This blue 98A TPU filament with a diameter of 2.85mm is ideal for printing flexible parts such as smartphone cases or anti-slip objects.
The filament has an optimum print temperature between 230°C and 250°C and gives the best results when a slightly lower print speed of 30mm/s to 40mm/s is maintained. The use of a heated bed is recommended and ensures that your prints do not warp during the cooling process.
Objects made of this material are heat-resistant and strong, but at the same time soft and flexible, making the filament a little more difficult to process. To prevent the filament from jamming or being pushed in the wrong direction during printing, the extruder should support the material as much as possible. Read more about the use of flexible TPU and TPE filament
here.
TIP: prevent holes in your 3D print by storing the filament airtight in a dry place.
| Compatible with printers of the following brands: |
|
● |
BCN3D |
● |
Luzbot |
|
● |
Printrbot |
● |
Ultimaker |
1000's products available for Next Day Delivery
