Polycarbonate 1.75mm filament 3D filament Polymaker PolyMax white PC filament 1.75mm, 0.75kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

Polymaker PolyMax white PC filament 1.75mm, 0.75kg

Description This white Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	4.5 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14090

Order now, we can ship this today!

£39.49 (Incl. 20% VAT)
(£32.91 Excl. 20% VAT)

in stock

Polymaker PolyMax white PC filament 1.75mm, 3kg

Zoom in

Description This white Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	90-105 °C	Spool width:	11.9 cm
Colour:	white	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14092

£148.95 (Incl. 20% VAT)
(£124.13 Excl. 20% VAT)

14 day delivery

Polymaker PolyMax black PC filament 1.75mm, 0.75kg

Zoom in

Description This black Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	RAL colour no:	-
Material:	polycarbonate	Roundness:	above 95 percent
Filament diameter:	1.75 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90-105 °C	Inner diameter:	Ø 5.5 cm
Colour:	black	Spool width:	4.5 cm
Nozzle temp range:	250-270	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DFP14086

Order now, we can ship this today!

£38.94 (Incl. 20% VAT)
(£32.45 Excl. 20% VAT)

in stock

Polymaker PolyMax black PC filament 1.75mm, 3kg

Zoom in

Description This black Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. As a result, the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	90-105 °C	Spool width:	11.9 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14088

Order now, we can ship this today!

£148.95 (Incl. 20% VAT)
(£124.13 Excl. 20% VAT)

in stock

Polymaker PolyLite transparent PC filament 1.75mm, 1kg

Zoom in

Description With Polymaker PolyLite transparent filament you can print objects of excellent quality. The filament consists of polycarbonate that has been specially developed for 3D printing. PolyLite has good strength and heat resistance. We recommend a print temperature between 200°C and 230°C. The transparent filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	6.8 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	250-270	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14058

Order now, we can ship this today!

£27.45 (Incl. 20% VAT)
(£22.88 Excl. 20% VAT)

in stock

eSun ePC filament 1.75mm Neutral 0.5kg

Zoom in

Description

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	PCL	Outer diameter:	Ø 0.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 0.0 cm
Heated bed temp:	80-120	Spool width:	0.0 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	240 - 270	Our item no:	DFE20042
Amount:	0.5 kg

£22.75 (Incl. 20% VAT)
(£18.96 Excl. 20% VAT)

14 day delivery

Magigoo Pro 3D glue stick for PC filament, 50ml

Zoom in

Description This Magigoo Pro 3D glue stick is specially designed for printing with PC filament. The adhesive stick ensures perfect adhesion of PC-printed objects. Once your print has cooled down, you can simply remove it. This means you no longer need any tools! You use the Magigoo PC glue stick on glass and plastic surfaces. The package contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00208
Volume:	50

Order now, we can ship this today!

£19.85 (Incl. 20% VAT)
(£16.54 Excl. 20% VAT)

in stock

eSun ePC filament 1.75 mm Black 0.5 kg

Zoom in

Description The black ePC filament from eSun has high toughness and impact resistance and is heat resistant. The material has a heat distortion temperature of up to 115 °C and has a long service life. Use the filament for car parts and electronic, electrical and mechanical objects. This eSun ePC filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 0.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 0.0 cm
Heated bed temp:	45-60 °C	Spool width:	0.0 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	260-300 °C	Our item no:	DFE20239
Amount:	0.5 kg

Order now, we can ship this today!

£21.75 (Incl. 20% VAT)
(£18.13 Excl. 20% VAT)

in stock

Polymaker PolyLite PC filament 1.75 mm Transparent 3 kg

Zoom in

Description With Polymaker PolyLite filament transparent you can print objects of excellent quality. The filament consists of polycarbonate that has been specially developed for 3D printing. PolyLite has good stiffness and heat resistance. We recommend a printing temperature between 250 and 270 °C. The transparent filament has a diameter of 1.75 mm.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 25.2 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.4 cm
Heated bed temp:	90-105 °C	Spool width:	11.9 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	3 kg	Our item no:	DFP14363

Order now, we can ship this today!

£88.70 (Incl. 20% VAT)
(£73.92 Excl. 20% VAT)

in stock

Polymaker Polymax PC-FR filament 1.75 mm Black 1 kg

Zoom in

Description Polymax PC-FR Black is a super sturdy, strong and heat resistant filament from Polymaker. The excellent mechanical properties make this filament very useful for various industries such as the automotive and aviation industries. But this filament is also a real asset for private users. The flame retardant properties (V0 in the UL94 test) of this material ensure that it can be used safely at higher temperatures. In addition, it is still very resistant to impact.

Annealing: 2 hours at 90℃

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PC-FR	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	6.8 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	250-270 °C	Our item no:	DFP14364
Amount:	1 kg

Order now, we can ship this today!

£50.79 (Incl. 20% VAT)
(£42.33 Excl. 20% VAT)

in stock

Polymaker Polymax PC-FR filament 1.75 mm White 1 kg

Zoom in

Description Polymax PC-FR White is a super sturdy, strong and heat resistant filament from Polymaker. The excellent mechanical properties make this filament very useful for various industries such as the automotive and aviation industries. But this filament is also a real asset for private users. The flame retardant properties (V0 in the UL94 test) of this material ensure that it can be used safely at higher temperatures. In addition, it is still very resistant to impact.

Annealing: 2 hours at 90℃

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	PC-FR	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	6.8 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	250-270 °C	Our item no:	DFP14365
Amount:	1 kg

Order now, we can ship this today!

£49.74 (Incl. 20% VAT)
(£41.45 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PC filament 1.75 mm Gray 0.75 kg

Zoom in

Description This gray Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. This means the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	4.5 cm
Colour:	grey	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14366

Order now, we can ship this today!

£41.20 (Incl. 20% VAT)
(£34.33 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PC filament 1.75 mm Red 0.75 kg

Zoom in

Description This red Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technology. This means the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	4.5 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14367

Order now, we can ship this today!

£41.20 (Incl. 20% VAT)
(£34.33 Excl. 20% VAT)

in stock

Polymaker PolyMax Tough PC filament 1.75 mm Blue 0.75 kg

Zoom in

Description This blue Polymaker PolyMax™ PC filament is produced with Polymaker's nano-reinforcement technique. This means the filament delivers exceptional print quality. The PC filament combines strength, heat resistance and print quality and can therefore be used for various technical applications.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polycarbonate	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	90-105 °C	Spool width:	4.5 cm
Colour:	blue	Filament print speed:	-
Nozzle temp range:	250-270 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14368

Order now, we can ship this today!

£41.20 (Incl. 20% VAT)
(£34.33 Excl. 20% VAT)

in stock

3DLAC Plus adhesive spray, 100ml

Zoom in

Description The 3DLAC Plus adhesive spray is a new variant of the well-known 3DLAC adhesive spray. It provides excellent bed adhesion for PLA, ABS, PETG and other materials. The spray is water soluble ensuring you are able to easily clean your print surface after printing.

This 100ml bottle of 3DLAC Plus allows you to make hundreds of prints. After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC Plus that they are a bit difficult to remove.

Specifications

Tunnel code:	D/E	Brand:	3DLAC
Diameter:	30 mm	Download SDS:	Download
Volume:	100ml	Hazard class:	3
Height:	150 mm	Our item no:	DVB00018

Order now, we can ship this today!

£6.29 (Incl. 20% VAT)
(£5.24 Excl. 20% VAT)

in stock

3DLAC stick (80ml)

Zoom in

Description This 3DLAC stick is a new variant of the well-known 3DLAC adhesive spray. With the stick you can easily lubricate various surfaces, so that your printed object is perfectly adhered in place. When the plate has completely cooled down, your 3D printed object can easily be removed.

The 3DLAC stick provides excellent bed adhesion for PLA, ABS, PETG and other materials. After use, the bonding platform is easy to clean in water.

Note: PLA and PETG sometimes adhere so well in combination with 3DLAC stick that they are a bit difficult to remove.

Specifications

Tunnel code:	n/a	Brand:	3DLAC
Dimensions:	143 mm	Download SDS:	Download
Diameter:	33 mm	Hazard class:	n/a
Volume:	80ml	Our item no:	DAR00884

Order now, we can ship this today!

£5.74 (Incl. 20% VAT)
(£4.78 Excl. 20% VAT)

in stock

Tesa masking tape, 50mm x 50m

Zoom in

Description This masking tape creates ideal print surfaces for your 3D prints. PLA and PETG filaments adhere well to the fine structure of this adhesive tape.

Specifications

Tunnel code:	n/a	Brand:	Tesa
Width:	50 mm	Hazard class:	n/a
Length:	50 m	Our item no:	DVB00007

Order now, we can ship this today!

£3.90 (Incl. 20% VAT)
(£3.25 Excl. 20% VAT)

in stock

3D print post-processing set

Zoom in

Description This handy finishing kit contains several tools for manually perfecting and repairing your 3D printed objects.

The kit contains:

2 x Blades
2 x Brushes
2 x Scraper
2 x Hooks
2 x Forks
2 x Needle tips

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	steel	Our item no:	DAR00620
Brand:	123-3D

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (181 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 181ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.181 kg	Our item no:	DAR00876
Brand:	-

Order now, we can ship this today!

£20.49 (Incl. 20% VAT)
(£17.08 Excl. 20% VAT)

in stock

Smooth-On XTC-3D coating (644 gr = A+B)

Zoom in

Description With the XTC-3D epoxy coating, you can smooth and finish creations of all 3D printing materials. This product is suitable for ABS, EPS, EPDM and PLA, but also SLS and SLA prints. The liquid epoxy resin fills 3D print streaks and imperfections, creating a smooth, high-gloss protection.

You simply apply the coating with a brush. You mix 2 units of bottle A with 1 unit of the liquid from bottle B. The coating spreads evenly and evenly over your 3D print. The pot life is 10 minutes and the curing time is about 4 hours. After this you can sand or paint your 3D print.

This product contains no VOCs, phthalates or phosphates. With 30 ml of this liquid you can coat more than 100cm². This pack contains a total of 644ml of liquid.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Amount:	0.644 kg	Our item no:	DAR00877
Brand:	-

Order now, we can ship this today!

£51.50 (Incl. 20% VAT)
(£42.92 Excl. 20% VAT)

in stock

Transparent acrylic filament coil holder kit

Zoom in

Description This transparent acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	transparent	Our item no:	DFR00002

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Black acrylic filament coil holder kit

Zoom in

Description This black acrylic coil holder kit is ideal for setting up your filament coils if your printer does not have a coil holder. The holder is provided with a smooth steel tube to place the roll of filament on. Not suitable for coils heavier than 1kg.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	180 x 125 x 160 mm	Hazard class:	n/a
Colour:	black	Our item no:	DFR00003

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

Modifi3D Pro repair/modification tool

Zoom in

Description With the versatile Modifi3D Pro finishing tool you can easily make modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after printing.

The tool works with heat and is easy to connect to mains power using the supplied adapter. After a 25-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams!) the tool is very pleasant to use.

The Modifi3D Pro tool comes with no less than 10 interchangeable tips:

Knife tip: for cutting support material
Large blade point: for cutting support material
Needle point: for clearing small holes
Standard tip: for general use
Spoon tip: for removing wires and smoothing surfaces
Large spoon tip: for removing wires and smoothing surfaces
Detail point: for updating detail work
Ironing point: for levelling surfaces
Countersink point: for countersinking holes
Insertion point: for inserting metal parts

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	30 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	24 v	Our item no:	DGS00090
Cable length:	150 cm

Order now, we can ship this today!

£65.50 (Incl. 20% VAT)
(£54.58 Excl. 20% VAT)

in stock

Modifi3D repair/modification tool

Zoom in

Description With the versatile Modifi3D finishing tool you can easily make minor modifications and repairs to your 3D printed objects. You can also improve the surface finish with this tool. This way you can perfect a 3D object down to the last detail after 3D printing.

The tool works with heat and is easy to connect to a USB port. After a 15-second warm-up time, you can get started right away. Thanks to the compact and light design (only 120 grams) the tool is very pleasant to use.

The Modifi3D tool comes with 4 interchangeable tips:

Knife tip: for cutting support material
Needle point: for clearing small holes
Spoon tip: for removing wires and smoothing surfaces
Standard tip: for general use

All points have a special coating that prevents the plastic from sticking.

Specifications

Tunnel code:	n/a	Brand:	MODIFI3D
Power rating:	8 W	Weight:	0.12 kg
Max operating temp:	450 °C	Hazard class:	n/a
Voltage:	5 v	Our item no:	DGS00007

Extra information

Instructional video

Order now, we can ship this today!

£29.95 (Incl. 20% VAT)
(£24.96 Excl. 20% VAT)

in stock

SUNLU FilaDryer S2 drybox

Zoom in

Description The SUNLU FilaDryer S2 drybox is a handy filament dryer suitable for a wide range of filament types. The S2 is able to distribute the heat faster and more evenly. This also makes the drybox very resistant to cold and damp places such as sheds or cellars.

From the factory, the S2 is equipped with a number of standard settings that make it easier to dry the most common filament types in an instant. A drying program can be selected via the handy touchscreen. The screen also shows useful information such as: Temperature, remaining drying time, material, etc.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Voltage:	24 v
Dimensions:	265 x 118 x 274 mm	Brand:	SUNLU
Power rating:	48 W	Weight:	11.9 kg
Input voltage:	100-240V	Hazard class:	n/a
Temp range:	35-70 °C	Our item no:	DAR00698
Colour:	black

Order now, we can ship this today!

£60.95 (Incl. 20% VAT)
(£50.79 Excl. 20% VAT)

in stock

SUNLU FilaDryer S1 drybox (UK adapter)

Zoom in

Description The FilaDryer S1 Drybox with a UK adapter ensures your filament dries quickly and evenly. You can set the drying time (3 hours - 6 hours) and temperature (35°C - 55°C) yourself, so that you achieve the right result for every type of filament. The settings are clearly displayed on the handy LCD screen.

The SUNLU storage box is suitable for storing and drying filament with a diameter of 1.75mm, 2.85mm or 3mm.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	SUNLU	Our item no:	DFB00007

Order now, we can ship this today!

£42.50 (Incl. 20% VAT)
(£35.42 Excl. 20% VAT)

in stock

Polymaker PolyBox™ Edition II filament drybox

Zoom in

Description The Polymaker PolyBox™ Edition II filament drybox prevents your filament from getting damp. This box allows you to store spools in an optimal environment with six holes in the transparent hood allowing you to guide the filament through. This drybox is equipped with a clear thermo-hygrometer displaying the temperature and humidity. The drybox ensures humidity and moisture regulation through the use of moisture-absorbing desiccant bags. The storage boxes have space for two 1 kg spools or one 3kg roll. 3kg Polymaker brand spools are compatible with this drybox, but our 2.3kg and 3kg 123-3D version will not fit.

Specifications

Tunnel code:	n/a	Manual:	Download (PDF)
Dimensions:	315 x 190 x 310 mm	Hazard class:	n/a
Brand:	Polymaker	Our item no:	DAR00634
Weight:	1.15 kg

Order now, we can ship this today!

£53.98 (Incl. 20% VAT)
(£44.98 Excl. 20% VAT)

in stock

Smart bluetooth hygrometer

Zoom in

Description With this Smart Bluetooth hygrometer you can easily measure the ambient temperature and humidity.

Thanks to its compact size (49.5mm x 49.5mm), this smart hygrometer can easily be placed near your 3D printer, bathroom or storage boxes for food or cigars, for example. Simply set the min-max values via the matching app and receive a notification when the temperature or humidity falls outside this range. The values are stored on the meter for up to 100 days. This way you are always informed.

Download the app from the Google Play store here.
Download the app from the Apple Store here.

The hygrometer comes with a CR2477 button cell battery.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Colour:	white	Our item no:	DRW00069
Brand:	123-3D

Order now, we can ship this today!

£9.95 (Incl. 20% VAT)
(£8.29 Excl. 20% VAT)

in stock

eSun eVacuum kit

Zoom in

1
0

Description The eSun eVacuum kit is ideal for keeping your leftover filament dry. By vacuuming the bags with the pump, you protect your filament against (air) humidity and maintain print quality. The bags are specially designed for spools of filament, close tightly and are compatible with different sizes of 3D filament. The double closing mechanism allows you to achieve the best moisture-resistant effect. The humidity map is sensitive and can accurately indicate how moist the filament is time and time again. The kit is certified by BPA-FREE and FDA and is safe and environmentally friendly.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	eSun	Our item no:	DAR01365

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SUNLU FilaDryer S4

Zoom in

2
1
0

Description Keep your filament dry and in perfect condition with the S4 Drybox from SUNLU. There is room for no less than 4 spools of 1 kg, so you can immediately dry multiple spools at once. The box heats to 50 °C within 30 minutes and keeps the temperature balanced with a margin of 3 °C in the corners. By drying filament thoroughly before starting 3D printing, you can achieve even better results and will significantly improve the quality of your 3D prints.

Versatile and efficient
The drybox can handle many different types of filament, such as PLA, PETG, ABS, PC and TPU. Filaments with diameters of 1.75 mm, 2.85 mm and 3.0 mm can also be easily dried. The combination of the PTC heater and 3 fans ensures increased efficiency. In addition, the box has an automatic humidity control, which monitors and adjusts the temperature and humidity to create ideal conditions.

Other functionalities
There are 8 holes through which you can guide the filament out, so you can also use the box while you are printing. 4 of these holes are on the top and the other 4 are on the sides. This also makes it possible to connect 4 different printers. The top of the box is easy to remove, allowing easy access to the rollers. For added safety, there will be a warning when the temperature is abnormal. The product is 458 x 218 x 312 mm.

Specifications

Tunnel code:	n/a	Brand:	SUNLU
Dimensions:	516 x 278 x 350 mm	Weight:	4.8 kg
Power rating:	320 W	Hazard class:	n/a
Input voltage:	110-240V

Order now, we can ship this today!

£127.94 (Incl. 20% VAT)
(£106.62 Excl. 20% VAT)

in stock

123-3D cleaning filament 1.75mm, 100g

Zoom in

Description With cleaning filament you can clean the hotend of your 3D printer when switching between two filament types or colours. The cleaning filament prevents residues and the mixing of colours. This cleaning filament has a diameter of 1.75mm and has a large temperature range (150°C - 260°C), so that different types of filament can be removed.

Specifications

Tunnel code:	n/a	Amount:	0.1 kg
Filament diameter:	1.75 mm	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	210-225 °C	Our item no:	DFR00000

Order now, we can ship this today!

£8.25 (Incl. 20% VAT)
(£6.88 Excl. 20% VAT)

in stock

3D Printed spool holder (PLA)

Description 3D Printed spool holder (PLA)

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Material:	PLA	Our item no:	DFR00004
Brand:	RepRapWorld

This product can be ordered 1 time(s).

£16.95 (Incl. 20% VAT)
(£14.13 Excl. 20% VAT)

14 day delivery

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

Order now, we can ship this today!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Polycarbonate

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Polycarbonate