PVA 2.85mm filament 3D filament 2.85mm REAL neutral PVA Plus filament 2.85mm, 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

REAL neutral PVA Plus filament 2.85mm, 0.5kg

Description This neutral REAL PVA Plus is the ideal support filament (2.85mm) for PETG. With improved heat stability, PVA Plus delivers consistent, reliable results. The material is completely soluble in water and therefore very suitable as a support material for 3D projects. PLA Plus is ideal in combination with PETG and has a maximum print temperature of 225°C.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Brand:	REAL
Material:	PVA Plus	Roundness:	above 95 percent
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	35-60 °C	Inner diameter:	Ø 5.5 cm
Colour:	neutral	Spool width:	4.5 cm
Nozzle temp range:	235-255 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFV02003
Length:	60 m

This product is end of life.

Polymaker PolyDissolve natural S1 filament 2.85mm, 0.75kg

Zoom in

Description Polymaker Polydissolve S1 is a soluble filament in the colour natural. With this filament, you have greater design freedom because many new applications are possible. Polydissolve S1 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 2.85mm and a weight of 0.75kg.

Specifications

Tunnel code:	n/a	Brand:	Polymaker
Material:	polydissolve S1	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-60 °C	Spool width:	4.5 cm
Colour:	natural	Filament print speed:	-
Nozzle temp range:	210-225 °C	Hazard class:	n/a
Amount:	0.75 kg	Our item no:	DFP14011

£55.85 (Incl. 20% VAT)
(£46.54 Excl. 20% VAT)

Backorder - Due January

Polymaker PolyDissolve natural S2 filament 2.85mm, 0.5kg

Zoom in

Description Polymaker Polydissolve S2 is a soluble filament in the colour natural. With this filament, you have greater design freedom because many new applications are possible. Polydissolve S2 is a water-soluble support material for filaments based on PLA, TPU, PVB and Nylon. It has perfect adhesion with these materials and at the same time offers good solubility. The natural filament has a diameter of 2.85mm and a weight of 0.5kg.

Specifications

Material:	polydissolve S2	Brand:	Polymaker
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	90-110 °C	Inner diameter:	Ø 5.5 cm
Colour:	natural	Spool width:	4.5 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Our item no:	DFP14013

This product is end of life.

Zortrax DSS Station

Zoom in

Description Use Zortrax's DSS Station to automatically remove water-soluble carriers. Fill the device with water and place your model in the machine. After a few hours, the support structures are removed. The Zortrax DSS Station is suitable for Z-SUPPORT, Z-SUPPORT Plus and Z-SUPPORT Premium materials. It is also compatible with all water-soluble filaments.

Specifications

Tunnel code:	n/a	Brand:	Zortrax
Dimensions:	235 x 238 x 295 mm	Weight:	8.4 kg
Power rating:	1,000 W	Hazard class:	n/a
Input voltage:	110-240V	Our item no:	DAR00830

£538.50 (sold out) (Incl. 20% VAT)
(£448.75 Excl. 20% VAT)

REAL neutral PVA filament 2.85mm, 0.5kg

Zoom in

Description This Real PVA (PolyVinylAlcohol) 2.85 mm filament is a (warm) water-soluble filament that is ideal for use as a support when printing objects with PLA or ABS. This allows you to print objects that would otherwise not be possible. Because the PVA filament reacts very quickly with water, it is very important to store the coil at room temperature under conditions that are as dry as possible after opening. The heated bed can be set to the same temperature as for ABS or PLA.

The maximum printing temperature is 210°C

Read more about printing with PVA filament here .

Compatible with printers from the following brands:
	●	BCN3D	●	LulzBot
	●	Printrbot	●	Ultimaker

Specifications

Tunnel code:	n/a	Roundness:	above 95 percent
Material:	PVA	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.6 cm
Heated bed temp:	0-50 °C	Spool width:	7.0 cm
Colour:	neutral	Hazard class:	n/a
Nozzle temp range:	190-210 °C	Our item no:	DFP02385
Amount:	0.5 kg	Replaces item no:	DFV02001
Brand:	REAL

Order now, we can ship this on Monday!

£33.96 (Incl. 20% VAT)
(£28.30 Excl. 20% VAT)

in stock

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DFR00005
Weight:	0.325 kg

Order now, we can ship this on Monday!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

PVA

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

PVA