PVA X3045 Duo CoLiDo 3D printer brand 3D filament eSun PVA filament 1.75mm Neutral 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

eSun PVA filament 1.75mm Neutral 0.5kg PVA175N05 DFE20119

Description

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PVA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	0-80 °C	Spool width:	3.5 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	180-210 °C	Our item no:	DFE20119
Amount:	0.5 kg

£26.95 (Incl. 20% VAT)
(£22.46 Excl. 20% VAT)

14 day delivery

Polymaker PolyDissolve natural S1 filament 1.75mm, 0.75kg

Zoom in

Description This natural-coloured Polymaker Polydissolve S1 is a soluble filament. With this filament, you'll have greater design freedom. Polydissolve S1 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 1.75mm and a weight of 0.75kg.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polydissolve S1	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	210-225 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14010

Order now, we can ship this today!

£55.86 (Incl. 20% VAT)
(£46.55 Excl. 20% VAT)

in stock

Polymaker PolyDissolve natural S2 filament 1.75mm, 0.5kg

Zoom in

Description Polymaker Polydissolve S2 is a soluble filament in a colour natural. With this filament you'll have greater design freedom, because many new applications are possible. Polydissolve S2 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 1.75mm and a weight of 0.5kg.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polydissolve S2	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-110 °C	Spool width:	4.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFP14012

£192.75 (Incl. 20% VAT)
(£160.63 Excl. 20% VAT)

14 day delivery

REAL filament neutral 1.75 mm PVA 0.5 kg

Zoom in

2
1
0

Description This Real PVA (PolyVinylAlcohol) filament is a (warm) water soluble filament that is ideal to use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the spool at room temperature under the dryest possible conditions after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C

Read more about printing with PVA filament here .

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PVA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-50 °C	Spool width:	7.0 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFP02384
Amount:	0.5 kg	Replaces item no:	DFV02000
Brand:	REAL

Order now, we can ship this today!

£33.96 5% discount:

£32.26 (Incl. 20% VAT)
(£26.88 Excl. 20% VAT)

in stock

REAL neutral PVA Plus filament 1.75mm, 0.5kg

Zoom in

Description This neutral PVA Plus is the ideal support filament (1.75mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Plus	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02002
Length:	170 m

Order now, we can ship this today!

£40.76 5% discount:

£38.72 (Incl. 20% VAT)
(£32.27 Excl. 20% VAT)

in stock

REAL neutral PVA Pro filament 1.75mm, 0.5kg

Zoom in

Description The neutral PVA Pro is the ideal support filament (1.75mm) for ABS. This material is suitable for printing at temperatures up to 250°C. PVA Pro adheres perfectly to ABS, ASA and TPU98A. The material dissolves slowly, but completely, in lukewarm, running water. This makes it possible to create cavities and floating parts in your ABS 3D prints.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Pro	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02004
Length:	170 m

Order now, we can ship this today!

£40.76 5% discount:

£38.72 (Incl. 20% VAT)
(£32.27 Excl. 20% VAT)

in stock

Scaffold filament Gray 1.75 mm / 0.5 kg spoolWorks

Zoom in

Description Scaffold is a water-soluble and biodegradable support filament that really works.

Scaffold offers total design freedom, allowing you to create complex geometries and fully functioning mechanisms in a single print (without worrying about overhang!). Scaffold is part of E3D's spoolWorks range and works best with PLA filaments.

Specifications

Tunnel code:	n/a	Brand:	spoolWorks
Material:	PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.1 cm
Heated bed temp:	20-50 °C	Spool width:	6.6 cm
Colour:	grey	Hazard class:	n/a
Nozzle temp range:	200-230 °C	Our item no:	DFA00056
Amount:	0.5 kg

£44.00 (sold out) (Incl. 20% VAT)
(£36.67 Excl. 20% VAT)

Zortrax DSS Station

Zoom in

Description Use Zortrax's DSS Station to automatically remove water-soluble carriers. Fill the device with water and place your model in the machine. After a few hours, the support structures are removed. The Zortrax DSS Station is suitable for Z-SUPPORT, Z-SUPPORT Plus and Z-SUPPORT Premium materials. It is also compatible with all water-soluble filaments.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Dimensions:	235 x 238 x 295 mm	Weight:	8.4 kg
Power rating:	1,000 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR00830

£538.50 (sold out) (Incl. 20% VAT)
(£448.75 Excl. 20% VAT)

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this today!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this today!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this today!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this today!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this today!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

14 day delivery

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

Order now, we can ship this today!

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

PVA

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

PVA