Magenta 1.75mm ABS CR-10 Max Creality 3D printer brand 3D filament 2.85mm eSun ABS+ filament 1.75mm Magenta 1kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

eSun ABS+ filament 1.75mm Magenta 1kg DFE20022

Description eSun's magenta ABS+ filament has a high toughness and impact resistance. The material is therefore ideal for printing sturdy and durable objects. ABS+ filament has higher mechanical properties, less odour and a lower shrinkage rate than regular ABS filament. In addition, ABS+ does not crack, hardly warps and contains little VOC. This eSun ABS+ filament has a diameter of 1.75mm.

Specifications

Tunnel code:	n/a	Brand:	eSun
Material:	-	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	95-110 °C	Spool width:	6.5 cm
Colour:	magenta	Hazard class:	n/a
Nozzle temp range:	230-270 °C	Our item no:	DFE20022
Amount:	1 kg

Order now - Ship by 2nd Jan

£16.30 (Incl. 20% VAT)
(£13.58 Excl. 20% VAT)

in stock

XYZprinting magenta ABS filament 1.75mm, 0.6kg (Cartridge)

Zoom in

Description With this magenta XYZprinting ABS filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip and is contained in a cartridge so that it integrates perfectly with the following XYZ da Vinci printers:

da Vinci Jr. Pro X+
da Vinci 1.1 Plus
da Vinci 2.0 A Duo
da Vinci Super
da Vinci 1.0 Pro
da Vinci 1.0 Pro 3-in-1

Specifications

Tunnel code:	n/a	Nozzle temp range:	210-240 °C
Material:	ABS	Amount:	0.6 kg
Filament diameter:	1.75 mm	Brand:	XYZprinting
Heated bed temp:	70-90 °C	Hazard class:	n/a
Colour:	neon magenta	Our item no:	DFA05015

£27.85 (sold out) (Incl. 20% VAT)
(£23.21 Excl. 20% VAT)

XYZprinting magenta ABS filament 1.75mm, 0.6kg (NFC coil)

Zoom in

Description With this magenta XYZprinting ABS filament you can easily print all kinds of objects. The filament is equipped with the XYZ chip so that it integrates perfectly with your printers.

Specifications

Tunnel code:	n/a	Brand:	XYZprinting
Material:	ABS	Outer diameter:	Ø 16.8 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.0 cm
Heated bed temp:	70-90 °C	Spool width:	5.4 cm
Colour:	magenta	Hazard class:	n/a
Nozzle temp range:	210-240 °C	Our item no:	DFA05029
Amount:	0.6 kg

This product is end of life.

123-3D ABS pellets, 1kg

Zoom in

Description ABS pellets can be used by enthusiastic DIY'ers to make ABS filament themselves. The pellets can also be used with a Direct pellet extruder on a 3D printer. This bag contains 1kg of undried pellets, to which no dyes have yet been added.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00001

Order now - Ship by 2nd Jan

£15.85 (Incl. 20% VAT)
(£13.21 Excl. 20% VAT)

in stock

123-3D kapton sticker, 200mm x 200mm

Zoom in

Description Kapton (polyimide) is an electrically insulating, heat-resistant material. These 200mm x 200mm stickers are ideal for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible. With these stickers, you no longer have to draw precise lines with loose tape.

Specifications

Tunnel code:	n/a	Width:	20 cm
Material:	polyimide	Brand:	123-3D
Thickness:	0.06 mm	Hazard class:	n/a
Temp resistance:	Kapton	Our item no:	DVB00002
Length:	20 cm

Order now - Ship by 2nd Jan

£2.60 (Incl. 20% VAT)
(£2.17 Excl. 20% VAT)

in stock

123-3D kapton sticker, 300mm x 300mm

Zoom in

Description Kapton (polyimide) is an electrically insulating, heat-resistant material. These 300mm x 300mm stickers are ideal for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible. With these stickers, you no longer have to draw precise lines with loose tape.

Specifications

Tunnel code:	n/a	Width:	30 cm
Material:	polyimide	Brand:	123-3D
Thickness:	0.06 mm	Hazard class:	n/a
Temp resistance:	Kapton	Our item no:	DVB00003
Length:	30 cm

Order now - Ship by 2nd Jan

£3.50 (Incl. 20% VAT)
(£2.92 Excl. 20% VAT)

in stock

123-3D kapton sticker, 400mm x 400mm

Zoom in

Description Kapton (polyimide) is an electrically insulating, heat-resistant material. These 400mm x 400mm stickers are ideal for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible. With these stickers, you no longer have to draw precise lines with loose tape.

Specifications

Tunnel code:	n/a	Width:	40 cm
Material:	polyimide	Brand:	123-3D
Thickness:	0.06 mm	Hazard class:	n/a
Temp resistance:	Kapton	Our item no:	DVB00004
Length:	40 cm

Order now - Ship by 2nd Jan

£4.40 (Incl. 20% VAT)
(£3.67 Excl. 20% VAT)

in stock

123-3D kapton tape, 100mm x 33m

Zoom in

Description Kapton tape (polyimide tape) is an electrically insulating heat-resistant tape. This tape is extremely suitable for covering the heated bed of the 3D printer to limit the warping of ABS and other filament types as much as possible.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Temp resistance:	Kapton	Our item no:	DVB00001
Brand:	123-3D

Order now - Ship by 2nd Jan

£17.50 (Incl. 20% VAT)
(£14.58 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 120ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 120ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00206
Volume:	120

Order now - Ship by 2nd Jan

£41.95 (Incl. 20% VAT)
(£34.96 Excl. 20% VAT)

in stock

Magigoo 3D glue stick, 50ml

Zoom in

Description The Magigoo 3D glue stick ensures perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, simply remove it! The adhesive stick is easy to use and prevents warping of prints. You can use the glue in combination with the following filament types: ABS, PLA, PETG, HIPS, ASA and TPU. This 3D adhesive stick contains 50ml.

Specifications

Tunnel code:	n/a	Video instructions:	Instructional video
Brand:	Magigoo	Hazard class:	n/a
Type:	glue stick	Our item no:	DCP00205
Volume:	50

Order now - Ship by 2nd Jan

£15.75 (Incl. 20% VAT)
(£13.13 Excl. 20% VAT)

in stock

Magigoo 3D Pro glue stick kit for ABS, PA, PC and PP filament

Zoom in

Description This kit contains four Magigoo 3D glue sticks. The Magigoo 3D Pro glue stick kit is suitable for printing with ABS, PA, PC and PP filament. The sticks ensure perfect adhesion of 3D prints on the print bed. Once your 3D print has cooled down, you can simply remove it. The glue sticks are easy to use and prevent the warping of prints.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Magigoo	Our item no:	DCP00211
Type:	glue stick

£69.95 (Incl. 20% VAT)
(£58.29 Excl. 20% VAT)

Backorder - Due January

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Magenta

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Magenta