excl. 20% VAT)

colorFabb light grey PLA Economy filament 1.75mm, 2.2kg

Zoom in

Description This light grey colorFabb filament has a diameter of 1.75mm. PLA is an environmentally friendly and recyclable high-quality plastic. With this material you can easily print objects in any shape, in detail. PLA filament is stronger and shinier than ABS and you do not need a heated bed for a high-quality result.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA economy	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	0-60 °C	Spool width:	10.2 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	2.2 kg	Our item no:	DFP13098
Length:	750 m

Order now, we can ship this tomorrow!

£36.95 (Incl. 20% VAT)
(£30.79 Excl. 20% VAT)

in stock

colorFabb blue-grey PLA/PHA filament 1.75mm, 0.75kg

Zoom in

Description Print quality 3D objects with ease with this colorFabb PLA/PHA filament in the colour blue-grey. PLA/PHA consists of a mix of bioplastics and is recyclable. It has good hardness and is less brittle than other filaments. The blue-grey colour is perfect for creating neutral prints. This filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	blue grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13116
Length:	250 m

Order now, we can ship this tomorrow!

£18.25 (Incl. 20% VAT)
(£15.21 Excl. 20% VAT)

in stock

colorFabb steel Steelfill filament 1.75mm, 0.75kg

Zoom in

Description Give prints a robust, metal look with Steelfill colorFabb filament. Once the object has been printed, then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 0.75kg. We recommend a print temperature of 190°C to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	steel fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13161
Length:	80 m

Order now, we can ship this tomorrow!

£44.50 (Incl. 20% VAT)
(£37.08 Excl. 20% VAT)

in stock

colorFabb steel Steelfill filament 1.75mm, 1.5kg

Zoom in

Description Give prints a robust, metal look with Steelfil colorFabb filament. Once the object has been printed then you can polish and sand it. This makes it almost as if your 3D print came out of a metal workshop! This filament has a diameter of 1.75mm and a weight of 1.5kg. We recommend a print temperature of 190 to 210°C and a print speed of 40 to 80mm/s.

Note: We recommend using a hardened steel nozzle for this filament.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	steel fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-210 °C	Hazard class:	n/a
Amount:	1.5 kg	Our item no:	DFP13160
Length:	160 m

Order now, we can ship this tomorrow!

£84.80 (Incl. 20% VAT)
(£70.67 Excl. 20% VAT)

in stock

colorFabb light grey Stonefill filament 1.75mm, 0.7kg

Zoom in

Description This colorFabb Stonefill 3D filament consists entirely of biological material. The unique combination of fillers gives the print a speckled surface, creating a realistic stone look. Because no real stone powder has been added, this filament prints easier than many alternatives. The surface finish is matte and the layer lines are barely visible.

This light grey colorFabb filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	stone fill	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	light grey	Filament print speed:	-
Nozzle temp range:	195-220 °C	Hazard class:	n/a
Amount:	0.7 kg	Our item no:	DFP13205

Order now, we can ship this tomorrow!

£31.40 (Incl. 20% VAT)
(£26.17 Excl. 20% VAT)

in stock

eSun ePLA-Matte filament 1.75 mm Dark Gray 1 kg (paper spool)

Zoom in

Description This eSun ePLA-Matte filament in the color Dark Gray is an easy to print, odorless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	45-60 °C	Spool width:	6.4 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20252
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

eSun ePLA-Matte filament 1.75 mm Light Khaki 1 kg (paper spool)

Zoom in

Description This eSun ePLA-Matte filament in the color Light Khaki is an easy to print, odorless and environmentally friendly material. This matte PLA has better stiffness than ABS, the same strength as PC and does not need to be printed with a housing. ePLA-Matte shrinks little, does not deform or break. It is also suitable for making large prints. Any supports can be easily removed and layer lines are almost invisible. This makes it a popular choice for making decorative prints, cosplay parts and prototypes, among other things.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	45-60 °C	Spool width:	6.4 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFE20253
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.35 (Incl. 20% VAT)
(£13.63 Excl. 20% VAT)

in stock

eSun ePLA-ST filament 1.75 mm Gray 1 kg

Zoom in

1
0

Description This gray eSun ePLA-ST filament has high impact resistance, stretches before breaking, is strong and can be printed very accurately. It is a strong PLA filament that has better hardness than PETG and can be printed as smoothly as PLA. This makes this filament suitable for making mechanical parts that need to be printed strongly and accurately.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	45-60 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	200-230 °C	Our item no:	DFE20259
Amount:	1 kg

Order now, we can ship this tomorrow!

£18.75 (Incl. 20% VAT)
(£15.63 Excl. 20% VAT)

in stock

eSun grey PLA+ Refill filament 1.75mm, 1kg

Zoom in

Description With the PLA+ Refill filament from eSun you save money and make an environmentally friendly choice. The material is supplied without coil. eSun's grey filament is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Amount:	1 kg
Material:	PLA matte	Brand:	eSun
Filament diameter:	1.75 mm	Inner diameter:	Ø 9.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20211

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

eSun PLA+ filament 1.75mm Grey 1kg

Zoom in

1
0

Description eSun's grey PLA+ filament is an environmentally friendly filament. The material is easy to print and has a smooth surface. PLA+ is strong, has good toughness, high impact resistance and hardly breaks. You use PLA+ filament for printing functional parts, prototyping and modelling. This eSun PLA+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-50 °C	Spool width:	6.5 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFE20094
Amount:	1 kg

Order now, we can ship this tomorrow!

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PLA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear grey colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190°C to 230°C. We recommend a temperature between 25°C and 60°C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14064

Order now, we can ship this tomorrow!

£25.38 (Incl. 20% VAT)
(£21.15 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PLA filament 1.75mm, 3kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75mm and a clear grey colour. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14216

£69.98 (Incl. 20% VAT)
(£58.32 Excl. 20% VAT)

14 day delivery

Polymaker PolyLite PLA filament 1.75 mm Steel Gray 1 kg

Zoom in

Description The Polymaker PolyLite is a high-quality and reliable PLA filament with a diameter of 1.75 mm and a steel gray color. PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, down to the last detail. PLA filament is harder and shinier than ABS. The ideal printing temperature is 190 to 230 °C. We recommend a temperature between 25 and 60 °C for the heated bed.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14301

Order now, we can ship this tomorrow!

£24.80 (Incl. 20% VAT)
(£20.67 Excl. 20% VAT)

in stock

Polymaker PolyLite grey PLA Pro filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite grey PLA Pro filament is of high-quality in toughness, stiffness and impact resistance. The filament offers technical properties and is just as easy to print as standard PLA. This Polymaker PLA Pro filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	30-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14253

Order now, we can ship this tomorrow!

£28.79 (Incl. 20% VAT)
(£23.99 Excl. 20% VAT)

in stock

Polymaker PolyLite Silk PLA filament 1.75 mm Chrome 1 kg

Zoom in

Description Print your designs with a glossy effect with the chrome PLA Silk filament from Polylite. The filament is made of PLA material, this material ensures that your prints are strong and durable. This versatile filament has a special surface finish. This makes the individual print layers on the side surfaces less visible, resulting in a smooth surface.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14336

Order now, we can ship this tomorrow!

£27.98 (Incl. 20% VAT)
(£23.32 Excl. 20% VAT)

in stock

Polymaker PolyMax grey PLA filament 1.75mm, 0.75kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright grey colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14102

Order now, we can ship this tomorrow!

£36.00 (Incl. 20% VAT)
(£30.00 Excl. 20% VAT)

in stock

Polymaker PolyMax grey PLA Tough filament 1.75mm, 3kg

Zoom in

Description Polymaker PolyMax is an advanced and easy to print PLA filament with a diameter of 1.75mm and a bright grey colour. Thanks to the Nano-reinforcement technology, this material offers you even better mechanical properties and print quality.

PLA is an environmentally friendly and recyclable type of plastic. With this material you can easily print objects in any shape, in detail. PLA filament is harder and shinier than ABS. The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14218

Order now, we can ship this tomorrow!

£145.05 (Incl. 20% VAT)
(£120.88 Excl. 20% VAT)

in stock

Polymaker PolySonic PLA filament 1.75 mm Gray 1 kg

Zoom in

Description PolySonic PLA filament from Polymaker is a real game changer in the world of 3D printing. This filament can be printed at very high speed without sacrificing quality. The fast extrusion, high precision and excellent layer adhesion allow you to get maximum benefit from your high-speed printer. Discover PolySonic PLA gray now and reduce your printing time without losing strength or quality.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	210-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14377

Order now, we can ship this tomorrow!

£28.59 (Incl. 20% VAT)
(£23.83 Excl. 20% VAT)

in stock

Polymaker PolyTerra fossil grey PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. This extra smooth PolyTerra filament in the colour 'Fossil Grey' has a matte look and is partly of natural origin. The packaging and coil are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190°C to 230°C. For best results, use a heated bed of 25°C to 60°C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	fossil grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14148

Order now, we can ship this tomorrow!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra PLA filament 1.75 mm Fossil Gray 3 kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75 mm. This material is stronger than regular PLA and you can print objects faster with it. The extra smooth PolyTerra filament in the color 'Fossil Grey' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and for every spool sold, Polymaker plants a tree.

The ideal printing temperature of this filament is 190 to 230 °C. For best results, use a heated bed at 25 to 60 °C.

Read more about printing with PLA filament here .

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	25-60 °C	Spool width:	11.9 cm
Colour:	fossil grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14354

Order now, we can ship this tomorrow!

£48.98 (Incl. 20% VAT)
(£40.82 Excl. 20% VAT)

in stock

Polymaker PolyTerra marble slate grey PLA filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA filament with a diameter of 1.75mm. This material is stronger than regular PLA and allows you to print objects faster. The extra smooth PolyTerra filament in the colour 'Marble Slate Gray' has a matte look and is partly of natural origin. The packaging and spool are made from recycled cardboard and Polymaker plants a tree for every spool sold.

The ideal print temperature of this filament is 190 to 230 °C. For best results, use a heated bed of 25 to 60 °C.

Read more about printing with PLA filament here.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	marble slate grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14233

Order now, we can ship this tomorrow!

£17.44 (Incl. 20% VAT)
(£14.53 Excl. 20% VAT)

in stock

Polymaker PolyTerra grey PLA+ filament 1.75mm, 1kg

Zoom in

Description Polymaker PolyTerra is an environmentally friendly and reliable PLA+ filament with a diameter of 1.75mm. This material is stronger than regular PLA and you print objects faster with it. PLA+ filament is also optimised for better layer adhesion. The PolyTerra filament in the colour 'grey' has a silky smooth finish and is partly of natural origin. Polymaker plants a tree for every spool sold.

The ideal printing temperature for this filament is 190 to 230°C. For the best result, use a heated bed of 25 to 60°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA matte	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	190-230 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14244

Order now, we can ship this tomorrow!

£20.98 (Incl. 20% VAT)
(£17.48 Excl. 20% VAT)

in stock

Polymaker PolyTerra Dual PLA filament 1.75 mm Foggy Orange (Grey-Orange) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Foggy Orange color is orange on one side and gray on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14385
Amount:	1 kg

Order now, we can ship this tomorrow!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

Polymaker PolyTerra Dual PLA filament 1.75 mm Foggy Purple (Grey-Purple) 1 kg

Zoom in

2
1
0

Description PolyTerra is a durable, improved PLA filament from Polymaker. It is easy to print with, very reliable and produces high quality prints. This PLA has a matte appearance and is easy to sand and paint. A tree is planted for every reel sold. The Foggy Purple color is purple on one side and gray on the other. The filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	6.8 cm
Colour:	-	Hazard class:	n/a
Nozzle temp range:	190-230 °C	Our item no:	DFP14386
Amount:	1 kg

Order now, we can ship this tomorrow!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

123-3D Filament Bestsellers PLA bundle 8.8kg (Jupiter Series) Total 8.8kg!

123-3D Filament Bestsellers PLA bundle 8.8kg (Jupiter Series) DFE00063

Zoom in

Description 123-3D PLA Filament is designed with an affordable price in mind, suitable for any maker from beginner to advanced. Thanks to its high quality, the 123-3D PLA Filament is less brittle and has better hardness than standard PLA. Are you just as convinced? Then take advantage of extra benefits thanks to this discount package of over 8.5kg!

This bundle contains 8 x 1.1kg spools of our 123-3D 1.75mm filament. The colours included are black, white, dark blue, neutral, red, yellow, grey and orange.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	PLA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-55 °C	Inner diameter:	Ø 5.2 cm
Colour:	multi colour	Spool width:	6.8 cm
Nozzle temp range:	195 - 235	Hazard class:	n/a
Amount:	8.8 kg	Our item no:	DFE00063

Order now, we can ship this tomorrow!

£118.80 5% discount:

£112.86 (Incl. 20% VAT)
(£94.05 Excl. 20% VAT)

in stock

MatX AMBX-PLA Antimicrobial filament Mouse Gray 1.75 mm 0.75 kg

Zoom in

1
0

Description Discover the revolutionary MatX AMBX-PLA Antimicrobial filament: a groundbreaking innovation in the world of safe 3D printing. This unique product stands out as the first 3D printer filament to provide effective antimicrobial properties without the use of harmful biocides. The MatX AMBX filament is anti-microbial and lab tests* show that it contains >99.99% fewer bacteria compared to standard PLA, the AMBX technology used is 100% safe for both humans and the environment.

This high-quality anti-microbial filament is ideal for printing:

Medical supplies
household applicationss

The MatX AMBX-PLA Antimicrobial filament in Mouse Gray is supplied on a transparent spool, compatible with all common 3D printers and material stations. For optimal life of the filament, we recommend storage in a dry and dark environment after use.

The MatX AMBX filament has a diameter of 1.75 mm and contains 0.75 kg of high-quality filament on a transparent spool. This innovative product guarantees safety, durability and excellent performance in 3D printing. With MatX AMBX you choose the future of antimicrobial and safe printing.

*Based on lab testing: ISO22196

Extra information:

Specifications

Tunnel code:	n/a	Nozzle temp range:	190-215
Material:	AMBX PLA	Amount:	0.75 kg
Filament diameter:	1.75 mm	Brand:	mATX
Heated bed temp:	0-60	Hazard class:	n/a
Colour:	grey	Our item no:	DFP15007

£49.80 (Incl. 20% VAT)
(£41.50 Excl. 20% VAT)

14 day delivery

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this tomorrow!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this tomorrow!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this tomorrow!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this tomorrow!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this tomorrow!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this tomorrow!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this tomorrow!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this tomorrow!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this tomorrow!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this tomorrow!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this tomorrow!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this tomorrow!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this tomorrow!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

Order now, we can ship this tomorrow!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this tomorrow!

£127.94 (Incl. 20% VAT)
(£106.62 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Grey

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Grey