Flexible 2.85mm filament 3D filament 2.85mm 123-3D red flexible TPE filament 2.85mm, 0.5kg 123-3d.co.uk

Quantity	Product
No products
Total: £0.00

BASF Ultrafuse silver TPC 45D filament 2.85mm, 0.5kg

Description This silver Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as drive belts and other flexible parts. Other advantages of TPC filament are improved elastic performance and a 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because of the flexibility of this type of filament. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	9006
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 4.9 cm
Colour:	silver	Spool width:	5.7 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00218

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse black TPC 45D filament 2.85mm, 0.5kg

Zoom in

Description The black Ultrafuse® TPC 45D filament is 2.85mm wide and has the right flexibility for most FDM printers. This material has a shore hardness of 45D and is made of Arnitel®Eco, which combines the best properties of rubbers and polyesters. The ideal printing temperature is 230°C to 250°C. For best results, use a heated bed of up to 30°C and place the mouthpiece very close to the bed.

TPC is an extra flexible material, which is especially suitable for printing flexible parts such as miniature tires, drive belts, and bracelets. Other advantages of TPC filament are improved elastic performance and the 50% smaller ecological footprint (compared to other co-polyesters). In addition, this material provides excellent adhesion on the Z-axis, so that the printed layers do not detach even under extreme deformation.

Please note: printers with a 'push' system cannot process Ultrafuse TPC 45D because this type of filament is so flexible. We recommend using this product in a 'pull' printer.

Specifications

Material:	TPC 45D	RAL colour no:	9005
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	0-30 °C	Inner diameter:	Ø 4.9 cm
Colour:	black	Spool width:	5.7 cm
Nozzle temp range:	230-250 °C	Filament print speed:	-
Amount:	0.5 kg	Hazard class:	n/a
Brand:	BASF	Our item no:	DFB00219

£24.88 (sold out) (Incl. 20% VAT)
(£20.73 Excl. 20% VAT)

BASF Ultrafuse transparent TPU 85A filament 2.85mm, 0.75kg

Zoom in

Description This transparent BASF Ultrafuse filament with a diameter of 2.85mm consists of high-quality TPU. Thanks to the shore hardness of 85A, this material is very strong and wear-resistant. Other advantages of the BASF Ultrafuse 85A filament are: high tensile strength, excellent damping, flexibility at low temperatures and high resistance to grease, oxygen and ozone.

The ideal printing temperature is 200°C to 220°C. For best results, use a heated bed of 40°C.

Specifications

Material:	TPU 85A	Brand:	BASF
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	40 °C	Inner diameter:	Ø 5.2 cm
Colour:	transparent	Spool width:	5.2 cm
Nozzle temp range:	200-220 °C	Filament print speed:	-
Amount:	0.75 kg	Hazard class:	n/a
Hardness:	NINJAFLEX	Our item no:	DFB00223

£39.00 (Incl. 20% VAT)
(£32.50 Excl. 20% VAT)

14 day delivery

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 0.5kg

Zoom in

Description This snow white NinjaTek Chinchilla NT filament is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 0.5kg roll contains 2.85mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Material:	TPU	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-40 °C	Inner diameter:	Ø 5.1 cm
Colour:	snow white	Spool width:	5.5 cm
Nozzle temp range:	225-235 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF02102
Hardness:	75A

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

14 day delivery

NinjaTek Chinchilla NT snow white TPE filament 2.85mm, 1kg

Zoom in

Description NinjaTek Chinchilla NT snow white is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing of soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This roll contains 1kg of filament of 2.85mm. NinjaTek Chinchilla NT snow white has been tested for skin safety.

Specifications

Material:	TPU	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-40 °C	Inner diameter:	Ø 5.1 cm
Colour:	snow white	Spool width:	5.5 cm
Nozzle temp range:	225-235 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFF02104
Hardness:	75A

£77.14 (sold out) (Incl. 20% VAT)
(£64.28 Excl. 20% VAT)

NinjaTek Chinchilla NT midnight black TPE filament 3mm, 0.5kg

Zoom in

Description This midnight black NinjaTek Chinchilla NT is the softest filament currently on the market. The filament is composed of various premium TPE resins, making it very durable. This Chinchilla filament is suitable for 3D printing soft parts in, for example, fashion or healthcare. The matte finish results in professional and clean printed parts. This material adheres to standard platforms without the aid of glue or tape. This 1kg roll contains 1.75mm of filament. NinjaTek Chinchilla NT has been tested for skin safety.

Specifications

Material:	TPU	Brand:	NinjaTek
Filament diameter:	2.85 mm	Outer diameter:	Ø 20.0 cm
Heated bed temp:	20-40 °C	Inner diameter:	Ø 5.1 cm
Colour:	midnight black	Spool width:	5.5 cm
Nozzle temp range:	225-235 °C	Hazard class:	n/a
Amount:	0.5 kg	Our item no:	DFF02106
Hardness:	75A

Order now, we can ship this today!

£44.59 (Incl. 20% VAT)
(£37.16 Excl. 20% VAT)

in stock

REAL blue TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description This blue 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimum print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30mm/s to 40mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Material:	TPU	Brand:	REAL
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	blue	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03015

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

14 day delivery

REAL neutral TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description This neutral 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.

The filament has an optimal print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30mm/s to 40 mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.

Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament here.

TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Material:	TPU	Brand:	REAL
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	neutral	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03019

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

14 day delivery

REAL red TPU 98A filament 2.85mm, 0.5kg

Zoom in

Description With this strong and flexible red TPU filament (2.85mm), high-speed 3D printing becomes easy!

This material delivers professional results with objects that are flexible and heat resistant. TPU 98A is suitable for both direct and Bowden style 3D printers. A heated bed is not necessary.

Compatible with printers of the following brands:
	●	BCN3D	●	Luzbot
	●	Printrbot	●	Ultimaker

Specifications

Material:	TPU	RAL colour no:	3020
Filament diameter:	2.85 mm	Roundness:	above 95 percent
Heated bed temp:	0-60 °C	Outer diameter:	Ø 20.0 cm
Colour:	red	Inner diameter:	Ø 5.5 cm
Nozzle temp range:	225-245 °C	Spool width:	4.5 cm
Amount:	0.5 kg	Hazard class:	n/a
Hardness:	98A	Our item no:	DFF03023
Brand:	REAL

Order now, we can ship this today!

£33.11 (Incl. 20% VAT)
(£27.59 Excl. 20% VAT)

in stock

TPU pellets, 1kg (123-3D brand)

Zoom in

Description Make your own flexible filament with these TPU pellets from 123-3D!

With this high-quality transparent granulate you can now get started and determine the colour for your own unique filament. TPU is a flexible and rubber-like material, which gives it excellent resistance to high tensile forces. It has a print temperature of 200°C - 210°C. Ideal for non-slip objects or phone cases.

NOTE: The pellets should be dried before use for optimal quality.

Specifications

Material:	TPU	Brand:	123-3D
Colour:	neutral	Hazard class:	n/a
Amount:	1 kg	Our item no:	DPL00007

Order now, we can ship this today!

£13.49 (Incl. 20% VAT)
(£11.24 Excl. 20% VAT)

in stock

Polymaker PolyFlex TPU-95A High Speed filament 2.85 mm Clear 1 kg

Zoom in

Description The transparent Polymaker PolyFlex TPU95-HF is a high-quality and flexible filament with a diameter of 2.85 mm. This durable material is resistant to high tensile force, UV radiation and sunlight. Another advantage is that you print it at high speed. We advise you to choose this filament if you want to print anti-slip objects or phone covers, for example.

The ideal printing temperature is 200 to 220 °C. For best results, use a heated bed at 25 to 50 °C.

Specifications

Material:	TPU 95HF	Outer diameter:	Ø 20.0 cm
Filament diameter:	2.85 mm	Inner diameter:	Ø 5.5 cm
Heated bed temp:	25-50 °C	Spool width:	6.8 cm
Colour:	transparent	Filament print speed:	-
Nozzle temp range:	200-220 °C	Hazard class:	n/a
Amount:	1 kg	Our item no:	DFP14374
Brand:	Polymaker

£40.65 (Incl. 20% VAT)
(£33.88 Excl. 20% VAT)

14 day delivery

123-3D Filament Spool Holder

Zoom in

Description

A universal and adjustable filament spool holder for your 3D printer. The 123-3D Filament Spool Holder is an essential accessory for any 3D printer. This sturdy and durable spool holder supports a wide range of filaments, keeping your prints smooth and consistent. Thanks to its unique design, the holder is compatible with spool widths from 56mm to 140mm, making it suitable for most filament brands and types on the market.

Specifications

Brand:	123-3D	Hazard class:	n/a
Weight:	0.325 kg	Our item no:	DFR00005

Order now, we can ship this today!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Popular products

Flexible

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Newsletter

Popular products

Flexible