The E3D Revo Belt nozzle 1.75 mm x 0.60 mm is specially designed to improve your belt printing experience. The nozzle is longer to allow printing at a 45 degree angle. Experiment freely with other Revo Belt nozzles, which can be changed by hand in just 60 seconds. These come in 3 different sizes so you always have one that fits your project perfectly. With these nozzles you can print small objects with high resolution or large prints in a short time. The silicone ring shows you at a glance what size the nozzle is. In addition, the size is also engraved to avoid confusion. The Revo belt nozzle comes with a heat break, so you do not have to install it yourself. This means there is less chance of hotend leakage.
Please note: Revo nozzles are not suitable for use with V6 heater blocks. You may also need to adjust your z-offset when you change nozzles.