2.85mm LW PLA Specialist PLA 2.85mm filament 3D filament 2.85mm colorFabb yellow LW-PLA filament 2.85mm, 0.75kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

colorFabb yellow LW-PLA filament 2.85mm, 0.75kg

Description This yellow LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The yellow filament has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	yellow	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13194
Length:	90 m

Order now, we can ship this on Monday!

£27.75 (Incl. 20% VAT)
(£23.13 Excl. 20% VAT)

in stock

colorFabb grey-silver LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This grey-silver LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour grey-silver has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
Print temperature: 195°C to 260°C
Heated bed temperature: 50°C to 60°C (optional)
Print speed: 40mm/s to 100mm/s
Part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	grey/silver	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13021
Length:	90 m

Order now, we can ship this on Monday!

£27.90 (Incl. 20% VAT)
(£23.25 Excl. 20% VAT)

in stock

colorFabb green LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This green LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. The green filament has a diameter of 2.85mm and provides a matte finish. Because the filament starts to foam at about 230°C, increasing it up to almost 3x in volume. Due to the increase in volume, the weight can be reduced by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (light weight PLA):
print temperature: 195 to 260°C
heated bed temperature: 50 to 60 (optional)
print speed: 40 to 100 mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	green	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13192
Length:	90 m

Order now, we can ship this on Monday!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

colorFabb natural LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This natural coloured LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour natural has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13023
Length:	90 m

Order now, we can ship this on Monday!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

colorFabb red LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This red LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour red has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	red	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13025
Length:	90 m

Order now, we can ship this on Monday!

£27.80 (Incl. 20% VAT)
(£23.17 Excl. 20% VAT)

in stock

colorFabb black LW-PLA filament 2.85mm, 0.75kg

Zoom in

Description This black LW-PLA filament from colorFabb is perfect for printing RC planes, cosplay items and other lightweight parts. Printed objects are very light but retain good strength. In addition, they are easy to cut, trim and sand. This filament in the colour black has a diameter of 2.85mm and provides a matte finish. It also starts to foam at about 230°C, increasing its volume by up to three times its original size, while reducing the weight of your prints by up to 65% compared to normal PLA.

Print recommendation for colorFabb LW-PLA (lightweight PLA):
print temperature: 195°C to 260°C
heated bed temperature: 50°C to 60°C (optional)
print speed: 40mm/s to 100mm/s
part cooling: off

Please note: due to the foaming technique, the colour may vary.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW_PLA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	90-100 °C	Spool width:	5.5 cm
Colour:	black	Filament print speed:	-
Nozzle temp range:	240-260 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP13019
Length:	90 m

Order now, we can ship this on Monday!

£27.90 (Incl. 20% VAT)
(£23.25 Excl. 20% VAT)

in stock

colorFabb LW-PLA-HT Filament Dark Gray 2.85 mm 0.75 kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85 mm and has a dark gray color.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	dark grey	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13252
Amount:	0.75 kg

£39.40 (sold out) (Incl. 20% VAT)
(£32.83 Excl. 20% VAT)

colorFabb white LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and is white in colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	white	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13246
Amount:	0.75 kg

Order now, we can ship this on Monday!

£39.40 (Incl. 20% VAT)
(£32.83 Excl. 20% VAT)

in stock

colorFabb black LW-PLA-HT filament 2.85mm, 0.75kg

Zoom in

Description colorFabb's LW-PLA-HT filament has a high temperature resistance and can handle heat from external sources well thanks to the thin printed structures. This filament is ideal for printing RC planes, cosplay and other lightweight parts. The parts are easy to cut, cut and tear. This filament has a diameter of 2.85mm and is black in colour.

Specifications

Tunnel code:	n/a	Brand:	colorFabb
Material:	LW PLA HT	Outer diameter:	Ø 20.0 cm
Filament diameter:	1.75 mm	Inner diameter:	Ø 5.2 cm
Heated bed temp:	50-60 °C	Spool width:	5.5 cm
Colour:	black	Hazard class:	n/a
Nozzle temp range:	-	Our item no:	DFP13248
Amount:	0.75 kg

Order now, we can ship this on Monday!

£39.40 (Incl. 20% VAT)
(£32.83 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

5
4
3
2
1
0

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

2.85mm LW PLA

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

2.85mm LW PLA