1.75mm ASA A6 Anet 3D printer brand 3D filament 123-3D Filament Black 1.75 mm ASA 1 kg (Jupiter series) 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

123-3D Filament Black 1.75 mm ASA 1 kg (Jupiter series)

2
1
0

Description This black ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75 mm and there is 1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Inner diameter:	Ø 5.2 cm
Colour:	black	Spool width:	6.8 cm
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP01108

Order now, we can ship this today!

£29.50 20% discount:

£23.60 (Incl. 20% VAT)
(£19.67 Excl. 20% VAT)

in stock

123-3D Filament Gray 1.75 mm ASA 1 kg

Zoom in

2
1
0

Description This gray ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75 mm and there is 1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Inner diameter:	Ø 5.2 cm
Colour:	grey	Spool width:	6.8 cm
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP01104

Order now, we can ship this today!

£29.50 20% discount:

£23.60 (Incl. 20% VAT)
(£19.67 Excl. 20% VAT)

in stock

123-3D Filament Neutral 1.75 mm ASA 1 kg (Jupiter series)

Zoom in

2
1
0

Description This neutral ASA filament can be perfectly used as a replacement for ABS filament. It is ideal for outdoor use and can withstand exposure to UV radiation. In addition, it has higher heat resistance and stronger chemical bonds. With the 123-3D ASA filament you choose a filament that shines, is sturdy and suitable for outdoor use. This filament has a diameter of 1.75 mm and there is 1 kg on the spool.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	75-105 °C	Inner diameter:	Ø 5.2 cm
Colour:	neutral	Spool width:	6.8 cm
Nozzle temp range:	245-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP01106

Order now, we can ship this today!

£29.50 20% discount:

£23.60 (Incl. 20% VAT)
(£19.67 Excl. 20% VAT)

in stock

REAL blue ASA filament 1.75mm, 1kg

Zoom in

Description The blue ASA is a highly modified filament (1.75mm) with excellent mechanical properties. This filament is very user-friendly; compared to ABS, 3D printing with ASA is a lot easier. ASA does not warp and adheres perfectly to the print bed. In addition, objects made of this material look aesthetically perfect and are UV resistant.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA	RAL colour no:	5002
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	80-90 °C	Outer diameter:	Ø 20.0 cm
Colour:	blue	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	235-255 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	400 m	Our item no:	DFS02002

Order now, we can ship this today!

£21.24 5% discount:

£20.18 (Incl. 20% VAT)
(£16.82 Excl. 20% VAT)

in stock

REAL filament blue 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This blue 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02012

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament yellow 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This yellow 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02021

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament gray 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This gray 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02013

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament green 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This green 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02014

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament light green 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This light green 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	light green	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02015

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament neutral 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This neutral 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02016

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament orange 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This orange 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02017

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL red ASA filament 1.75mm, 1kg

Zoom in

Description The red ASA is a highly modified filament (1.75mm) with excellent mechanical properties. This filament is very user-friendly; compared to ABS, 3D printing with ASA is a lot easier. ASA does not warp and adheres perfectly to the print bed. In addition, objects made of this material look aesthetically perfect and are UV resistant.

Specifications

Tunnel code:	n/a	RAL colour no:	3020
Material:	ASA	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	80-90 °C	Inner diameter:	Ø 5.5 cm
Colour:	red	Spool width:	8.0 cm
Nozzle temp range:	230-250 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02006
Brand:	REAL

This product can be ordered 1 time(s).

Order now, we can ship this today!

£33.58 10% discount:

£30.22 (Incl. 20% VAT)
(£25.18 Excl. 20% VAT)

in stock

REAL filament red 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This red 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02018

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL white ASA filament, 1.75mm, 1kg

Zoom in

Description The white ASA is a highly modified filament (1.75mm) with excellent mechanical properties. This filament is very user-friendly; compared to ABS, 3D printing with ASA is a lot easier. ASA does not warp and adheres perfectly to the print bed. In addition, objects made of this material look aesthetically perfect and are UV resistant.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA	RAL colour no:	9003
Filament diameter:	1.75 mm	Roundness:	above 95 percent
Heated bed temp:	80-90 °C	Outer diameter:	Ø 20.0 cm
Colour:	white	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	235-255 °C	Spool width:	8.0 cm
Amount:	1 kg	Hazard class:	n/a
Length:	400 m	Our item no:	DFS02008

Order now, we can ship this today!

£21.24 5% discount:

£20.18 (Incl. 20% VAT)
(£16.82 Excl. 20% VAT)

in stock

REAL filament white 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This white 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02019

Order now, we can ship this today!

£37.83 10% discount:

£34.05 (Incl. 20% VAT)
(£28.38 Excl. 20% VAT)

in stock

REAL filament black 1.75 mm ASA Low Warp 1 kg

Zoom in

Description This black 1.75 mm Low Warp ASA filament from REAL is the ideal material for making outdoor prints. The water, UV and heat-resistant material is perfectly resistant to moisture and weather influences. In addition, it can withstand impact well, hardly shrinks, is flexible and harder than ABS, which makes this material very popular among many users. It is easy to print without a heated chamber and at relatively high speeds. Low Warp ASA is an extremely versatile filament that allows you to create functional and outdoor prints with ease.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	ASA Low Warp	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	55-85 °C	Spool width:	7.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	205 - 245 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02010

Order now, we can ship this today!

£33.79 10% discount:

£30.41 (Incl. 20% VAT)
(£25.34 Excl. 20% VAT)

in stock

REAL filament black 1.75 mm ASA-CF 1kg

Zoom in

Description ASA-CF filament from REAL has all the benefits of standard ASA with the addition of 10% carbon particles, which provides better reliability and stiffness. It is easy to print, has good bonding between layers and has a beautiful matte appearance. In addition, it is just as water, UV and heat resistant as standard ASA and prints from this material can be used perfectly outdoors. With ASA-CF you get a strong and low-shrink filament that is perfect for prints that must also be able to easily withstand different weather conditions.

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	85-115 °C	Spool width:	7.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	230-265 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFS02022

Order now, we can ship this today!

£50.58 10% discount:

£45.52 (Incl. 20% VAT)
(£37.93 Excl. 20% VAT)

in stock

BASF Ultrafuse neutral ASA filament 1.75mm, 0.75kg

Zoom in

Description This neutral BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Tunnel code:	n/a	Brand:	BASF
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100-120 °C	Spool width:	5.2 cm
Colour:	neutral	Filament print speed:	-
Nozzle temp range:	260-280 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00038

Order now, we can ship this today!

£38.02 (Incl. 20% VAT)
(£31.68 Excl. 20% VAT)

in stock

BASF Ultrafuse black ASA filament 1.75mm, 0.75kg

Zoom in

Description This black BASF Ultrafuse ASA filament has a diameter of 1.75mm and a high-gloss look. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and more weather resistant than standard PLA filament.

ASA is known for its anti-static properties, UV stability and high temperature resistance up to 96°C. It doesn't warp and adheres perfectly to the print bed. You can also print with ASA a lot easier than, for example, ABS. With Ultrafuse ASA filament you can print all kinds of outdoor objects.

Specifications

Tunnel code:	n/a	RAL colour no:	9005
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	100-120 °C	Spool width:	5.2 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	260-280 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFB00039
Brand:	BASF

Order now, we can ship this today!

£34.94 (Incl. 20% VAT)
(£29.12 Excl. 20% VAT)

in stock

ColorFabb natural ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in a natural colour has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance up to 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13000
Length:	250 m

Order now, we can ship this today!

£20.20 (Incl. 20% VAT)
(£16.83 Excl. 20% VAT)

in stock

ColorFabb black ASA filament 1.75mm, 0.65kg

Zoom in

Description This ColorFabb filament in the colour black has a diameter of 1.75mm and consists of a unique mix of PLA and PHA. This makes it stronger, harder and less brittle compared to standard PLA filament. In addition, ASA is known for its UV stability and high temperature resistance of 96°C. ASA printed materials are therefore suitable for long-term use. Compared to ABS, printing with ASA is a lot easier. ASA filament does not warp and adheres perfectly to the print bed.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13001
Length:	90 m

Order now, we can ship this today!

£18.60 (Incl. 20% VAT)
(£15.50 Excl. 20% VAT)

in stock

ColorFabb natural LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The natural LW-ASA filament from colorFabb has a diameter of 1.75mm. This type of lightweight ASA filament consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C - 100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13016
Length:	250 m

Order now, we can ship this today!

£27.65 (Incl. 20% VAT)
(£23.04 Excl. 20% VAT)

in stock

ColorFabb black LW-ASA filament 1.75mm, 0.65kg

Zoom in

Description The black LW-ASA filament from colorFabb has a diameter of 1.75mm. This type of lightweight ASA filament consists of foam. With LW-ASA you have up to 2.5 times more print volume, so you can print parts with a reduced flow rate of up to 40%. This reduced flow rate makes it easy to create lightweight, low-density parts. Printed objects are resistant to UV light and temperatures up to 96°C.

Note: the colour may vary.

Print recommendation: use a heated platform of 90°C - 100°C (or higher). Print a tube around your model or use a housing. This reduces the cold airflow and better maintains the temperature in the print chamber.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.65 kg	Our item no:	DFP13014
Length:	250 m

Order now, we can ship this today!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

eSun eASA filament 1.75 mm Black 1 kg

Zoom in

Description eSun eASA filament has mechanical properties equal to those of ABS. In addition, eASA is more resistant to bad weather conditions and UV radiation. The strength and stiffness, in combination with the high impact resistance, make this filament ideal for outdoor prints.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	90-110 °C	Spool width:	6.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	240 - 270 °C	Our item no:	DFE20231
Amount:	1 kg

Order now, we can ship this today!

£22.75 (Incl. 20% VAT)
(£18.96 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Army Brown 1 kg

Zoom in

Description This army brown Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	army brown	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14282

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Army Green 1 kg

Zoom in

Description This army green Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	army green	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14278

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 1kg

Zoom in

Description This Polymaker PolyLite black ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240°C to 260°C. For best results, use a heated bed of 75°C to 95°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14054

Order now, we can ship this today!

£29.96 (Incl. 20% VAT)
(£24.97 Excl. 20% VAT)

in stock

Polymaker PolyLite black ASA filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14180

Order now, we can ship this today!

£82.97 (Incl. 20% VAT)
(£69.14 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Black 5 kg

Zoom in

Description This black Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 30.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 3.2 cm
Heated bed temp:	75-95 °C	Spool width:	16.0 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	5 kg	Our item no:	DFP14284

Order now, we can ship this today!

£154.00 (Incl. 20% VAT)
(£128.33 Excl. 20% VAT)

in stock

Polymaker PolyLite blue ASA filament 1.75mm, 1kg

Zoom in

Description This blue Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14181

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Green 1 kg

Zoom in

Description This green Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14279

Order now, we can ship this today!

£29.99 (Incl. 20% VAT)
(£24.99 Excl. 20% VAT)

in stock

Polymaker PolyLite grey ASA filament 1.75mm, 1kg

Zoom in

Description This grey Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14183

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Gray 3 kg

Zoom in

Description This gray Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14283

Order now, we can ship this today!

£82.95 (Incl. 20% VAT)
(£69.13 Excl. 20% VAT)

in stock

Polymaker PolyLite natural ASA filament 1.75mm, 1kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14185

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite natural ASA filament 1.75mm, 3kg

Zoom in

Description This natural Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14186

£82.98 (Incl. 20% VAT)
(£69.15 Excl. 20% VAT)

14 day delivery

Polymaker PolyLite ASA filament 1.75 mm Orange 1 kg

Zoom in

Description This orange Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	orange	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14276

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Purple 1 kg

Zoom in

Description This purple Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	purple	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14281

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite red ASA filament 1.75mm, 1kg

Zoom in

Description This red Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14189

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Teal 1 kg

Zoom in

Description This Polymaker PolyLite ASA filament in teal has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	teal	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14280

Order now, we can ship this today!

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

in stock

Polymaker PolyLite white ASA filament 1.75mm, 1kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal print temperature is 240°C to 260°C. For best results, use a heated bed of 75°C to 95°C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14056

Order now, we can ship this today!

£25.94 (Incl. 20% VAT)
(£21.62 Excl. 20% VAT)

in stock

Polymaker PolyLite white ASA filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyLite ASA filament has a diameter of 1.75mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96°C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260°C. For best results, use a heated bed of 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	75-95 °C	Spool width:	11.9 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14190

Order now, we can ship this today!

£82.95 (Incl. 20% VAT)
(£69.13 Excl. 20% VAT)

in stock

Polymaker PolyLite ASA filament 1.75 mm Yellow 1 kg

Zoom in

Description This yellow Polymaker PolyLite ASA filament has a diameter of 1.75 mm. ASA consists of a unique mix of high-quality PLA and PHA. This makes it stronger, harder and less brittle than standard PLA filament. ASA is known for its UV stability and high temperature resistance up to 96 °C. It does not warp and adheres perfectly to the print bed. You can also print ASA a lot easier than, for example, ABS.

The ideal printing temperature is 240 to 260 °C. For best results, use a heated bed at 75 to 95 °C.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	ASA	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	75-95 °C	Spool width:	6.8 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14277

£30.49 (Incl. 20% VAT)
(£25.41 Excl. 20% VAT)

14 day delivery

Zortrax graphite Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this graphite Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The grey filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	graphite	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00111
Amount:	0.8 kg

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

Zortrax pure white Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure white Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The white filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	pure white	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00115
Amount:	0.8 kg

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

Zortrax pure black Z-ASA Pro filament 1.75mm, 0.8kg

Zoom in

Description Create durable prints with this pure black Zortrax Z-ASA Pro filament. The material is resistant to weather and UV light, making it perfect for outdoor applications. High temperature resistance allows 3D prints to stand in direct sunlight without deforming or fading. In addition, ASA does not warp and adheres perfectly to a print bed. The black filament has a diameter of 1.75mm and a weight of 800g.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Material:	Z ASA Pro	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 4.4 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	pure black	Hazard class:	n/a
Nozzle temp range:	255-265 °C	Our item no:	DFP00113
Amount:	0.8 kg

£40.46 (sold out) (Incl. 20% VAT)
(£33.72 Excl. 20% VAT)

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now, we can ship this today!

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now, we can ship this today!

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Magigoo Pro 3D glue stick for PC filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00208
Volume:	50

Order now, we can ship this today!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this today!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this today!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this today!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this today!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this today!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

Order now, we can ship this today!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this today!

£127.94 (Incl. 20% VAT)
(£106.62 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

1.75mm ASA

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

1.75mm ASA