Stepper motor control Electronics 3D printer parts DRV8825 stepstick driver with heat sink (4-pack) stepper driver 123-3d.co.uk

Quantity	Product
No products
Total: £0.00 (Incl. 0% VAT)

DRV8825 stepstick driver with heat sink (4-pack)

Description Order a 4-pack of DRV8825 stepsticks with 4x heat sinks.

Specifications

Tunnel code:	n/a	Max current:	2.5 A
Length:	20.4 mm	Brand:	123-3D
Operating volt logic:	3.5 - 25V	Hazard class:	n/a
Operating volt vmot:	-	Our item no:	DSD00010
Width:	15.6 mm

Order now, we can ship this tomorrow!

£26.50 (Incl. 20% VAT)
(£22.08 Excl. 20% VAT)

in stock

BigTreeTech TMC5160 Pro V1.1 Driver offer: 4x stepper driver

Zoom in

Description With the BigTreeTech TMC5160 Pro V1.1 control module for stepper motors you have the option to control stepper motors with extra torque. The module is Pololu-compatible and fits most electronics boards for 3D printers. For the best performance, you can configure the module via SPI to get the most out of your engine. The TMC5160 Pro V1.1 is suitable for use up to 56V, so it can easily be connected to a 48V power supply. With sufficient cooling you can generate up to 3A of current for the fastest movements. Finally, the module ensures virtually silent movements thanks to the 1/256 step interpolation.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Quantity:	4	Hazard class:	n/a
Max voltage VDC:	56	Our item no:	DAR00985
Max current:	3 A

£96.50 (sold out) (Incl. 20% VAT)
(£80.42 Excl. 20% VAT)

Stepstick DRV8825 Stepper Motor Driver (123-3D version)

Zoom in

Description The Stepstick DRV8825 is a powerful stepper motor driver and can deliver no less than 2.5A (if properly cooled). It is compatible with Megatronics and the ideal stepper motor driver for current 3D printers.

The Stepstick DRV8825 has the following features:

Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step and 1/32-step
Protected against too high temperatures
Protected against undervoltage
Protected against too high currents
Supports different decay modes
Simple step control interface

Cooling block included (including adhesive layer).

Additional information: data sheet (PDF)

Specifications

Tunnel code:	n/a	Max current:	2.5 A
Length:	20.4 mm	Brand:	123-3D
Operating volt logic:	3.5 - 25V	Hazard class:	n/a
Operating volt vmot:	-	Our item no:	DSD00002
Width:	15.6 mm

Order now, we can ship this tomorrow!

£5.60 (Incl. 20% VAT)
(£4.67 Excl. 20% VAT)

in stock

TMC2100 Stepper Driver | 1/256 step interpolation

Zoom in

Description The TMC2100 is an advanced stepper motor driver with interpolation functionality. For example, it is possible to have 1/256 microsteps on the output with a 1/16 microstep control. This makes the TMC2100 an incredibly quiet driver, so no heavy CPU is needed.

This stepper motor driver comes with a cooling block.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00009

Order now, we can ship this tomorrow!

£14.50 (Incl. 20% VAT)
(£12.08 Excl. 20% VAT)

in stock

TMC2130 Stepper Driver | 1/256 step interpolation

Zoom in

Description The TMC2130 is an advanced step driver with interpolation functionality. For example, it is possible to have 1/256 microsteps on the output with a 1/16 microstep control. This makes the TMC2130 an incredibly quiet driver, so no heavy CPU is needed.

This step driver has the SPI connection at the top and comes with a separate cooling block.

Specifications

Tunnel code:	n/a	Chip:	TMC2130
Max voltage VDC:	38	Min voltage:	5 v/°c
Max current:	2.5 A	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00013

Order now, we can ship this tomorrow!

£16.25 (Incl. 20% VAT)
(£13.54 Excl. 20% VAT)

in stock

TMC2130 Stepper Driver | 1/256 step interpolation v1.1

Zoom in

Description

Specifications

Tunnel code:	n/a	Chip:	TMC2130
Max voltage VDC:	46	Min voltage:	5.5 v/°c
Max current:	2.5 A	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00015

£12.50 (Incl. 20% VAT)
(£10.42 Excl. 20% VAT)

14 day delivery

TL-Smoother including cable

Zoom in

Description With the TL-Smoother you can make your 3D printer even quieter and reduce vibrations.

The smoother is equipped with no less than 8 large diodes that protect your electronics against induction voltages. By using TL-smoother on the X, Y and Z axes of your printer, you get a better print result. The TL-smoother comes with a connection board with 4-pin connectors, so you can easily place the smoother between the stepper motor and the control.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	50 x 30 x 9 mm	Hazard class:	n/a
Cable length:	19 cm	Our item no:	DSD00014

Order now, we can ship this tomorrow!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

TB6600 Step Driver | 3.5A | 1/32 microsteps | 9V - 40V

Zoom in

Description This powerful 3.5A TB6600 external stepper motor driver can be controlled with 5V electronics and is equipped with 6 dip-switches. This makes it easy to adjust the various microsteps and power settings.

Specifications

Tunnel code:	n/a	Chip:	TB6600
Max voltage VDC:	40	Min voltage:	9 v/°c
Max current:	3.5 A	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00012

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

14 day delivery

SL2690A Step Driver | 6.5A | 1/128 microsteps | 20V - 90V

Zoom in

Description The SL2690A is a powerful stepper motor driver with a maximum current of 6.5A.

All settings are made by means of the DIP switches. The current is adjustable from 2.8A to 6.5A and the driver has the option of 25600 microsteps.

NOTE: The SL269 driver is especially suitable for the advanced user.

Manual (PDF)

Specifications

Tunnel code:	n/a	Current rating:	6.5 A
Input voltage:	20-90V	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00008

Order now, we can ship this tomorrow!

£56.95 (Incl. 20% VAT)
(£47.46 Excl. 20% VAT)

in stock

BigTreeTech S42B closed loop drive control board

Zoom in

Description Upgrade your Ender-3 with this closed loop drive control board from BigTreeTech.

The S42B v2.0 is easy to use and significantly improves the performance of your Ender-3. Thanks to the S42B stepper motor driver and the closed loop control board you can now print even quieter, more accurately and more efficiently, even at higher speeds! In addition, the board is equipped with a high-quality OLED screen, so that you do not need a computer for operation.

The packaging consists of:

1x BigTreeTech S42B v2.0
1x OLED display
2x Connection cables
1x Sprocket (for heated bed)
1x Main board adapter
Various screws and parts

Fits the Ender-3, Bigtreetech SKR v1.3, SKR v1.4 (Turbo) and more!

Please note we do not offer support on the installation of this product.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	BIGTREETECH	Our item no:	DAR00615

£37.00 (Incl. 20% VAT)
(£30.83 Excl. 20% VAT)

14 day delivery

TMC2130 Stepper Driver | 1/256 step interpolation v 3.0

Zoom in

Description The TMC2130 v3.0 is a two-phase stepper driver with a standard SPI interface and a step/dir interface. Because the driver is equipped with interpolation functionality, it is possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 75%.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Operating volt logic:	3.3 - 5V	Chip:	TMC2130
Input voltage:	12-24V	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00797

£15.25 (Incl. 20% VAT)
(£12.71 Excl. 20% VAT)

14 day delivery

TMC2208 Stepper Driver | 1/256 step interpolation v 3.0

Zoom in

Description The TMC2208 v3.0 is a single-axis stepper motor drive chip, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2130 v3.0 an incredibly quiet driver, so that no heavy CPU is required. The stepper driver also offers power control, for energy savings of up to 70%.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Operating volt logic:	3.3 - 5V	Chip:	TMC2208
Input voltage:	4.75V-36VDC	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00794

Order now, we can ship this tomorrow!

£5.25 (Incl. 20% VAT)
(£4.38 Excl. 20% VAT)

in stock

TMC2209 Stepper Driver | 1/256 step interpolation v 1.2

Zoom in

Description The TMC2209 stepper driver is a powerful stepper motor driver, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2209 v1.2 an incredibly quiet driver, so that no heavy CPU is required.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Operating volt logic:	3.3 - 5V	Chip:	TMC2209
Input voltage:	5.5V-28V	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00795

This product can be ordered 1 time(s).

This product is end of life.

TMC2225 Stepper Driver | 1/256 step interpolation v 1.0

Zoom in

Description The TMC2225 stepper driver is a powerful stepper motor driver, equipped with interpolation functionality. This makes it possible to have 1/256 microsteps on the output with a 1/16 microstep driver. This makes the TMC2225 v1.0 an incredibly quiet driver, so that no heavy CPU is required.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Operating volt logic:	6.65 - 25V	Chip:	TMC2225
Input voltage:	4.75V-36VDC	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR00796

£5.25 (Incl. 20% VAT)
(£4.38 Excl. 20% VAT)

14 day delivery

BigTreeTech EZ2209 Step Driver

Zoom in

Description The EZ2209 from BigTreeTech's EZ series has the more modern TMC2209 on board, which does support StallGuard compared to the TMC2208. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and works on 12 to 24 Volts.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Tunnel code:	n/a	Chip:	TMC2209
Max current:	2 A	Hazard class:	n/a
Input voltage:	12-24V	Our item no:	DAR01029
Brand:	BIGTREETECH

Order now, we can ship this tomorrow!

£8.45 (Incl. 20% VAT)
(£7.04 Excl. 20% VAT)

in stock

BigTreeTech EZ5160 Pro V1.0 Step Driver

Zoom in

Description With the BigTreeTech EZ5160 you get the most powerful module in the series for optimal 3D printing performance. The TMC5160 is powerful, quiet and accepts up to 48V for fast print movements. With 2.5A maximum current and StallGuard you are assured of the highest reliability and precision. To achieve ultimate performance, you can adjust many settings via the SPI connection.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Tunnel code:	n/a	Current rating:	2.5 A
Input voltage:	-	Hazard class:	n/a
Brand:	BIGTREETECH	Our item no:	DAR01030

Order now, we can ship this tomorrow!

£21.50 (Incl. 20% VAT)
(£17.92 Excl. 20% VAT)

in stock

BigTreeTech EZ2208 V1.0 Step Driver

Zoom in

Description The EZ2208 from BigTreeTech's EZ series offers powerful, quiet stepper motor control. Thanks to the 1/256 step interpolation, a good 3D printing experience can also be achieved on less powerful electronics boards. The parameters of the TMC2208 chip can be further optimized via a UART connection to your microprocessor. With this module you can supply up to 2A current and it works on 12 to 24 Volts.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Tunnel code:	n/a	Chip:	TMC2208
Max current:	2 A	Hazard class:	n/a
Input voltage:	12-24V	Our item no:	DAR01031
Brand:	BIGTREETECH

Order now, we can ship this tomorrow!

£6.50 (Incl. 20% VAT)
(£5.42 Excl. 20% VAT)

in stock

BigTreeTech EZ2130 V1.0 Step Driver

Zoom in

Description The BigTreeTech EZ2130 from the EZ series contains the silent TMC2130 stepper motor driver. This powerful chip can supply up to 2A current and works between 12 and 24 Volts. To achieve optimal performance, the control parameters can be adjusted through communication via SPI. The maximum supported microstepping mode is 1/256 for this driver.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Operating volt logic:	3.3 - 5V	Chip:	TMC2130
Input voltage:	12-24V	Hazard class:	n/a
Max current:	2 A	Our item no:	DAR01032

Order now, we can ship this tomorrow!

£11.50 (Incl. 20% VAT)
(£9.58 Excl. 20% VAT)

in stock

BigTreeTech EZ6609 V1.0 Step Driver

Zoom in

Description The BigTreeTech EZ6609 has the powerful GC6609 chip on board for optimal performance. Various parameters can be adjusted with the UART connection and the driver delivers up to 2A.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Tunnel code:	n/a	Current rating:	1.2 A
Max current:	2 A	Hazard class:	n/a
Input voltage:	12-24V	Our item no:	DAR01033
Brand:	BIGTREETECH

Order now, we can ship this tomorrow!

£7.25 (Incl. 20% VAT)
(£6.04 Excl. 20% VAT)

in stock

BigTreeTech EZ2225 V1.0 Step Driver

Zoom in

Description The BigTreeTech EZ2225 has the TMC2225 chip on board for good 3D printing results at a competitive price. The 1/256 step interpolation offers a quiet 3D printing experience and the control can be further optimized via a UART connection. We recommend using active cooling to get the most out of this chip.

BigTreeTech's EZ series has a compact design for various stepper motor drivers and is suitable for the EZ versions of their electronics board range. If you already have an electronics board with Pololu-compatible 2x8-pin slots, you can use the BigTreeTech EZ-Driver Connector to connect the EZ drivers.

Specifications

Tunnel code:	n/a	Chip:	TMC2225
Max current:	1 A	Hazard class:	n/a
Input voltage:	12-24V	Our item no:	DAR01034
Brand:	BIGTREETECH

Order now, we can ship this tomorrow!

£7.50 (Incl. 20% VAT)
(£6.25 Excl. 20% VAT)

in stock

BigTreeTech EZ-Driver Connector V1.0

Zoom in

Description Convert any BigTreeTech EZ stepper motor driver board to fit into a Pololu-compatible slot. Very useful if you have a board with Pololu-compatible slots, but want to use the compact EZ drivers. BigTreeTech's EZ series offers a variety of powerful stepper motor drivers, but these are not suitable for the 2x8 pin headers found on many 3D printer electronics boards. This module makes it possible to use the EZ drivers! You just need to take into account the extra height of the module compared to the standard stepper motor control boards.

Please note: This module comes without a driver, these are sold separately

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	BIGTREETECH	Stepper driver slots:	1
Stepper type:	-	Our item no:	DAR01036

Order now, we can ship this tomorrow!

£2.45 (Incl. 20% VAT)
(£2.04 Excl. 20% VAT)

in stock

BigTreeTech TMC5160 Pro V1.1 Driver offer: 8x stepper driver

Zoom in

Description With the BigTreeTech TMC5160 Pro V1.1 control module for stepper motors you have the option to control stepper motors with extra torque. The module is Pololu-compatible and fits most electronics boards for 3D printers. For the best performance, you can configure the module via SPI to get the most out of your engine. The TMC5160 Pro V1.1 is suitable for use up to 56V, so it can easily be connected to a 48V power supply. With sufficient cooling you can generate up to 3A of current for the fastest movements. Finally, the module ensures virtually silent movements thanks to the 1/256 step interpolation.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Quantity:	8	Hazard class:	n/a
Max voltage VDC:	56	Our item no:	DAR00986
Max current:	3 A

£189.00 (sold out) (Incl. 20% VAT)
(£157.50 Excl. 20% VAT)

Pololu A4988 Stepper Motor Driver

Zoom in

Description The Pololu A4988 stepper motor driver drives a bipolar stepper motor and has a maximum output current of 2.2A when cooled.

Properties:

Simple step control interface
5 Step resolutions: full step, 1/2 step, 1/4 step, 1/8 step, 1/16 step
Adjustable current output for achieving higher step speeds above the rated voltage of the stepper motor
Intelligent control to automatically switch to the correct power decay: fast decay or slow decay
Automatic shutdown in case of too high temperatures or too high currents
Supplied with all surface-mount components, including A4988 driver

The supplied headers still need to be soldered.

Specifications

Tunnel code:	n/a	Width:	15.2 mm
Length:	20.3 mm	Brand:	123-3D
Operating volt logic:	3.5 - 5V	Hazard class:	n/a
Operating volt vmot:	8 - 35V	Our item no:	DSD00001
Max current:	2 A

Order now, we can ship this tomorrow!

£10.95 (Incl. 20% VAT)
(£9.13 Excl. 20% VAT)

in stock

Pololu DRV8825 Driver Carrier

Zoom in

Description

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	-	Our item no:	DAR00132

Order now, we can ship this tomorrow!

£10.45 (Incl. 20% VAT)
(£8.71 Excl. 20% VAT)

in stock

RAPS128 stepper motor driver

Zoom in

Description RAPS128 is a powerful stepping driver with 1/128 microstepping resolution. The driver is delivered with the heatsink pre-installed. The pinout is compatible with the Stepstick and the Pololu drivers. The current and decay are adjustable with a potentiometer.

Controlling with 1/128 microstepping requires a more powerful processor, such as the Arduino Due boards.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Max voltage VDC:	25	Hazard class:	n/a
Max current:	2.2 A	Our item no:	DSD00006

£17.50 (Incl. 20% VAT)
(£14.58 Excl. 20% VAT)

14 day delivery

Heatsink for Pololu/Stepper Motor Drivers

Zoom in

Description This heatsink can be used for cooling Pololu or Stepstick stepper motor drivers and has a size of 10mm x 10mm x 10mm.

Specifications

Tunnel code:	n/a	Brand:	123-3D
Dimensions:	10 x 10 x 10 mm	Hazard class:	n/a
Material:	aluminium	Our item no:	DSD00004
Colour:	black

Order now, we can ship this tomorrow!

£1.45 (Incl. 20% VAT)
(£1.21 Excl. 20% VAT)

in stock

Ceramic screwdriver flat, 1.8mm x 0.4mm

Zoom in

Description With this flat ceramic screwdriver you can adjust the step drivers of your 3D printer in no time. The screwdriver is 100% insulated, has an anti-static handle and is fitted with a special ceramic head.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Length:	112 mm	Our item no:	DAR00622
Brand:	123-3D

Order now, we can ship this tomorrow!

£3.10 (Incl. 20% VAT)
(£2.58 Excl. 20% VAT)

in stock

Wrecklab PrintHat v2

Zoom in

Description Looking for smooth operation of your 3D printer and extra accuracy when printing?

Introducing the Wrecklab PrintHAT 2 – designed to give you the smoothest and best performance possible. This compact and reliable daughterboard for the Raspberry Pi is smarter, faster and better than its predecessor.

With the PrintHAT 2 you can turn the Raspberry Pi into a powerful controller for 3D printers and small CNC machines. The smart system runs complex computational algorithms on Raspberry PI's powerful CPU, leaving only time-critical tasks to the integrated MCU. As a result, you not only print faster, but also quieter and more accurately.

The main features

A powerful 32-bit processor.
5 state-of-the-art TRINAMICS TMC2209 step drivers.
5 x PWM load.
Improved end stop accuracy via stepper phase detection.
9 configurable IOs.
Sensorless homing.
Extremely quiet operation and smooth movement via StealthChop.
3x 12-bit ADC input.

For beginners and experienced users
The improved installation package makes installation a breeze for beginners or users moving from one controller to another. In addition, there are still more than enough options for the requirements of more experienced users.

Support
The daughterboard supports Klipper, OctoPrint and Mainsails and is suitable for 3D printers, CNC machines and other machines powered by a stepper motor.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	Wrecklab	Our item no:	DAR00354

£86.59 (Incl. 20% VAT)
(£72.16 Excl. 20% VAT)

14 day delivery

External step driver slot v2.0

Zoom in

Description With this external board you can add an extra step driver slot in addition to the on-board locks. The PCBs can be easily connected to each other.

The step driver itself is not included, this is only a step driver slot.

Specifications

Tunnel code:	n/a	Hazard class:	n/a
Brand:	123-3D	Our item no:	DSD00005

£13.95 (Incl. 20% VAT)
(£11.63 Excl. 20% VAT)

14 day delivery

Thermal paste, 5g

Zoom in

Description This thermally conductive paste has a very strong adhesive force and is, among other things, very suitable as a thermal interface between heatsinks and power LEDs, VGA cards, step drivers, etc. In addition, this paste is resistant to high temperatures.

Specifications

Melting capacity:	200°C / 24H	Clotting time:	3 min - 25°C
Evaporation:	0.001% (200 C° / 24h)	Brand:	123-3D
Thermal conductivity:	1.2 W/MK	Volume:	5 grams
Thermal impedance:	-	Our item no:	DSD00003

Order now, we can ship this tomorrow!

£4.60 (Incl. 20% VAT)
(£3.83 Excl. 20% VAT)

in stock

Stepstick DS26LV31T Differential Line Driver (v1.0)

Zoom in

Description

Specifications

Tunnel code:	n/a	Brand:	123-3D
Operating volt logic:	3.3 - 5V	Hazard class:	n/a
Voltage:	5 v	Our item no:	DAR00227

Order now, we can ship this tomorrow!

£7.50 (Incl. 20% VAT)
(£6.25 Excl. 20% VAT)

in stock

Stepstick A4988 stepper motor driver

Zoom in

Description The A4988 stepper motor driver is a driver that can supply up to 2 A when the cooling block is installed. And can be used in the following 5 step resolutions: full-step, half-step, 1/4-step, 1/8-step and 1/16-step.

Cooling block included (including adhesive layer).

Specifications

Tunnel code:	n/a	Brand:	123-3D
Operating volt logic:	3.3 - 5V	Hazard class:	n/a
Operating volt vmot:	8 - 35V	Our item no:	DAR00689
Max current:	2 A

£3.50 (Incl. 20% VAT)
(£2.92 Excl. 20% VAT)

14 day delivery

BigTreeTech TMC2209 Step Driver | 1/256 step interpolation v1.3 | UART

Zoom in

2
1
0

Description The BigTreeTech TMC2209 Step Driver makes skipping steps and jittering a thing of the past. The driver is super quiet and has good heat dissipation. You can choose from 2 modes: STEP/DIR mode and UART mode. In the STEP/DIR mode there are options for 16, 8, 4 or 2 microsteps. For UART mode, you can use both 4th and 5th pin as UART pin. The potentiometer can be adjusted to better suit your project. Turning this meter clockwise reduces the current supplied to the driver. Turning counterclockwise increases the driver's power supply. Be sure to properly mount the driver before using it for heat dissipation. This prevents the driver from working properly.

Please note: place the driver in the correct orientation on the motherboard. If the driver is placed incorrectly, it may burn out.

Specifications

Tunnel code:	n/a	Brand:	BIGTREETECH
Operating volt logic:	3.3 - 5V	Chip:	TMC2209
Input voltage:	-	Hazard class:	n/a
Max current:	2 A	Replaces item no:	DAR00795

£7.10 (Incl. 20% VAT)
(£5.92 Excl. 20% VAT)

14 day delivery

Menu

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Popular products

Stepper motor control

Menu

Search product

My 123-3D.co.uk

Top Rated Seller

Payment options

Follow us on social media

Official dealer

Shopping cart

Featured Product

Newsletter

Popular products

Stepper motor control